Fiber to the telecom enclosure

Fiber to the Edge (FTTE), fiber to the telecom enclosure (FTTTE), fiber to the zone (FTTZ),^[1] or fibre to the cabinet (FTTC) in the UK, is a networking approach used in the enterprise building (hotels, convention centers, office buildings, hospitals, senior living communities, Multi-Dwelling Units, stadiums, etc.). It is a standards-compliant structured cabling system architecture that extends the optical fiber backbone network from the equipment room directly to a telecommunications enclosure (TE), access node, ONT, or media converter installed in a common space to serve a number of users or devices in a nearby area.

In other words, fiber reaches directly from the main distribution frame of a building out to the edge devices, eliminating or reducing the need for intermediate distribution frames.

Implementation

Its implementation is based on the TIA-569-B “Pathways and Spaces” technical standard, which defines the Telecommunications Enclosure (TE), and TIA/EIA-568-B.1 Addendum 5, which defines the cabling when a TE is used. The FTTE architecture allows for many media choices from the TE to the work area; it may be balanced twisted pair copper, multi-mode optical fiber, or even wireless if an access point is installed in or near the TE.

Depending on the user’s needs, FTTE can be deployed in low-density or high-density configurations. A low-density system might use one or two inexpensive 8-port Ethernet mini-switches as an example (these switches have eight 10/100 Mbit/s Ethernet copper ports and one 1 Gbit/s Ethernet fiber uplink).

A high-density FTTE design might use commonly available 24- or 48-port switches (these switches are configured with one 1 Gbit/s uplink port per twelve 100BASE-TX user ports). This relatively high work area-to-backbone port ratio provides better performance than is typically provided to enterprise users. Both low and high-density FTTE architectures provide excellent performance in terms of bandwidth delivered to the work area.

Pros and cons

• Advantages
  • Low Cost
  • Non-blocking or low-blocking performance better supports convergence
  • Extremely flexible to deploy; supports Moves, Adds & Changes
  • Enables consolidation of electronics into a centralized Telecommunications Room
  • Allows the use of a variety of media from the TE to the user
• Disadvantages
  • TE location is near the user and must be secured

See also

• BICSI
• Fiber in the loop
• Fiber to the x
• Fiber-optic communication
• Hybrid fibre-coaxial
• Network architecture

References

External resources

• TIA Fiber Optic Standardization Subcommittees Archived October 12, 2016, at the Wayback Machine
• Fiber Optics LAN Section of the Telecommunications Industry Association
• Fiber Optics Association

This page was last edited on 27 February 2023, at 09:07