South African Class 6E1, Series 10

E2133 at Nelspruit, 22 October 1990

Type and origin
Power type	Electric
Designer	Union Carriage & Wagon
Builder	Union Carriage & Wagon
Model	UCW 6E1
Build date	1982-1984
Total produced	55
Rebuilder	Transnet Rail Engineering
Rebuild date	2001-2005
Number rebuilt	53 to Class 18E, Series 1

Specifications
Configuration:
• AAR	B-B
• UIC	Bo'Bo'
• Commonwealth	Bo-Bo
Gauge	3 ft 6 in (1,067 mm) Cape gauge
Wheel diameter	1,220 mm (48.03 in)
Wheelbase	11,279 mm (37 ft 0 in)
• Bogie	3,430 mm (11 ft 3 in)
Pivot centres	7,849 mm (25 ft 9 in)
Panto shoes	6,972 mm (22 ft 10+1⁄2 in)
Length:
• Over couplers	15,494 mm (50 ft 10 in)
• Body	14,631 mm (48 ft 0 in)
Width	2,896 mm (9 ft 6 in)
Height:
• Pantograph	4,089 mm (13 ft 5 in)
• Body height	3,937 mm (12 ft 11 in)
Axle load	22,447 kg (49,487 lb)
Adhesive weight	89,788 kg (197,949 lb)
Loco weight	89,788 kg (197,949 lb)
Electric system/s	3 kV DC catenary
Current pickup(s)	Pantographs
Traction motors	Four AEI-283AY
• Rating 1 hour	623 kW (835 hp)
• Continuous	563 kW (755 hp)
Gear ratio	18:67
Loco brake	Air & Regenerative
Train brakes	Air & Vacuum
Couplers	AAR knuckle

Performance figures
Maximum speed	113 km/h (70 mph)
Power output:
• 1 hour	2,492 kW (3,342 hp)
• Continuous	2,252 kW (3,020 hp)
Tractive effort:
• Starting	311 kN (70,000 lbf)
• 1 hour	221 kN (50,000 lbf)
• Continuous	193 kN (43,000 lbf) @ 40 km/h (25 mph)

Career
Operators	South African Railways Spoornet
Class	Class 6E1
Number in class	55
Numbers	E2086-E2140
Delivered	1982-1984
First run	1982
Last run	2005

The South African Railways Class 6E1, Series 10 of 1982 was an electric locomotive.

Between 1982 and 1984, the South African Railways placed 55 Class 6E1, Series 10 electric locomotives with a Bo-Bo wheel arrangement in service.^[1]

YouTube Encyclopedic

1/2
Views:
442
547

Transcription

Manufacturer

The 3 kV DC Class 6E1, Series 10 electric locomotive was designed and built for the South African Railways (SAR) by Union Carriage & Wagon (UCW) in Nigel, Transvaal. The electrical equipment was supplied by the General Electric Company (GEC).^[2]

Between 1982 and 1984, 55 locomotives were delivered, numbered in the range from E2086 to E2140. Like Series 6 to 9, the Series 10 units were equipped with AEI-283AY traction motors. UCW did not allocate builder's numbers to the locomotives it built for the SAR, but used the SAR unit numbers for their record keeping.^[1]

Characteristics

Orientation

These dual cab locomotives had a roof access ladder on one side only, just to the right of the cab access door. The roof access ladder end was marked as the no. 2 end. A corridor along the centre of the locomotive connected the cabs which were identical apart from the fact that the handbrake was located in cab 2. A pantograph hook stick was stowed in a tube, mounted below the lower edge of the locomotive body on the roof access ladder side. The locomotive had one square and two rectangular access panels along the lower half of the body and a large hatch door below the second small window to the right of the side door on the roof access ladder side, and only one square access panel and a large hatch door below the first window immediately to the right of the door on the opposite side.^[1]

Series identifying features

The Class 6E1 was produced in eleven series over a period of nearly sixteen years. While some of the Class 6E1 series are visually indistinguishable from their predecessors or successors, some externally visible changes did occur over the years.^[1]

