| |
| Names | |
|---|---|
| IUPAC name
Tetraterbium heptaoxide
| |
| Other names
Terbium(III,IV) oxide,
Terbium peroxide | |
| Identifiers | |
3D model (JSmol)
|
|
| ECHA InfoCard | 100.031.675 |
PubChem CID
|
|
CompTox Dashboard (EPA)
|
|
| |
| |
| Properties | |
| Tb4O7 | |
| Molar mass | 747.6972 g/mol |
| Appearance | Dark brown-black hygroscopic solid. |
| Density | 7.3 g/cm3 |
| Melting point | Decomposes to Tb2O3 |
| Insoluble | |
| Hazards | |
| Occupational safety and health (OHS/OSH): | |
Main hazards
|
Oxidising agent. |
| Related compounds | |
Other cations
|
Terbium(III) oxide Terbium(IV) oxide |
Related compounds
|
Cerium(IV) oxide Praseodymium(III,IV) oxide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
Terbium(III,IV) oxide, occasionally called tetraterbium heptaoxide, has the formula Tb4O7, though some texts refer to it as TbO1.75. There is some debate as to whether it is a discrete compound, or simply one phase in an interstitial oxide system. Tb4O7 is one of the main commercial terbium compounds, and the only such product containing at least some Tb(IV) (terbium in the +4 oxidation state), along with the more stable Tb(III). It is produced by heating the metal oxalate, and it is used in the preparation of other terbium compounds. Terbium forms three other major oxides: Tb2O3, TbO2, and Tb6O11.
YouTube Encyclopedic
-
1/2Views:1 094627
-
What is TERBIUM?
-
Terbium Explained in 31 MInutes or Less
Transcription
Synthesis
Tb4O7 is most often produced by ignition of the oxalate or the sulfate in air.[1] The oxalate (at 1000 °C) is generally preferred, since the sulfate requires a higher temperature, and it produces an almost black product contaminated with Tb6O11 or other oxygen-rich oxides.
Chemical properties
Terbium(III,IV) oxide loses O2 when heated at high temperatures; at more moderate temperatures (ca. 350 °C) it reversibly loses oxygen, as shown by exchange with18O2. This property, also seen in Pr6O11 and V2O5, allows it to work like V2O5 as a redox catalyst in reactions involving oxygen. It was found as early as 1916 that hot Tb4O7 catalyses the reaction of coal gas (CO + H2) with air, leading to incandescence and often ignition.[2]
Tb4O7 reacts with atomic oxygen to produce TbO2, but more convenient preparations are available.[3]
- Tb
4O
7 (s) + 6 HCl (aq) → 2 TbO
2 (s) + 2 TbCl
3 (aq) + 3 H
2O (l)
. Tb4O7 reacts with other hot concentrated acids to produce terbium(III) salts. For example, reaction with sulfuric acid gives terbium(III) sulfate. Terbium oxide reacts slowly with hydrochloric acid to form terbium(III) chloride solution, and elemental chlorine. At ambient temperature, complete dissolution might require a month; in a hot water bath, about a week.
Anhydrous terbium(III) chloride can be produced by the ammonium chloride route[4][5][6] In the first step, terbium oxide is heated with ammonium chloride to produce the ammonium salt of the pentachloride:
- Tb4O7 + 22 NH4Cl → 4 (NH4)2TbCl5 + 7 H2O + 14 NH3
In the second step, the ammonium chloride salt is converted to the trichlorides by heating in a vacuum at 350-400 °C:
- (NH4)2TbCl5 → TbCl3 + 2 HCl + 2 NH3
References
- ^ Hartmut Bergmann, Leopold Gmelin (1986). Gmelin Handbook of Inorganic Chemistry, System Number 39. Springer-Verlag. p. 397. ISBN 9783540935254.
- ^ Bissell, D. W.; James, C. (1916). "Gadolinium Sodium Sulfate". Journal of the American Chemical Society. 38 (4): 873–875. doi:10.1021/ja02261a012.
- ^ Edelmann, F.T.; Poremba, P. (1967). Herrmann, W.A. (ed.). Synthetic Methods of Organometallic and Inorganic Chemistry. Vol. 6. Stuttgart: Georg Thieme Verlag. ISBN 3-13-103071-2.
- ^ Brauer, G., ed. (1963). Handbook of Preparative Inorganic Chemistry (2nd ed.). New York: Academic Press.
- ^ Meyer, G. (1989). "The Ammonium Chloride Route to Anhydrous Rare Earth Chlorides—The Example of Ycl 3". The Ammonium Chloride Route to Anhydrous Rare Earth Chlorides-The Example of YCl3. Inorganic Syntheses. Vol. 25. pp. 146–150. doi:10.1002/9780470132562.ch35. ISBN 978-0-470-13256-2.
- ^ Edelmann, F. T.; Poremba, P. (1997). Herrmann, W. A. (ed.). Synthetic Methods of Organometallic and Inorganic Chemistry. Vol. VI. Stuttgart: Georg Thieme Verlag. ISBN 978-3-13-103021-4.
Further reading
- CRC Handbook of Chemistry and Physics (71st ed.). Ann Arbor, Michigan: CRC Press. 1990. ISBN 978-0-8493-0471-2.
- Mellor, J.W. A Comprehensive Treatise on Inorganic and Theoretical Chemistry. London: Longmans, Green & Co. pp. 692–696.
This page was last edited on 23 September 2023, at 03:58