To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Weidely Motors Company

From Wikipedia, the free encyclopedia

Weidely Motors Company
IndustryAutomotive
Founded1914; 110 years ago (1914)
FounderGeorge Weidely and H.O. Smith
Headquarters,

Weidely Motors Company was an early motor company based in Indianapolis, IN. Weidely started in 1915.[1] It made engines for Premier, Chalmers, Cletrac crawlers and Owen Magnetic cars.[2] They also made a V-12 engine for the 1917 Pathfinder and 1920 Heine-Velox,[2] as well as the 1916-1918 Austin, Hal and Kissel cars.[3]

George Weidely and H.O. Smith, started the Premier Motor Manufacturing Company on December 24, 1902.[1] Weidely was an innovative engine designer and created an early overhead valve V-12.[1] Premier went into receivership in 1914 so they took the rights and development of the Premier engine and formed the Weidely Engine Company in partnership with R.M. Owen who was president of the Entz Motor Corporation.[1] Research has not revealed when the company closed but it made engines for Cletrac up to 1932.[2]

When comparing later OHC Chalmers power plants to the T head or L head engines of the pre-World War I period, their specifications cannot be ignored. The Chalmers' two-roller-bearing-crankshaft F-head engine of 1910 had been a surprising performer, with a streamlined intake manifold feeding the cylinders via extremely large intake valves located in the head. The exhaust side valves were in a pocket, leaving a lot of room in the cylinder head for the inlets.

In 1915, Chalmers made a great step forward with the incorporation of a full-overhead-camshaft Weidley engine, which pioneered the idea of driving the overhead-camshaft from the middle of the crankshaft instead of from the front or the rear. The model 6-40 had a bore and stroke of 3.125 and 5 inches, respectively, and camshaft rigidity was obtained by using a 2.25-inch diameter. The location of the camshaft drive in the center made it necessary to have four main bearings instead of the usual three. Tubular connecting rods were also used, which was a very advanced idea for its day.[4]

Weidely produced a three main bearing pushrod ohv six that powered the Auburn 6-63 models of 1923 and 1924. Unlike most pushrod designs of the day its valvetrain was fully enclosed.[5]

References

  1. ^ a b c d "The Great Pathfinder – "King of the Twelves"". Old Motor company. Retrieved 28 January 2020.
  2. ^ a b c "AACA history". AACA. 10 November 2018. Retrieved 28 January 2020.
  3. ^ "Motor Record, Volume 3, Number 1". Motor Record. January 1918. p. 176.
  4. ^ "Bulb Horn Magazine, Volume 37, Issue 6". Bulb Horn Magazine. 1976. pp. 30–34.
  5. ^ "Motor Record, Volume 11, Number 5". Motor Record. April 1922. p. 6.
This page was last edited on 21 February 2024, at 15:25
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.