Series 8 and later locomotives could be distinguished from all older models by the large hatch door on each side.^[1]^[3]

The Series 9 to Series 11 locomotives were visually indistinguishable from each other, but could be distinguished from all earlier models by the rainwater drainage holes on their lower sides. These holes were usually covered by so-called buckets, but the covers were absent on a few locomotives. Another distinction was the end doors, which were recessed into the doorframes on Series 9 to Series 11 locomotives, compared to earlier models which had their end doors flush with the doorframes. In addition, on Series 9 and later, the split side window on the driver's assistant side was replaced by a single rectangular side window with rounded corners. Finally, unlike all earlier models, all four doors on Series 9 to Series 11 locomotives had rounded corners.^[4]

Crew access

The Class 5E, 5E1, 6E and earlier 6E1 locomotives were notoriously difficult to enter from ground level, since their lever-style door handles were at waist level when standing inside the cab. This made it impossible to open the door from outside without first climbing up high enough to reach the door handle, while hanging on to the side handrails with one hand only. Crews therefore often chose to leave the doors ajar when parking and exiting the locomotives.^[5]

Side doors with two interconnected latch handles on the outside, such as those which were introduced on the Class 7E1, with one outside handle mounted near floor level and the other at mid-door level, were also introduced on Class 6E1 locomotives beginning with Series 9.^[6]

Service

The Class 6E1 family saw service all over both 3 kV DC mainline and branch line networks, the smaller Cape Western mainline between Cape Town and Beaufort West and the larger network which covers portions of the Northern Cape, the Free State, Natal, Gauteng, North West and Mpumalanga.^[7]

Rebuilding to Class 18E

Beginning in 2000, Spoornet began a project to rebuild Series 2 to 11 Class 6E1 locomotives to Class 18E, Series 1 and Series 2 at the Transnet Rail Engineering (TRE) workshops at Koedoespoort. In the process, the cab at the no. 1 end was stripped of all controls and the driver's front and side windows were blanked off to have a toilet installed, thereby forfeiting the locomotive's bi-directional ability.^[7]^[8]

Since the driving cab's noise level had to be below 85 decibels, cab 2 was selected as the Class 18E driving cab primarily based on its lower noise level compared to cab 1, which was closer and more exposed to the compressor's noise and vibration. Another factor was the closer proximity of cab 2 to the low voltage switch panel. The fact that the handbrake was located in cab 2 was not a deciding factor but was considered an additional benefit.^[8]

While the earlier Class 6E1, Series 2 to 7 locomotives had been built with a brake system which consisted of various valves connected to each other with pipes, commonly referred to as a "bicycle frame" brake system, the Class 6E1, Series 8 to 11 locomotives were built with an air equipment frame brake system, commonly referred to as a brake rack. Since the design of the rebuilt Class 18E locomotives included the same brake rack, the rebuilding project was begun with the newer series 8 to 11 locomotives to reduce the overall cost of rebuilding.^[8]

By June 2005 all Series 10 locomotives except numbers E2111 and E2134 were rebuilt to Class 18E, Series 1. The fate of the two exceptions is not known and they are presumed to have been scrapped. The numbers and renumbering details of the rebuilt units are listed in the table.^[7]^[8]

