In statistics, resampling is any of a variety of methods for doing one of the following:
 Estimating the precision of sample statistics (medians, variances, percentiles) by using subsets of available data (jackknifing) or drawing randomly with replacement from a set of data points (bootstrapping)
 Exchanging labels on data points when performing significance tests (permutation tests, also called exact tests, randomization tests, or rerandomization tests)
 Validating models by using random subsets (bootstrapping, cross validation)
YouTube Encyclopedic

1/5Views:5 3759472 04313 4434 812

✪ The Jackknife

✪ Resampling

✪ MBBC1 Lecture 12 Bootstrapping and resampling

✪ An Introduction to the Permutation Test

✪ The Randomization Test
Transcription
Contents
Bootstrap
Bootstrapping is a statistical method for estimating the sampling distribution of an estimator by sampling with replacement from the original sample, most often with the purpose of deriving robust estimates of standard errors and confidence intervals of a population parameter like a mean, median, proportion, odds ratio, correlation coefficient or regression coefficient. It may also be used for constructing hypothesis tests. It is often used as a robust alternative to inference based on parametric assumptions when those assumptions are in doubt, or where parametric inference is impossible or requires very complicated formulas for the calculation of standard errors. Bootstrapping techniques are also used in the updatingselection transitions of particle filters, genetic type algorithms and related resample/reconfiguration Monte Carlo methods used in computational physics.^{[1]}^{[2]} In this context, the bootstrap is used to replace sequentially empirical weighted probability measures by empirical measures. The bootstrap allows to replace the samples with low weights by copies of the samples with high weights.
Jackknife
Jackknifing, which is similar to bootstrapping, is used in statistical inference to estimate the bias and standard error (variance) of a statistic, when a random sample of observations is used to calculate it. Historically, this method preceded the invention of the bootstrap with Quenouille inventing this method in 1949 and Tukey extending it in 1958.^{[3]}^{[4]} This method was foreshadowed by Mahalanobis who in 1946 suggested repeated estimates of the statistic of interest with half the sample chosen at random.^{[5]} He coined the name 'interpenetrating samples' for this method.
Quenouille invented this method with the intention of reducing the bias of the sample estimate. Tukey extended this method by assuming that if the replicates could be considered identically and independently distributed, then an estimate of the variance of the sample parameter could be made and that it would be approximately distributed as a t variate with n−1 degrees of freedom (n being the sample size).
The basic idea behind the jackknife variance estimator lies in systematically recomputing the statistic estimate, leaving out one or more observations at a time from the sample set. From this new set of replicates of the statistic, an estimate for the bias and an estimate for the variance of the statistic can be calculated.
Instead of using the jackknife to estimate the variance, it may instead be applied to the log of the variance. This transformation may result in better estimates particularly when the distribution of the variance itself may be non normal.
For many statistical parameters the jackknife estimate of variance tends asymptotically to the true value almost surely. In technical terms one says that the jackknife estimate is consistent. The jackknife is consistent for the sample means, sample variances, central and noncentral tstatistics (with possibly nonnormal populations), sample coefficient of variation, maximum likelihood estimators, least squares estimators, correlation coefficients and regression coefficients.
It is not consistent for the sample median. In the case of a unimodal variate the ratio of the jackknife variance to the sample variance tends to be distributed as one half the square of a chi square distribution with two degrees of freedom.
The jackknife, like the original bootstrap, is dependent on the independence of the data. Extensions of the jackknife to allow for dependence in the data have been proposed.
Another extension is the deleteagroup method used in association with Poisson sampling.
Comparison of bootstrap and jackknife
Both methods, the bootstrap and the jackknife, estimate the variability of a statistic from the variability of that statistic between subsamples, rather than from parametric assumptions. For the more general jackknife, the deletem observations jackknife, the bootstrap can be seen as a random approximation of it. Both yield similar numerical results, which is why each can be seen as approximation to the other. Although there are huge theoretical differences in their mathematical insights, the main practical difference for statistics users is that the bootstrap gives different results when repeated on the same data, whereas the jackknife gives exactly the same result each time. Because of this, the jackknife is popular when the estimates need to be verified several times before publishing (e.g., official statistics agencies). On the other hand, when this verification feature is not crucial and it is of interest not to have a number but just an idea of its distribution, the bootstrap is preferred (e.g., studies in physics, economics, biological sciences).
