To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

From Wikipedia, the free encyclopedia

Yarn weight refers to the thickness of yarn used by knitters, weavers, crocheters and other fiber artists.

Different yarn weights. From left to right: Top row - Chunky, super bulky. Bottom row - Fingering, sport, worsted.

YouTube Encyclopedic

  • 1/3
    Views:
    20 540
    45 904
    17 361 471
  • Fiber Artists Create With An Overlooked Medium
  • Craft in America: VISIONARIES episode
  • I Made DIY Plastic Pins...it's a good time

Transcription

Importance

Changing yarn weight or needle size can have a significant impact on the finished project, so standardized systems have been spread about, as well as conversion systems for regional standards (especially needle sizes).[1]

Yarn weight is important in achieving the correct gauge or tension for a particular project and can help with yarn substitution. The Craft Yarn Council of America has developed a system that seeks to standardize the labeled weights of yarn.[2] Most yarns state their weight on the ball band but some may not, only giving the composition. Some brands use a standardized numbering system that uses seven ranges of relative thickness of yarn. However there are methods for individuals to gauge weight for themselves.

Wrap method

A way of determining the weight of an unknown yarn is to use the wrapping method. This method is also used to calculate the amount of yarn needed for a project. By this method it is possible to check an unknown weight of yarn with a regular pencil and ruler[3] without unwinding the yarn. Simply slip the pencil under approximately an inch of the strands and count the number of strands.[3]

Wrap the yarn around a large needle or a ruler. Make sure the yarn lies flat. Push the yarn together so there are no gaps between wraps. Smooth it out so it is neither too loose nor too tight. Measure the number of wraps per inch (2.5 cm). For better accuracy, measure the wraps at the center of your yarn sample.

The number of wraps will act as a gauge to assess the thickness of unmarked yarn; for example 12 wraps per inch is 12 WPI, and is used to calculate how much yarn is required for various articles,[3] so that 12 is equivalent to 8 ply (worsted weight, medium weight) yarn.[3]

Swatch methods

A more hands-on method, there is the test swatch and the gauge swatch. Knitting a test swatch requires knitting the yarn into a small, roughly 4 in (10 cm) square textile of even stitches.[4] Comparing this with recommended needle sizes, yarn, and the knitter's own signature tension, allows for adjustments to all of these things. For example, changing needle size is one way to bring the test swatch nearer to an accurate measurement in yarn weight.[4]

The gauge swatch goes further. Not only is it a tool for checking whether yarn conforms to a desired dimension, but it is usually produced with some of the complexities of the intended project (i.e. multiple colors, varied stitches, edgings) making it a much larger test piece. This larger sample is then "dressed" meaning washed, ironed, and subjected to other processes expected of the finished item. It is especially used for items that require a lot of work and time, to avoid dimensional mistakes in the long run.[4]

International standard weights

Below is a table comparing yarn weights in a range of places:

USA [5] UK [6] Australia [7] Germany [citation needed] m/100g [8] Wraps per Inch,[8][9] Recommended knitting needle size, mm,[5][8] Recommended crochet hook size, mm [5] Other names used,[5][8]
0 or Lace 1 ply More than 800 40+ wpi 1.5 - 2.5 1.5 - 2.5 Single, Cobweb, Thread, Zephyr
0 or Lace 2 ply 2 fädig (ply) 600-800 30-40 wpi 1.5 - 2.5 1.5 - 2.5
1 or Super Fine 3 ply 3 ply 3 fädig 500-600 20-30 wpi 2 - 3 2.25 - 3.5 Light Fingering, Sock, Baby
1 or Super Fine 4 ply 4 ply 4 fädig 350-450 14-24 wpi 2 - 3 2.25 - 3.5 Fingering, Sock, Baby
2 or Fine 5 ply 6 fädig 250-350 12-18 wpi 3 - 4 3.5 - 4.5 Sport, Baby, 3-ply (obsolete American)
3 or Light DK (Double Knit) or 8 ply 8 ply 200-250 11-15 wpi 4 - 4.5 4.5 - 5.5 Light Worsted, DK
4 or Medium Worsted, Aran, Triple Knit (rare) 10 or 12 ply 120-200 9-12 wpi 4.5 - 5.5 5.5 - 6.5 Worsted, Afghan, Fisherman, 4-ply (obsolete American)
5 or Bulky Chunky, Double Double Knit (rare) 12 or 16 ply 100-130 6-8 wpi 5.5 - 8 6.5 - 9 Craft, Rug
6 or Super Bulky Super Chunky Less than 100 5-6 wpi >8 >9 Roving
7 or Jumbo Less than 100 n/a 12.75 mm and larger 15 mm and larger Roving

Fabric

Equations may be used to determine the weight of warp and weft required for a particular fabric:

  • Weight of warp = (0.65 x qty. of fabric (metres) x no. of warp ends) / count

If there are two colors in the warp, use the following equations:

  • Weight of color A (kg) = (0.65 x qty. of fabric (metres) x no. of warp ends of color A) / count of color A
  • Weight of color B (kg) = (0.65 x Qty. of fabric (metres) x no. of warp ends of color B) / count of color B

If the counts of two warps are the same:

  • Weight of color A (kg) = (total weight of warp reqd. x no. of ends of color A) / total no. of warp ends
  • Weight of color B (kg) = (total weight of warp reqd. x no. of ends of color B) / total no. of warp ends

or

  • Weight of color (B) = total weight of warp reqd. - weight of color A
  • Weight of weft = (0.6 x qty. of fabric (metres) x PPI x reed space) / count

If there are two colors in the weft:

  • Weight of color A (kg) = (0.6 x qty. of fabric (metres) x PPI of color A x reed space) / count of color A
  • Weight of color B (kg) = (0.6 x qty. of fabric (metres) x PPI of color B x reed space) / count of color B

or

  • Weight of color (B) = total weight of weft reqd. - weight of color A
  • Another formula
  1. Reed x width / 7000 = Ans

See also

References

  1. ^ "Knitbuddies Crochet and Knitting Needle Conversion Charts".
  2. ^ The CYC weight system can be found at http://www.craftyarncouncil.com/weight.html
  3. ^ a b c d Wraps per inch with tables
  4. ^ a b c The Principles of Knitting By June Hiatt, Simon & Schuster. p.457
  5. ^ a b c d "Standard Yarn Weight System | Welcome to the Craft Yarn Council". craftyarncouncil.com. Retrieved 2014-07-12.
  6. ^ "Knitting Stuff - Conversion Tables". knitting.stuff.freeuk.com. Retrieved 2014-07-12.
  7. ^ "Ultimate Guide to Yarn Weights". knittingauthority.com. Retrieved 2018-03-01.
  8. ^ a b c d "Yarn Comparison Chart". knitting-naturally.com. Retrieved 2014-07-12.
  9. ^ "Hand Knitting Yarn Sizes - there is no truly meaningful size system". paternoster.orpheusweb.co.uk. Retrieved 2014-07-12.
This page was last edited on 18 October 2023, at 07:54
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.