**Class 6E1, Series 10 units rebuilt to Class 18E**
Count	6E1 no.	Year built	18E no.	18E series	Year rebuilt	Notes
1	E2086	1982	18-158	1	2004
2	E2087	1982	18-046	1	2002
3	E2088	1982	18-089	1	2003
4	E2089	1983	18-023	1	2002
5	E2090	1983	18-130	1	2004
6	E2091	1983	18-176	1	2004
7	E2092	1983	18-164	1	2005
8	E2093	1983	18-059	1	2002
9	E2094	1983	18-126	1	2004
10	E2095	1983	18-039	1	2002
11	E2096	1983	18-174	1	2004
12	E2097	1983	18-180	1	2005
13	E2098	1983	18-179	1	2005
14	E2099	1983	18-053	1	2002
15	E2100	1983	18-149	1	2004
16	E2101	1983	18-166	1	2003
17	E2102	1983	18-044	1	2002
18	E2103	1983	18-175	1	2004
19	E2104	1983	18-160	1	2005
20	E2105	1983	18-102	1	2003
21	E2106	1983	18-004	1	2001
22	E2107	1983	18-186	1	2005
23	E2108	1983	18-177	1	2004
24	E2109	1983	18-081	1	2003
25	E2110	1983	18-052	1	2002
26	E2112	1983	18-060	1	2002
27	E2113	1983	18-151	1	2004
28	E2114	1983	18-108	1	2004
29	E2115	1983	18-191	1	2005
30	E2116	1983	18-099	1	2003
31	E2117	1983	18-155	1	2004
32	E2118	1983	18-096	1	2003
33	E2119	1983	18-024	1	2002
34	E2120	1983	18-122	1	2004
35	E2121	1983	18-113	1	2004
36	E2122	1983	18-085	1	2003
37	E2123	1983	18-103	1	2003
38	E2124	1983	18-076	1	2003
39	E2125	1983	18-016	1	2002
40	E2126	1984	18-082	1	2003
41	E2127	1984	18-131	1	2004
42	E2128	1984	18-032	1	2002
43	E2129	1984	18-043	1	2002
44	E2130	1984	18-121	1	2004
45	E2131	1984	18-040	1	2002	to 18-862
46	E2132	1984	18-047	1	2002
47	E2133	1984	18-123	1	2004
48	E2135	1984	18-114	1	2004
49	E2136	1984	18-132	1	2004
50	E2137	1984	18-115	1	2004
51	E2138	1984	18-088	1	2003
52	E2139	1984	18-128	1	2004
53	E2140	1984	18-153	1	2004

Liveries

All the Class 6E1, Series 10 locomotives were delivered in the SAR red oxide livery with signal red cowcatchers, yellow whiskers and with the number plates on the sides mounted on three-stripe yellow wings. In the 1990s some of the Series 10 units were repainted in the Spoornet orange livery with a yellow and blue chevron pattern on the cowcatchers.^[9]

References

^ ^a ^b ^c ^d ^e South African Railways Index and Diagrams Electric and Diesel Locomotives, 610mm and 1065mm Gauges, Ref LXD 14/1/100/20, 28 January 1975, as amended
^ "UCW - Electric locomotives" (PDF). The UCW Partnership. Archived from the original (PDF) on 12 October 2007. Retrieved 30 September 2010.
^ Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 128–129. ISBN 0869772112.
^ 18-050 (ex Series 9 E2013) with recessed end door and rounded door corners
^ E1882 with high mounted door handle
^ 18-253 (ex Series 9 E2058) with two door handles
^ ^a ^b ^c Railways of Southern Africa Locomotive Guide, 2002 Edition, (Compiled by John N. Middleton), p57, as amended by Combined Amendment List 4, January 2009
^ ^a ^b ^c ^d Information gathered from the rebuild files of individual locomotives at Transnet Rail Engineering's Koedoespoort shops, or obtained from John Middleton as well as several Transnet employees
^ Soul of A Railway, System 7, Western Transvaal, based in Johannesburg, Part 9. South-Eastwards as far as Volksrust (2nd part) by Les Pivnic. Caption 4. (Accessed on 11 April 2017)