Whether to use the bootstrap or the jackknife may depend more on operational aspects than on statistical concerns of a survey. The jackknife, originally used for bias reduction, is more of a specialized method and only estimates the variance of the point estimator. This can be enough for basic statistical inference (e.g., hypothesis testing, confidence intervals). The bootstrap, on the other hand, first estimates the whole distribution (of the point estimator) and then computes the variance from that. While powerful and easy, this can become highly computer intensive.
"The bootstrap can be applied to both variance and distribution estimation problems. However, the bootstrap variance estimator is not as good as the jackknife or the balanced repeated replication (BRR) variance estimator in terms of the empirical results. Furthermore, the bootstrap variance estimator usually requires more computations than the jackknife or the BRR. Thus, the bootstrap is mainly recommended for distribution estimation." ^{[6]}
There is a special consideration with the jackknife, particularly with the delete1 observation jackknife. It should only be used with smooth, differentiable statistics (e.g., totals, means, proportions, ratios, odd ratios, regression coefficients, etc.; not with medians or quantiles). This could become a practical disadvantage. This disadvantage is usually the argument favoring bootstrapping over jackknifing. More general jackknifes than the delete1, such as the deletem jackknife or the deleteallbut2 Hodges–Lehmann estimator, overcome this problem for the medians and quantiles by relaxing the smoothness requirements for consistent variance estimation.
Usually the jackknife is easier to apply to complex sampling schemes than the bootstrap. Complex sampling schemes may involve stratification, multiple stages (clustering), varying sampling weights (nonresponse adjustments, calibration, poststratification) and under unequalprobability sampling designs. Theoretical aspects of both the bootstrap and the jackknife can be found in Shao and Tu (1995),^{[7]} whereas a basic introduction is accounted in Wolter (2007).^{[8]} The bootstrap estimate of model prediction bias is more precise than jackknife estimates with linear models such as linear discriminant function or multiple regression.^{[9]}
Subsampling
Subsampling is an alternative method for approximating the sampling distribution of an estimator. The two key differences to the bootstrap are: (i) the resample size is smaller than the sample size and (ii) resampling is done without replacement. The advantage of subsampling is that it is valid under much weaker conditions compared to the bootstrap. In particular, a set of sufficient conditions is that the rate of convergence of the estimator is known and that the limiting distribution is continuous; in addition, the resample (or subsample) size must tend to infinity together with the sample size but at a smaller rate, so that their ratio converges to zero. While subsampling was originally proposed for the case of independent and identically distributed (iid) data only, the methodology has been extended to cover time series data as well; in this case, one resamples blocks of subsequent data rather than individual data points. There are many cases of applied interest where subsampling leads to valid inference whereas bootstrapping does not; for example, such cases include examples where the rate of convergence of the estimator is not the square root of the sample size or when the limiting distribution is nonnormal.
Crossvalidation
Crossvalidation is a statistical method for validating a predictive model. Subsets of the data are held out for use as validating sets; a model is fit to the remaining data (a training set) and used to predict for the validation set. Averaging the quality of the predictions across the validation sets yields an overall measure of prediction accuracy. Crossvalidation is employed repeatedly in building decision trees.
One form of crossvalidation leaves out a single observation at a time; this is similar to the jackknife. Another, Kfold crossvalidation, splits the data into K subsets; each is held out in turn as the validation set.
This avoids "selfinfluence". For comparison, in regression analysis methods such as linear regression, each y value draws the regression line toward itself, making the prediction of that value appear more accurate than it really is. Crossvalidation applied to linear regression predicts the y value for each observation without using that observation.
This is often used for deciding how many predictor variables to use in regression. Without crossvalidation, adding predictors always reduces the residual sum of squares (or possibly leaves it unchanged). In contrast, the crossvalidated meansquare error will tend to decrease if valuable predictors are added, but increase if worthless predictors are added.^{[10]}
Permutation tests
A permutation test (also called a randomization test, rerandomization test, or an exact test) is a type of statistical significance test in which the distribution of the test statistic under the null hypothesis is obtained by calculating all possible values of the test statistic under rearrangements of the labels on the observed data points. In other words, the method by which treatments are allocated to subjects in an experimental design is mirrored in the analysis of that design. If the labels are exchangeable under the null hypothesis, then the resulting tests yield exact significance levels; see also exchangeability. Confidence intervals can then be derived from the tests. The theory has evolved from the works of Ronald Fisher and E. J. G. Pitman in the 1930s.
