| Development | |
|---|---|
| Designer | Lyle Hess |
| Location | Canada |
| Year | 1982 |
| Builder(s) | Channel Cutter Yachts |
| Role | Cruiser |
| Name | Falmouth Cutter 34 |
| Boat | |
| Displacement | 19,000 lb (8,618 kg) |
| Draft | 5.08 ft (1.55 m) |
| Hull | |
| Type | monohull |
| Construction | fibreglass |
| LOA | 43.00 ft (13.11 m) |
| LWL | 30.83 ft (9.40 m) |
| Beam | 11.58 ft (3.53 m) |
| Engine type | Yanmar 40 hp (30 kW) diesel engine |
| Hull appendages | |
| Keel/board type | long keel |
| Ballast | 6,600 lb (2,994 kg) |
| Rudder(s) | keel and transom-mounted rudder |
| Rig | |
| Rig type | Cutter rig |
| I foretriangle height | 46.50 ft (14.17 m) |
| J foretriangle base | 18.75 ft (5.72 m) |
| P mainsail luff | 41.50 ft (12.65 m) |
| E mainsail foot | 19.00 ft (5.79 m) |
| Sails | |
| Sailplan | Cutter rigged sloop |
| Mainsail area | 394.25 sq ft (36.627 m2) |
| Jib/genoa area | 435.94 sq ft (40.500 m2) |
| Total sail area | 830.19 sq ft (77.127 m2) |
The Falmouth Cutter 34 is a Canadian sailboat that was designed by American naval architect Lyle Hess as a global blue water cruiser and first built in 1982.[1][2]
Hess considered it the best boat he designed.[3]
Production
The design was initially built in South Africa by Ed McNeil, but production ended after about six boats had been built. The rights were acquired in 2003 by Bryan Gittins, who had done wood work for McNeil. Gittins established Channel Cutter Yachts to build the boat in Ladysmith, British Columbia, Canada, where it remains in production. Rather than ship the large and fragile moulds from South Africa to British Columbia, Gittins had McNeil build one last hull and ship that before destroying the moulds. Gittins then built new moulds from that hull.[1][3][4][5]
Design
The Falmouth Cutter 34 is a recreational keelboat, built predominantly of fibreglass, with extensive wooden decks and trim. It has a cutter rig, with an optional gaff rigged mainsail. The hull has a plumb stem, an angled transom, a keel and transom-hung rudder controlled by a tiller and a fixed long keel. It displaces 19,000 lb (8,618 kg) and carries 6,600 lb (2,994 kg) of lead ballast.[1]
The length overall, including the bowsprit and aft boomkin, is 43.00 ft (13.11 m), while the length on deck is 34.00 ft (10.36 m). The boat has a draft of 5.08 ft (1.55 m) with the standard keel.[1]
The boat is fitted with a Japanese Yanmar diesel engine of 40 hp (30 kW) for docking and manoeuvring. The fuel tank holds 60 U.S. gallons (230 L; 50 imp gal) and the fresh water tank has a capacity of 75 U.S. gallons (280 L; 62 imp gal).[1]
The cabin arrangements and accommodation are all custom-built and vary from boat to boat. Depending on the interior finish, the cabin has 71 to 77 in (180 to 200 cm) of headroom.[1]
Operational history
In a 2010 review by Alvah Simon in Cruising World described sailing the boat, "we tacked effortlessly through mere zephyrs and, with the help of an extended waterline due to the near-plumb stem, held impressive speeds of five knots in very light airs. The FC 34 should dash off very respectable noon-to-noon runs under normal passage conditions."[3]
See also
Related development
References
- ^ a b c d e f McArthur, Bruce (2020). "Falmouth Cutter 34 sailboat". sailboatdata.com. Archived from the original on 25 November 2021. Retrieved 26 November 2021.
- ^ McArthur, Bruce (2020). "Lyle C. Hess 1912 - 2002". sailboatdata.com. Archived from the original on 7 January 2021. Retrieved 26 November 2021.
- ^ a b c Simon, Alvah (September 2010). "A Sea Gaucho And his Falmouth Cutter 34" (PDF). Cruising World. Archived (PDF) from the original on 25 November 2021. Retrieved 26 November 2021.
- ^ McArthur, Bruce (2021). "Channel Cutter Yachts". sailboatdata.com. Archived from the original on 25 November 2021. Retrieved 26 November 2021.
- ^ Channel Cutter Yachts. "Falmouth Cutter 34". channelcutteryachts.com. Archived from the original on 25 November 2021. Retrieved 26 November 2021.
External links
This page was last edited on 21 June 2022, at 18:27