Locomotives of South Africa

Steam

7' ¼" gauge	East London 0-4-0VB Table Bay 0-4-0ST Table Bay 0-4-0T Table Bay 0-4-0WT
Standard gauge	Cape 0-4-0T Blackie Cape 0-4-2 Cape 2-4-0T CGR 0-4-0ST Aid Natal 0-4-0ST Durban Natal 0-4-0WT Natal Natal 4-4-0T Perseverance
Cape gauge Tank engines	CGR 0-4-0ST 1873 CGR 0-4-0ST 1874 CGR 0-4-0ST 1881 CGR 0-4-0ST 1881 Coffee Pot CGR 0-6-0ST CGR 0-6-0T CGR 2-6-0ST 1900 CGR 2-6-0ST 1902 CGR 1st Class 0-4-0ST 1875 CGR 1st Class 0-4-0ST 1876 CGR 1st Class 2-6-0ST CGR 1st Class 4-4-0T CGR 2nd Class 4-4-0T CGR 3rd Class 2-6-0T CGR Railmotor CSAR Class C CSAR Class E CSAR Rack 4-6-4RT CSAR Railmotor Durban's Congella Durban's Edward Innes Durban's John Milne Durban's Sir Albert Port Elizabeth 0-4-0ST Kowie Railway 0-6-0T Kowie Railway 4-4-0T Metropolitan & Suburban 4-6-2T NGR 2-6-0T Durban & Pietermaritzburg NGR Class I 2-6-2T NGR Class K 0-4-0ST NGR Class K 0-6-0ST NGR Class K 2-6-0T NZASM 10 Tonner NZASM 13 Tonner NZASM 14 Tonner NZASM 18 Tonner NZASM 19 Tonner NZASM 32 Tonner NZASM 40 Tonner PPR 26 Tonner PPR 35 Tonner Portuguese SAR Class A SAR Class B SAR Class C SAR Class C1 SAR Class C2 SAR Class D SAR Class E SAR Class F SAR Class G SAR Class H SAR Class H1 SAR Class H2 SAR Class J SAR Class K SAR Railmotor SAR Dock 0-4-0ST SAR Dock 0-4-0T SWA 2-8-0T
Cape gauge Tender engines	CGR 1st Class 2-6-0 1876 BP CGR 1st Class 2-6-0 1876 Kitson CGR 1st Class 2-6-0 1879 CGR 1st Class 2-6-0 1891 CGR 1st Class 4-4-0 CGR 1st Class 4-4-0TT CGR 2nd Class 2-6-2TT CGR 3rd Class 4-4-0 1883 CGR 3rd Class 4-4-0 1884 CGR 3rd Class 4-4-0 1889 CGR 3rd Class 4-4-0 1898 CGR 3rd Class 4-4-0 1901 CGR 3rd Class 4-4-0 1903 CGR 4th Class 4-4-2 CGR 4th Class 4-6-0TT 1880 CGR 4th Class 4-6-0TT 1882 CGR 4th Class 4-6-0TT 1882 Joy CGR 4th Class 4-6-0TT 1884 CGR 5th Class 4-6-0 1890 CGR 5th Class 4-6-0 1891 NGR Havelock NGR Class I SAR Class Exp 1 SAR Class Exp 2 SAR Class Exp 3 SAR Class Exp 4 SAR Class Exp 5 SAR Class Exp 6 SAR Class S SAR Class S1 SAR Class S2 SAR Class 1 SAR Class 1A SAR Class 1B SAR Class 2 SAR Class 2C SAR Class 3 SAR Class 3A SAR Class 3B SAR Class 4 SAR Class 4A SAR Class 5 SAR Class 5A SAR Class 5B SAR Class 6 SAR Class 6A SAR Class 6B SAR Class 6C SAR Class 6D SAR Class 6E SAR Class 6F SAR Class 6G SAR Class 6H SAR Class 6J SAR Class 6K SAR Class 6L SAR Class 6Y SAR Class 6Z SAR Class 7 SAR Class 7A SAR Class 7B SAR Class 7C SAR Class 7D SAR Class 7E SAR Class 7F SAR Class 8 SAR Class 8A SAR Class 8B SAR Class 8C SAR Class 8D SAR Class 8E SAR Class 8F SAR Class 8R SAR Class 8X SAR Class 8Y SAR Class 8Z SAR Class 9 SAR Class 10 SAR Class 10A SAR Class 10B SAR Class 10C