To illustrate the basic idea of a permutation test, suppose we collect random variables and for each individual from two groups and whose sample means are and , and that we want to know whether and come from the same distribution. Let and be the sample size collected from each group. The permutation test is designed to determine whether the observed difference between the sample means is large enough to reject, at some significance level, the null hypothesis H that the data drawn from is from the same distribution as the data drawn from .
The test proceeds as follows. First, the difference in means between the two samples is calculated: this is the observed value of the test statistic, .
Next, the observations of groups and are pooled, and the difference in sample means is calculated and recorded for every possible way of dividing the pooled values into two groups of size and (i.e., for every permutation of the group labels A and B). The set of these calculated differences is the exact distribution of possible differences (for this sample) under the null hypothesis that group labels are exchangeable (i.e., are randomly assigned).
The onesided pvalue of the test is calculated as the proportion of sampled permutations where the difference in means was greater than or equal to . The twosided pvalue of the test is calculated as the proportion of sampled permutations where the absolute difference was greater than or equal to .
Alternatively, if the only purpose of the test is to reject or not reject the null hypothesis, one could sort the recorded differences, and then observe if is contained within the middle % of them, for some significance level . If it is not, we reject the hypothesis of identical probability curves at the significance level.
Relation to parametric tests
Permutation tests are a subset of nonparametric statistics. Assuming that our experimental data come from data measured from two treatment groups, the method simply generates the distribution of mean differences under the assumption that the two groups are not distinct in terms of the measured variable. From this, one then uses the observed statistic ( above) to see to what extent this statistic is special, i.e., the likelihood of observing the magnitude of such a value (or larger) if the treatment labels had simply been randomized after treatment.
In contrast to permutation tests, the distributions underlying many popular "classical" statistical tests, such as the ttest, Ftest, ztest, and χ^{2} test, are obtained from theoretical probability distributions. Fisher's exact test is an example of a commonly used permutation test for evaluating the association between two dichotomous variables. When sample sizes are very large, the Pearson's chisquare test will give accurate results. For small samples, the chisquare reference distribution cannot be assumed to give a correct description of the probability distribution of the test statistic, and in this situation the use of Fisher's exact test becomes more appropriate.
Permutation tests exist in many situations where parametric tests do not (e.g., when deriving an optimal test when losses are proportional to the size of an error rather than its square). All simple and many relatively complex parametric tests have a corresponding permutation test version that is defined by using the same test statistic as the parametric test, but obtains the pvalue from the samplespecific permutation distribution of that statistic, rather than from the theoretical distribution derived from the parametric assumption. For example, it is possible in this manner to construct a permutation ttest, a permutation χ^{2} test of association, a permutation version of Aly's test for comparing variances and so on.
The major drawbacks to permutation tests are that they
 Can be computationally intensive and may require "custom" code for difficulttocalculate statistics. This must be rewritten for every case.
 Are primarily used to provide a pvalue. The inversion of the test to get confidence regions/intervals requires even more computation.
Advantages
Permutation tests exist for any test statistic, regardless of whether or not its distribution is known. Thus one is always free to choose the statistic which best discriminates between hypothesis and alternative and which minimizes losses.
Permutation tests can be used for analyzing unbalanced designs^{[11]} and for combining dependent tests on mixtures of categorical, ordinal, and metric data (Pesarin, 2001). They can also be used to analyze qualitative data that has been quantitized (i.e., turned into numbers). Permutation tests may be ideal for analyzing quantitized data that do not satisfy statistical assumptions underlying traditional parametric tests (e.g., ttests, ANOVA) (Collingridge, 2013).
Before the 1980s, the burden of creating the reference distribution was overwhelming except for data sets with small sample sizes.
Since the 1980s, the confluence of relatively inexpensive fast computers and the development of new sophisticated path algorithms applicable in special situations made the application of permutation test methods practical for a wide range of problems. It also initiated the addition of exacttest options in the main statistical software packages and the appearance of specialized software for performing a wide range of uni and multivariable exact tests and computing testbased "exact" confidence intervals.
