Serving area interface

The serving area interface or service area interface (SAI) is an outdoor enclosure or metal box that allows access to telecommunications wiring.

Alternate names

• Access point (AP)
• Cabinet (cab)
• B-box (breakout box)
• Cross box
• Cross-connect box
• Jumper wire interface (JWI)
• Outside plant interface (OPI)
• Pedestal (ped)
• Primary cross-connection point (PCP) (UK)^[1]
• Secondary cross-connection point (SCP) (UK)^[1]
• Telecom cabinet

Function

The SAI provides the termination of individual twisted pairs of a telephony local loop for onward connection back to the nearest telephone exchange (US: "central office" (CO)) or remote switch, or first to transmission equipment such as a subscriber loop carrier multiplexer and then to the exchange main distribution frame (MDF).

In the United Kingdom, the components from the PCP onwards to the customer are known as "D-side" (distribution side), and from the PCP back to the MDF as the "E-side" (exchange side). In the United States, the connection back to the MDF is known as the F2 (secondary distribution cable) and/or the F1 (main feeder cable) pairs.

SAIs are used in suburban and low-density urban areas, serving some of the same purposes that manholes do in high-density urban areas. Besides a cross connect point, they sometimes contain a DSLAM or more rarely a remote concentrator or both.

See also

• Demarcation point
• Enclosure (electrical)
• Fiber to the telecom enclosure
• Sub-loop unbundling

References

Wikimedia Commons has media related to Serving area interface.

This article related to telecommunications is a stub. You can help Wikipedia by expanding it.

• v
• t
• e

This page was last edited on 23 May 2019, at 09:44