ISO/IEC 14443 Identification cards -- Contactless integrated circuit cards -- Proximity cards is an international standard that defines proximity cards used for identification, and the transmission protocols for communicating with it.[1][2][3][4]
YouTube Encyclopedic
-
1/3Views:9655127 359
-
Understand Activation and AntiCollision of ISO/IES 14443A tags
-
Introduction to ISO7816 commands
-
ISO/IEC 27701 - A Simple Explanation
Transcription
Standard
The standard is developed by ISO/IEC JTC 1 (Joint Technical Committee 1) / SC 17 (Subcommittee 17) / WG 8 (Working Group 8).
Parts
- ISO/IEC 14443-1:2018 Part 1: Physical characteristic[1]
- ISO/IEC 14443-2:2020 Part 2: Radio frequency power and signal interface[2]
- ISO/IEC 14443-3:2018 Part 3: Initialization and anticollision[3]
- ISO/IEC 14443-4:2018 Part 4: Transmission protocol[4]
Types
Cards may be Type A and Type B, both of which communicate via radio at 13.56 MHz (RFID HF). The main differences between these types concern modulation methods, coding schemes (Part 2) and protocol initialization procedures (Part 3). Both Type A and Type B cards use the same transmission protocol (described in Part 4). The transmission protocol specifies data block exchange and related mechanisms:
- data block chaining
- waiting time extension
- multi-activation
ISO/IEC 14443 uses following terms for components:
- PCD: proximity coupling device (the card reader)
- PICC: proximity integrated circuit card
Physical size
Part 1 of the standard specifies that the card shall be compliant with ISO/IEC 7810 or ISO/IEC 15457-1, or "an object of any other dimension".[1]
Notable implementations
- Ventra cards used in bus and trains
- MIFARE cards (partial or full implementation, depending on product)
- Biometric passports
- EMV payment cards (PayPass, Visa payWave, ExpressPay)
- National identity cards in the European Economic Area
- Near Field Communication is based on in part, and is compatible with, ISO/IEC 14443
- Calypso, open security standard for transit fare collection systems
- CIPURSE, open security standard for transit fare collection systems
- Nabaztag:tag uses z:tamp and nano:ztag ISO/IEC 14443 Type B.
See also
- ISO/IEC 7816, "with contact" smart card standard
- International Civil Aviation Organization § Standards
- List of ISO standards
- FeliCa
References
- ^ a b c "ISO/IEC 14443-2:2020". ISO. Retrieved 2018-12-12.
- ^ a b "ISO/IEC 14443-2:2020". ISO. Retrieved 2020-07-12.
- ^ a b "ISO/IEC 14443-3:2018". ISO. Retrieved 2018-12-12.
- ^ a b "ISO/IEC 14443-4:2018". ISO. Retrieved 2018-12-12.
External links
- Draft ISO/IEC 14443 standards
- Requirements of ISO/IEC 14443 Type B Proximity Contactless Identification Cards, Application Note, Rev. 2056B–RFID–11/05, Atmel Corporation,
This page was last edited on 7 March 2024, at 06:23