Limitations
An important assumption behind a permutation test is that the observations are exchangeable under the null hypothesis. An important consequence of this assumption is that tests of difference in location (like a permutation ttest) require equal variance. In this respect, the permutation ttest shares the same weakness as the classical Student's ttest (the Behrens–Fisher problem). A third alternative in this situation is to use a bootstrapbased test. Good (2005) explains the difference between permutation tests and bootstrap tests the following way: "Permutations test hypotheses concerning distributions; bootstraps test hypotheses concerning parameters. As a result, the bootstrap entails lessstringent assumptions." Bootstrap tests are not exact.
Monte Carlo testing
An asymptotically equivalent permutation test can be created when there are too many possible orderings of the data to allow complete enumeration in a convenient manner. This is done by generating the reference distribution by Monte Carlo sampling, which takes a small (relative to the total number of permutations) random sample of the possible replicates. The realization that this could be applied to any permutation test on any dataset was an important breakthrough in the area of applied statistics. The earliest known reference to this approach is Dwass (1957).^{[12]} This type of permutation test is known under various names: approximate permutation test, Monte Carlo permutation tests or random permutation tests.^{[13]}
After random permutations, it is possible to obtain a confidence interval for the pvalue based on the Binomial distribution. For example, if after random permutations the pvalue is estimated to be , then a 99% confidence interval for the true (the one that would result from trying all possible permutations) is .
On the other hand, the purpose of estimating the pvalue is most often to decide whether , where is the threshold at which the null hypothesis will be rejected (typically ). In the example above, the confidence interval only tells us that there is roughly a 50% chance that the pvalue is smaller than 0.05, i.e. it is completely unclear whether the null hypothesis should be rejected at a level .
If it is only important to know whether for a given , it is logical to continue simulating until the statement can be established to be true or false with a very low probability of error. Given a bound on the admissible probability of error (the probability of finding that when in fact or vice versa), the question of how many permutations to generate can be seen as the question of when to stop generating permutations, based on the outcomes of the simulations so far, in order to guarantee that the conclusion (which is either or ) is correct with probability at least as large as . ( will typically be chosen to be extremely small, e.g. 1/1000.) Stopping rules to achieve this have been developed^{[14]} which can be incorporated with minimal additional computational cost. In fact, depending on the true underlying pvalue it will often be found that the number of simulations required is remarkably small (e.g. as low as 5 and often not larger than 100) before a decision can be reached with virtual certainty.
See also
 Bootstrap aggregating (bagging)
 Genetic algorithms
 Monte Carlo methods
 Nonparametric statistics
 Particle filter
 Random permutation
 Surrogate data testing
References
 ^ Del Moral, Pierre (2004). FeynmanKac formulae. Genealogical and interacting particle approximations. Springer. p. 575.
Series: Probability and Applications
 ^ Del Moral, Pierre (2013). Mean field simulation for Monte Carlo integration. Chapman & Hall/CRC Press. p. 626.
Monographs on Statistics & Applied Probability
 ^ Quenouille, M. H. (1949). Approximate Tests of Correlation in TimeSeries. Journal of the Royal Statistical Society, Series B. 11. pp. 68–84. JSTOR 2983696.
 ^ Tukey, J. W. (1958). "Bias and Confidence in Notquite Large Samples (Preliminary Report)". Annals of Mathematical Statistics. 29 (2): 614. JSTOR 2237363.
 ^ Mahalanobis, P. C. (1946). "Proceedings of a Meeting of the Royal Statistical Society held on July 16th, 1946". Journal of the Royal Statistical Society. 109 (4): 325–370. JSTOR 2981330.
 ^ Shao, J. and Tu, D. (1995). The Jackknife and Bootstrap. SpringerVerlag, Inc. pp. 281.
 ^ Shao, J.; Tu, D. (1995). The Jackknife and Bootstrap. Springer.
 ^ Wolter, K. M. (2007). Introduction to Variance Estimation (Second ed.). Springer.
 ^ Verbyla, D.; Litvaitis, J. (1989). "Resampling methods for evaluating classification accuracy of wildlife habitat models". Environmental Management. 13 (6): 783–787. Bibcode:1989EnMan..13..783V. doi:10.1007/bf01868317.
 ^ Verbyla, D. (1986). "Potential prediction bias in regression and discriminant analysis". Canadian Journal of Forest Research. 16 (6): 1255–1257. doi:10.1139/x86222.
