Linearized gravity

General relativity
${\displaystyle G_{\mu \nu }+\Lambda g_{\mu \nu }={\kappa }T_{\mu \nu }}$
Introduction History Timeline Tests Mathematical formulation
Fundamental concepts Equivalence principle Special relativity World line Pseudo-Riemannian manifold
Phenomena Kepler problem Gravitational lensing Gravitational red shift Gravitational time dilation Gravitational waves Frame-dragging Geodetic effect Event horizon Singularity Black hole Spacetime Spacetime diagrams Minkowski spacetime Einstein–Rosen bridge
Equations Formalisms Equations Linearized gravity Einstein field equations Friedmann Geodesics Mathisson–Papapetrou–Dixon Hamilton–Jacobi–Einstein Formalisms ADM BSSN Post-Newtonian Advanced theory Kaluza–Klein theory Quantum gravity
Solutions Schwarzschild (interior) Reissner–Nordström Gödel Kerr Kerr–Newman Kerr–Newman–de Sitter Kasner Lemaître–Tolman Taub–NUT Milne Robertson–Walker Oppenheimer–Snyder pp-wave van Stockum dust Weyl−Lewis−Papapetrou
Scientists Einstein Lorentz Hilbert Poincaré Schwarzschild de Sitter Reissner Nordström Weyl Eddington Friedman Milne Zwicky Lemaître Oppenheimer Gödel Wheeler Robertson Bardeen Walker Kerr Chandrasekhar Ehlers Penrose Hawking Raychaudhuri Taylor Hulse van Stockum Taub Newman Yau Thorne others
Physics portal  Category
v t e

In the theory of general relativity, linearized gravity is the application of perturbation theory to the metric tensor that describes the geometry of spacetime. As a consequence, linearized gravity is an effective method for modeling the effects of gravity when the gravitational field is weak. The usage of linearized gravity is integral to the study of gravitational waves and weak-field gravitational lensing.

Weak-field approximation

The Einstein field equation (EFE) describing the geometry of spacetime is given as (using natural units)

${\displaystyle R_{\mu \nu }-{\frac {1}{2}}Rg_{\mu \nu }=8\pi GT_{\mu \nu }}$

where ${\displaystyle R_{\mu \nu }}$ is the Ricci tensor, ${\displaystyle R}$ is the Ricci scalar, ${\displaystyle T_{\mu \nu }}$ is the energy–momentum tensor, and ${\displaystyle g_{\mu \nu }}$ is the spacetime metric tensor that represents the solutions of the equation.

Although succinct when written out using Einstein notation, hidden within the Ricci tensor and Ricci scalar are exceptionally nonlinear dependencies on the metric which render the prospect of finding exact solutions impractical in most systems. However, when describing particular systems for which the curvature of spacetime is small (meaning that terms in the EFE that are quadratic in ${\displaystyle g_{\mu \nu }}$ do not significantly contribute to the equations of motion), one can model the solution of the field equations as being the Minkowski metric^[note 1] ${\displaystyle \eta _{\mu \nu }}$ plus a small perturbation term ${\displaystyle h_{\mu \nu }}$. In other words:

${\displaystyle g_{\mu \nu }=\eta _{\mu \nu }+h_{\mu \nu },\qquad |h_{\mu \nu }|\ll 1.}$

In this regime, substituting the general metric ${\displaystyle g_{\mu \nu }}$ for this perturbative approximation results in a simplified expression for the Ricci tensor:

${\displaystyle R_{\mu \nu }={\frac {1}{2}}(\partial _{\sigma }\partial _{\mu }h_{\nu }^{\sigma }+\partial _{\sigma }\partial _{\nu }h_{\mu }^{\sigma }-\partial _{\mu }\partial _{\nu }h-\square h_{\mu \nu }),}$

where ${\displaystyle h=\eta ^{\mu \nu }h_{\mu \nu }}$ is the trace of the perturbation, ${\displaystyle \partial _{\mu }}$ denotes the partial derivative with respect to the ${\displaystyle x^{\mu }}$ coordinate of spacetime, and ${\displaystyle \square =\eta ^{\mu \nu }\partial _{\mu }\partial _{\nu }}$ is the d'Alembert operator.