SAR Class 10D SAR Class 11 SAR Class 12 SAR Class 12A SAR Class 12B SAR Class 13 SAR Class 14 SAR Class 14A SAR Class 14B SAR Class 14C 1st SAR Class 14C 2nd SAR Class 14C 3rd SAR Class 14C 4th SAR Class 15 SAR Class 15A SAR Class 15B SAR Class 15C SAR Class 15CA SAR Class 15E SAR Class 15F SAR Class 16 SAR Class 16A SAR Class 16B SAR Class 16C SAR Class 16D SAR Class 16DA 1928 SAR Class 16DA 1930 SAR Class 16E SAR Class 17 SAR Class 18 SAR Class 19 SAR Class 19A SAR Class 19B SAR Class 19C SAR Class 19D SAR Class 20 SAR Class 21 SAR Class 23 SAR Class 24 SAR Class 25 SAR Class 25NC SAR Class 26 SAR Katanga SWA 2-8-0
Cape gauge Articulated engines	CGR Fairlie CGR Kitson-Meyer SAR Class FC SAR Class FD SAR Class GA SAR Class GB SAR Class GC SAR Class GCA SAR Class GD SAR Class GDA SAR Class GE SAR Class GEA SAR Class GF SAR Class GG SAR Class GH SAR Class GK SAR Class GL SAR Class GM SAR Class GMA SAR Class GO SAR Class HF SAR Class KM SAR Class MA SAR Class MB SAR Class MC SAR Class MC1 SAR Class MD SAR Class ME SAR Class MF SAR Class MG SAR Class MH SAR Class MJ SAR Class MJ1 SAR Class U
2' 6" gauge	Cape Copper John King & Miner Cape Copper Britannia Cape Copper Caledonia Cape Copper Clara Cape Copper Condenser Cape Copper Scotia Namaqua Copper Pioneer Walvis Bay 2-4-2T Hope
2' & 600mm gauges	ACR Class NG-G16A CGR NG 0-4-0T CGR NG 0-6-0T CGR NG 4-6-2T CGR Type A 2-6-4T CGR Type C 0-4-0T NGR Class N 4-6-2T SAR Dutton SAR NG 0-4-0T SAR Class NG1 SAR Class NG2 SAR Class NG3 SAR Class NG4 SAR Class NG5 SAR Class NG6 SAR Class NG7 SAR Class NG8 SAR Class NG9 SAR Class NG10 SAR Class NG-G11 SAR Class NG-G12 SAR Class NG-G13 SAR Class NG-G14 SAR Class NG15 SAR Class NG-G16 SWA Class Ha SWA Class Hb SWA Class Hc SWA Class Hd SWA Jung SWA Zwillinge

Electric

Amcoal Class E38

Gas-electric

SAR Gas-electric

Diesel

Cape gauge Diesel-electric	PRASA Class Afro 4000 SAR Class DS SAR Class DS1 SAR Class 31-000 SAR Class 32-000 SAR Class 32-200 SAR Class 33-000 SAR Class 33-200 SAR Class 33-400 SAR Class 34-000 SAR Class 34-200 SAR Class 34-400 SAR Class 34-500 SAR Class 34-600 SAR Class 34-800 SAR Class 34-900 SAR Class 35-000 SAR Class 35-200 SAR Class 35-400 SAR Class 35-600 TFR Class 35-800 SAR Class 36-000 SAR Class 36-200 SAR Class 37-000 Spoornet Class 39-000 TFR Class 39-200 TFR Class 43-000 TFR Class 44-000 TFR Class 45-000
2' gauge Diesel-electric	SAR Class 91-000
Cape gauge Diesel-hydraulic	SAR Class 61-000
Cape gauge Electro-diesel	Spoornet Class 38-000

External links

Media related to South African Class 6E1 Series 10 at Wikimedia Commons

This page was last edited on 31 December 2020, at 15:39