 ^ "Invited Articles" (PDF). Journal of Modern Applied Statistical Methods. 1 (2): 202–522. Fall 2011. Archived from the original (PDF) on May 5, 2003.
 ^ Dwass, Meyer (1957). "Modified Randomization Tests for Nonparametric Hypotheses". Annals of Mathematical Statistics. 28 (1): 181–187. doi:10.1214/aoms/1177707045. JSTOR 2237031.
 ^ Thomas E. Nichols, Andrew P. Holmes (2001). "Nonparametric Permutation Tests For Functional Neuroimaging: A Primer with Examples" (PDF). Human Brain Mapping. 15 (1): 1–25. doi:10.1002/hbm.1058. PMID 11747097.
 ^ Gandy, Axel (2009). "Sequential implementation of Monte Carlo tests with uniformly bounded resampling risk". Journal of the American Statistical Association. 104 (488): 1504–1511. arXiv:math/0612488. doi:10.1198/jasa.2009.tm08368.
 Good, Phillip (2005), Permutation, Parametric and Bootstrap Tests of Hypotheses (3rd ed.), Springer
Bibliography
Introductory statistics
 Good, P. (2005) Introduction to Statistics Through Resampling Methods and R/SPLUS. Wiley. ISBN 0471715751
 Good, P. (2005) Introduction to Statistics Through Resampling Methods and Microsoft Office Excel. Wiley. ISBN 0471731919
 Hesterberg, T. C., D. S. Moore, S. Monaghan, A. Clipson, and R. Epstein (2005). Bootstrap Methods and Permutation Tests.^{[full citation needed]}
 Wolter, K.M. (2007). Introduction to Variance Estimation. Second Edition. Springer, Inc.
Bootstrap
 Efron, Bradley (1979). "Bootstrap methods: Another look at the jackknife". The Annals of Statistics. 7: 1–26. doi:10.1214/aos/1176344552.
 Efron, Bradley (1981). "Nonparametric estimates of standard error: The jackknife, the bootstrap and other methods". Biometrika. 68 (3): 589–599. doi:10.2307/2335441. JSTOR 2335441.
 Efron, Bradley (1982). The jackknife, the bootstrap, and other resampling plans, In Society of Industrial and Applied Mathematics CBMSNSF Monographs, 38.
 Diaconis, P.; Efron, Bradley (1983), "Computerintensive methods in statistics," Scientific American, May, 116130.
 Efron, Bradley; Tibshirani, Robert J. (1993). An introduction to the bootstrap, New York: Chapman & Hall, software.
 Davison, A. C. and Hinkley, D. V. (1997): Bootstrap Methods and their Application, software.
 Mooney, C Z & Duval, R D (1993). Bootstrapping. A Nonparametric Approach to Statistical Inference. Sage University Paper series on Quantitative Applications in the Social Sciences, 07095. Newbury Park, CA: Sage.
 Simon, J. L. (1997): Resampling: The New Statistics.
Jackknife
 Berger, Y.G. (2007). "A jackknife variance estimator for unistage stratified samples with unequal probabilities". Biometrika. 94 (4): 953–964. doi:10.1093/biomet/asm072.
 Berger, Y.G.; Rao, J.N.K. (2006). "Adjusted jackknife for imputation under unequal probability sampling without replacement". Journal of the Royal Statistical Society, Series B. 68 (3): 531–547. doi:10.1111/j.14679868.2006.00555.x.
 Berger, Y.G.; Skinner, C.J. (2005). "A jackknife variance estimator for unequal probability sampling". Journal of the Royal Statistical Society, Series B. 67 (1): 79–89. doi:10.1111/j.14679868.2005.00489.x.
 Jiang, J.; Lahiri, P.; Wan, SM. (2002). "A unified jackknife theory for empirical best prediction with Mestimation". The Annals of Statistics. 30 (6): 1782–810. doi:10.1214/aos/1043351257.
 Jones, H.L. (1974). "Jackknife estimation of functions of stratum means". Biometrika. 61 (2): 343–348. doi:10.2307/2334363. JSTOR 2334363.
 Kish, L.; Frankel, M.R. (1974). "Inference from complex samples". Journal of the Royal Statistical Society, Series B. 36 (1): 1–37.