Together with the Ricci scalar,

${\displaystyle R=\eta _{\mu \nu }R^{\mu \nu }=\partial _{\mu }\partial _{\nu }h^{\mu \nu }-\square h,}$

the left side of the field equation reduces to

${\displaystyle R_{\mu \nu }-{\frac {1}{2}}Rg_{\mu \nu }={\frac {1}{2}}(\partial _{\sigma }\partial _{\mu }h_{\nu }^{\sigma }+\partial _{\sigma }\partial _{\nu }h_{\mu }^{\sigma }-\partial _{\mu }\partial _{\nu }h-\square h_{\mu \nu }-\eta _{\mu \nu }\partial _{\rho }\partial _{\lambda }h^{\rho \lambda }+\eta _{\mu \nu }\square h).}$

and thus the EFE is reduced to a linear, second order partial differential equation in terms of ${\displaystyle h_{\mu \nu }}$.

Gauge invariance

The process of decomposing the general spacetime ${\displaystyle g_{\mu \nu }}$ into the Minkowski metric plus a perturbation term is not unique. This is due to the fact that different choices for coordinates may give different forms for ${\displaystyle h_{\mu \nu }}$. In order to capture this phenomenon, the application of gauge symmetry is introduced.

Gauge symmetries are a mathematical device for describing a system that does not change when the underlying coordinate system is "shifted" by an infinitesimal amount. So although the perturbation metric ${\displaystyle h_{\mu \nu }}$ is not consistently defined between different coordinate systems, the overall system which it describes is.

To capture this formally, the non-uniqueness of the perturbation ${\displaystyle h_{\mu \nu }}$ is represented as being a consequence of the diverse collection of diffeomorphisms on spacetime that leave ${\displaystyle h_{\mu \nu }}$ sufficiently small. Therefore to continue, it is required that ${\displaystyle h_{\mu \nu }}$ be defined in terms of a general set of diffeomorphisms then select the subset of these that preserve the small scale that is required by the weak-field approximation. One may thus define ${\displaystyle \phi }$ to denote an arbitrary diffeomorphism that maps the flat Minkowski spacetime to the more general spacetime represented by the metric ${\displaystyle g_{\mu \nu }}$. With this, the perturbation metric may be defined as the difference between the pullback of ${\displaystyle g_{\mu \nu }}$ and the Minkowski metric:

${\displaystyle h_{\mu \nu }=(\phi ^{*}g)_{\mu \nu }-\eta _{\mu \nu }.}$

The diffeomorphisms ${\displaystyle \phi }$ may thus be chosen such that ${\displaystyle |h_{\mu \nu }|\ll 1}$.

Given then a vector field ${\displaystyle \xi ^{\mu }}$ defined on the flat, background spacetime, an additional family of diffeomorphisms ${\displaystyle \psi _{\epsilon }}$ may be defined as those generated by ${\displaystyle \xi ^{\mu }}$ and parameterized by ${\displaystyle \epsilon >0}$. These new diffeomorphisms will be used to represent the coordinate transformations for "infinitesimal shifts" as discussed above. Together with ${\displaystyle \phi }$, a family of perturbations is given by

${\displaystyle {\begin{aligned}h_{\mu \nu }^{(\epsilon )}&=[(\phi \circ \psi _{\epsilon })^{*}g]_{\mu \nu }-\eta _{\mu \nu }\\&=[\psi _{\epsilon }^{*}(\phi ^{*}g)]_{\mu \nu }-\eta _{\mu \nu }\\&=\psi _{\epsilon }^{*}(h+\eta )_{\mu \nu }-\eta _{\mu \nu }\\&=(\psi _{\epsilon }^{*}h)_{\mu \nu }+\epsilon \left[{\frac {(\psi _{\epsilon }^{*}\eta )_{\mu \nu }-\eta _{\mu \nu }}{\epsilon }}\right].\end{aligned}}}$

Therefore, in the limit ${\displaystyle \epsilon \rightarrow 0}$,

${\displaystyle h_{\mu \nu }^{(\epsilon )}=h_{\mu \nu }+\epsilon {\mathcal {L}}_{\xi }\eta _{\mu \nu }}$

where ${\displaystyle {\mathcal {L}}_{\xi }}$ is the Lie derivative along the vector field ${\displaystyle \xi _{\mu }}$.

The Lie derivative works out to yield the final gauge transformation of the perturbation metric ${\displaystyle h_{\mu \nu }}$:

${\displaystyle h_{\mu \nu }^{(\epsilon )}=h_{\mu \nu }+\epsilon (\partial _{\mu }\xi _{\nu }+\partial _{\nu }\xi _{\mu }),}$

which precisely define the set of perturbation metrics that describe the same physical system. In other words, it characterizes the gauge symmetry of the linearized field equations.

