To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

South African Clayton Railmotor

From Wikipedia, the free encyclopedia

South African Clayton Railmotor
Clayton Railmotor no. RM11, c. 1929
Type and origin
Power typeSteam
DesignerClayton Carriage and Wagon
BuilderClayton Carriage and Wagon
Build date1928
Total produced1
Specifications
Configuration:
 • Whyte0-4-0+4 (Four-coupled)
 • AARB-2
 • UICB'2'n2t
Driver2nd coupled axle
Gauge3 ft 6 in (1,067 mm) Cape gauge
Pivot centres42 ft 6 in (12,954 mm)
Fuel typeCoal
Boiler:
 • TypeVertical, 72 tubes
CylindersTwo
Valve typePiston
CouplersJohnston link-and-pin
Career
OperatorsSouth African Railways
ClassRailmotor
Number in class1
NumbersRM11
Delivered1929
First run1929

The South African Railways Clayton Railmotor of 1929 was a steam railmotor.

In 1929, the South African Railways acquired a single self-contained steam railmotor for low-volume passenger service. The vehicle was a vertical boilered steam locomotive with a passenger coach as an integral part of the locomotive itself.[1]

Steam railmotors

The first steam railmotors in South Africa were the Cape Government Railways steam railmotor no. M6 and the Central South African Railways steam railmotor no. M2 which were introduced in 1906 and 1907 respectively. During the years since its establishment in 1910, several petrol-driven railmotors had been placed in low-volume passenger service by the South African Railways (SAR). In 1928, despite its declared preference for petrol-engine railcars, the Railways Administration decided to acquire a single experimental steam railmotor.[1][2]

Manufacturer

An order for one steam railmotor was placed with Clayton Carriage and Wagon in June 1928, at a purchase price of £4,780 plus £65 for a spare geared wheelset. Although it was initially intended for Durban, the railmotor was delivered to Cape Town instead. It was erected in the Salt River workshops and numbered RM11. After initial trial runs, the railmotor entered regular service on 24 September 1929.[1]

Characteristics

The vertical boiler of the engine was located to the rear of the front driving compartment and had an outer cylindrical shell and an inner firebox, with the middle portion of the firebox pressed into a square cross-section. The coal bunker and water tank were mounted on the power bogie and the bunker part was separate from the coach body to enable it to swivel with the power bogie. The engine unit had two cylinders with piston valves which drove a spur gear on the driving axle, while the two axles of the power bogie were connected with coupling rods. For bi-directional operation, the railmotor had a second driving cab at the rear end of the coach.[1]

The rear end of the railmotor rode on conventional passenger bogies. The coach had the capacity to seat 30 first class and 35 second class passengers in two compartments and it also had a baggage compartment immediately to the rear of the front driving cab and boiler.[1]

The vehicle was equipped with the old Johnston link-and-pin couplers instead of the new AAR knuckle couplers that were introduced in 1927. The reason was most likely that the commuter carriages in service at the time were all still equipped with the older couplers.

Service

The railmotor was initially placed in service on the Milnerton line for a brief period and often operated with a passenger carriage in tow. When this line was closed to regular traffic on 31 July 1930, the railmotor was transferred to the Cape Flats line.[1][2]

The railmotor fleet was reported as giving good results and accomplishing the objects of economical working and speedier and more comfortable travel compared to steam train services, since mixed trains on branch lines usually resulted in slower passenger service as a result of frequent stops to load or unload goods.[3]

The Clayton railmotor was later used on the Overberg line to Caledon. No more steam railmotors were acquired, however, and all subsequent railmotor models on the SAR were petrol-driven vehicles.[1]

References

  1. ^ a b c d e f g Clayton Steam Rail Coach - From the Dave Rhind Collection, Railway History Group of South Africa, Pinelands, Cape Town.
  2. ^ a b SAR General Manager's Report for 1930, pp. 84-85.
  3. ^ SAR General Manager's Report for 1931, p. 35.
This page was last edited on 7 July 2017, at 13:43
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.