 Krewski, D.; Rao, J.N.K. (1981). "Inference from stratified samples: properties of the linearization, jackknife and balanced repeated replication methods". The Annals of Statistics. 9 (5): 1010–1019. doi:10.1214/aos/1176345580.
 Quenouille, M.H. (1956). "Notes on bias in estimation". Biometrika. 43 (3–4): 353–360. doi:10.1093/biomet/43.34.353.
 Rao, J.N.K.; Shao, J. (1992). "Jackknife variance estimation with survey data under hot deck imputation". Biometrika. 79 (4): 811–822. doi:10.1093/biomet/79.4.811.
 Rao, J.N.K.; Wu, C.F.J.; Yue, K. (1992). "Some recent work on resampling methods for complex surveys". Survey Methodology. 18 (2): 209–217.
 Shao, J. and Tu, D. (1995). The Jackknife and Bootstrap. SpringerVerlag, Inc.
 Tukey, J.W. (1958). "Bias and confidence in notquite large samples (abstract)". The Annals of Mathematical Statistics. 29 (2): 614.
 Wu, C.F.J. (1986). "Jackknife, Bootstrap and other resampling methods in regression analysis". The Annals of Statistics. 14 (4): 1261–1295. doi:10.1214/aos/1176350142.
Subsampling
 Delgado, M.; RodriguezPoo, J.; Wolf, M. (2001). "Subsampling inference in cube root asymptotics with an application to Manski's maximum score estimator". Economics Letters. 73 (2): 241–250. doi:10.1016/s01651765(01)004943.
 Gonzalo, J.; Wolf, M. (2005). "Subsampling inference in threshold autoregressive models". Journal of Econometrics. 127 (2): 201–224. doi:10.1016/j.jeconom.2004.08.004.
 Politis, D.N.; Romano, J.P. (1994). "Largesample confidence regions based on subsamples under minimal assumptions". The Annals of Statistics. 22 (4): 2031–2050. doi:10.1214/aos/1176325770.
 Politis, D.N.; Romano, J.P.; Wolf, M. (1997). "Subsampling for heteroskedastic time series". Journal of Econometrics. 81 (2): 281–317. doi:10.1016/s03044076(97)865694.
 Politis, D.N., Romano, J.P., and Wolf, M. (1999). Subsampling. Springer, New York.
 Romano, J.P.; Wolf, M. (2001). "Subsampling intervals in autoregressive models with linear time trend". Econometrica. 69 (5): 1283–1314. doi:10.1111/14680262.00242.
Monte Carlo methods
 George S. Fishman (1995). Monte Carlo: Concepts, Algorithms, and Applications, Springer, New York. ISBN 038794527X.
 James E. Gentle (2009). Computational Statistics, Springer, New York. Part III: Methods of Computational Statistics. ISBN 9780387981437.
 Pierre Del Moral (2004). FeynmanKac formulae. Genealogical and Interacting particle systems with applications, Springer, Series Probability and Applications. ISBN 9780387202686
 Pierre Del Moral (2013). Del Moral, Pierre (2013). Mean field simulation for Monte Carlo integration. Chapman & Hall/CRC Press, Monographs on Statistics and Applied Probability. ISBN 9781466504059
 Dirk P. Kroese, Thomas Taimre and Zdravko I. Botev. Handbook of Monte Carlo Methods, John Wiley & Sons, New York. ISBN 9780470177938.
 Christian P. Robert and George Casella (2004). Monte Carlo Statistical Methods, Second ed., Springer, New York. ISBN 0387212396.
 Shlomo Sawilowsky and Gail Fahoome (2003). Statistics via Monte Carlo Simulation with Fortran. Rochester Hills, MI: JMASM. ISBN 0974023604.
Permutation tests
Original references:
 Fisher, R.A. (1935) The Design of Experiments, New York: Hafner
 Pitman, E. J. G. (1937) "Significance tests which may be applied to samples from any population", Royal Statistical Society Supplement, 4: 119130 and 22532 (parts I and II). JSTOR 2984124 JSTOR 2983647
 Pitman, E. J. G. (1938). "Significance tests which may be applied to samples from any population. Part III. The analysis of variance test". Biometrika. 29 (3–4): 322–335. doi:10.1093/biomet/29.34.322.