Choice of gauge

By exploiting gauge invariance, certain properties of the perturbation metric can be guaranteed by choosing a suitable vector field ${\displaystyle \xi ^{\mu }}$.

Transverse gauge

To study how the perturbation ${\displaystyle h_{\mu \nu }}$ distorts measurements of length, it is useful to define the following spatial tensor:

${\displaystyle s_{ij}=h_{ij}-{\frac {1}{3}}\delta ^{kl}h_{kl}\delta _{ij}}$

(Note that the indices span only spatial components: ${\displaystyle i,j\in \{1,2,3\}}$). Thus, by using ${\displaystyle s_{ij}}$, the spatial components of the perturbation can be decomposed as

${\displaystyle h_{ij}=s_{ij}-\Psi \delta _{ij}}$

where ${\displaystyle \Psi ={\frac {1}{3}}\delta ^{kl}h_{kl}}$.

The tensor ${\displaystyle s_{ij}}$ is, by construction, traceless and is referred to as the strain since it represents the amount by which the perturbation stretches and contracts measurements of space. In the context of studying gravitational radiation, the strain is particularly useful when utilized with the transverse gauge. This gauge is defined by choosing the spatial components of ${\displaystyle \xi ^{\mu }}$ to satisfy the relation

${\displaystyle \nabla ^{2}\xi ^{j}+{\frac {1}{3}}\partial _{j}\partial _{i}\xi ^{i}=-\partial _{i}s^{ij},}$

then choosing the time component ${\displaystyle \xi ^{0}}$ to satisfy

${\displaystyle \nabla ^{2}\xi ^{0}=\partial _{i}h_{0i}+\partial _{0}\partial _{i}\xi ^{i}.}$

After performing the gauge transformation using the formula in the previous section, the strain becomes spatially transverse:

${\displaystyle \partial _{i}s_{(\epsilon )}^{ij}=0,}$

with the additional property:

${\displaystyle \partial _{i}h_{(\epsilon )}^{0i}=0.}$

Synchronous gauge

The synchronous gauge simplifies the perturbation metric by requiring that the metric not distort measurements of time. More precisely, the synchronous gauge is chosen such that the non-spatial components of ${\displaystyle h_{\mu \nu }^{(\epsilon )}}$ are zero, namely

${\displaystyle h_{0\nu }^{(\epsilon )}=0.}$

This can be achieved by requiring the time component of ${\displaystyle \xi ^{\mu }}$ to satisfy

${\displaystyle \partial _{0}\xi ^{0}=-h_{00}}$

and requiring the spatial components to satisfy

${\displaystyle \partial _{0}\xi ^{i}=\partial _{i}\xi ^{0}-h_{0i}.}$

Harmonic gauge

The harmonic gauge (also referred to as the Lorenz gauge^[note 2]) is selected whenever it is necessary to reduce the linearized field equations as much as possible. This can be done if the condition

${\displaystyle \partial _{\mu }h_{\nu }^{\mu }={\frac {1}{2}}\partial _{\nu }h}$

is true. To achieve this, ${\displaystyle \xi _{\mu }}$ is required to satisfy the relation

${\displaystyle \square \xi _{\mu }=-\partial _{\nu }h_{\mu }^{\nu }+{\frac {1}{2}}\partial _{\mu }h.}$

Consequently, by using the harmonic gauge, the Einstein tensor ${\displaystyle G_{\mu \nu }=R_{\mu \nu }-{\frac {1}{2}}Rg_{\mu \nu }}$ reduces to

${\displaystyle G_{\mu \nu }=-{\frac {1}{2}}\square \left(h_{\mu \nu }^{(\epsilon )}-{\frac {1}{2}}h^{(\epsilon )}\eta _{\mu \nu }\right).}$

Therefore, by writing it in terms of a "trace-reversed" metric, ${\displaystyle {\bar {h}}_{\mu \nu }^{(\epsilon )}=h_{\mu \nu }^{(\epsilon )}-{\frac {1}{2}}h^{(\epsilon )}\eta _{\mu \nu }}$, the linearized field equations reduce to

${\displaystyle \square {\bar {h}}_{\mu \nu }^{(\epsilon )}=-16\pi GT_{\mu \nu }.}$

Which can be solved exactly using the wave solutions that define gravitational radiation.

See also

Notes

Further reading

• Sean M. Carroll (2003). Spacetime and Geometry, an Introduction to General Relativity. Pearson. ISBN 978-0805387322.

This page was last edited on 18 February 2024, at 08:26