Modern references:
 Collingridge, D.S. (2013). "A Primer on Quantitized Data Analysis and Permutation Testing". Journal of Mixed Methods Research. 7 (1): 79–95. doi:10.1177/1558689812454457.
 Edgington. E.S. (1995) Randomization tests, 3rd ed. New York: MarcelDekker
 Good, Phillip I. (2005) Permutation, Parametric and Bootstrap Tests of Hypotheses, 3rd ed., Springer ISBN 038798898X
 Good, P (2002). "Extensions of the concept of exchangeability and their applications". Journal of Modern Applied Statistical Methods. 1: 243–247. doi:10.22237/jmasm/1036110240.
 Lunneborg, Cliff. (1999) Data Analysis by Resampling, Duxbury Press. ISBN 0534221106.
 Pesarin, F. (2001). Multivariate Permutation Tests : With Applications in Biostatistics, John Wiley & Sons. ISBN 9780471496700
 Welch, W. J. (1990). "Construction of permutation tests". Journal of the American Statistical Association. 85 (411): 693–698. doi:10.1080/01621459.1990.10474929.
Computational methods:
 Mehta, C. R.; Patel, N. R. (1983). "A network algorithm for performing Fisher's exact test in r x c contingency tables". Journal of the American Statistical Association. 78 (382): 427–434. doi:10.1080/01621459.1983.10477989.
 Mehta, C. R.; Patel, N. R.; Senchaudhuri, P. (1988). "Importance sampling for estimating exact probabilities in permutational inference". Journal of the American Statistical Association. 83 (404): 999–1005. doi:10.1080/01621459.1988.10478691.
 Gill, P. M. W. (2007). "Efficient calculation of pvalues in linearstatistic permutation significance tests". Journal of Statistical Computation and Simulation. 77 (1): 55–61. doi:10.1080/10629360500108053.
Resampling methods
 Good, P. (2006) Resampling Methods. 3rd Ed. Birkhauser.
 Wolter, K.M. (2007). Introduction to Variance Estimation. 2nd Edition. Springer, Inc.
 Pierre Del Moral (2004). FeynmanKac formulae. Genealogical and Interacting particle systems with applications, Springer, Series Probability and Applications. ISBN 9780387202686
 Pierre Del Moral (2013). Del Moral, Pierre (2013). Mean field simulation for Monte Carlo integration. Chapman & Hall/CRC Press, Monographs on Statistics and Applied Probability. ISBN 9781466504059
External links
Current research on permutation tests
 Good, P.I. (2012) Practitioner's Guide to Resampling Methods. [1]
 Good, P.I. (2005) Permutation, Parametric, and Bootstrap Tests of Hypotheses
 Bootstrap Sampling tutorial
 Hesterberg, T. C., D. S. Moore, S. Monaghan, A. Clipson, and R. Epstein (2005): Bootstrap Methods and Permutation Tests, software.
 Moore, D. S., G. McCabe, W. Duckworth, and S. Sclove (2003): Bootstrap Methods and Permutation Tests
 Simon, J. L. (1997): Resampling: The New Statistics.
 Yu, Chong Ho (2003): Resampling methods: concepts, applications, and justification. Practical Assessment, Research & Evaluation, 8(19). (statistical bootstrapping)
 Resampling: A Marriage of Computers and Statistics (ERIC Digests)
Software
 Angelo Canty and Brian Ripley (2010). boot: Bootstrap R (SPlus) Functions. R package version 1.243. Functions and datasets for bootstrapping from the book Bootstrap Methods and Their Applications by A. C. Davison and D. V. Hinkley (1997, CUP).
 Statistics101: Resampling, Bootstrap, Monte Carlo Simulation program
 R package `samplingVarEst': Sampling Variance Estimation. Implements functions for estimating the sampling variance of some point estimators.
 Paired randomization/permutation test for evaluation of TREC results
 Randomization/permutation tests to evaluate outcomes in information retrieval experiments (with and without adjustments for multiple comparisons).
 Bioconductor resamplingbased multiple hypothesis testing with Applications to Genomics.
 permtest: an R package to compare the variability within and distance between two groups within a set of microarray data.
 Bootstrap Resampling: interactive demonstration of hypothesis testing with bootstrap resampling in R.
 Permutation Test: interactive demonstration of hypothesis testing with permutation test in R.