| Schoolboy | |
|---|---|
| Role | Paramotor |
| National origin | Czech Republic |
| Manufacturer | Walkerjet |
| Designer | Victor Procházka |
| Introduction | 2000s |
| Status | Production completed |
The Walkerjet Schoolboy is a Czech paramotor that was designed by Victor Procházka and produced by Walkerjet of Třemošná for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.[1]
Design and development
The Schoolboy was designed as a trainer to comply with the US FAR 103 Ultralight Vehicles rules as well as European regulations. It features a paraglider-style wing, two-place accommodation and a single engine in pusher configuration with a reduction drive and a fixed pitch two-bladed wooden propeller. The aircraft is built from a combination of bolted aluminium and 4130 steel tubing and is noted for its reinforced chassis. The propeller cage can be dismantled for ground transport or storage.[1]
As is the case with all paramotors, take-off and landing is accomplished by foot. Inflight steering is accomplished via handles that actuate the canopy brakes, creating roll and yaw.[1]
Specifications (Schoolboy)
Data from Bertrand[1]
General characteristics
- Crew: one
- Capacity: one passenger
- Powerplant: 1 × single cylinder, two-stroke, air-cooled aircraft engine, with a reduction drive
- Propellers: 2-bladed wooden, fixed pitch
References
This page was last edited on 12 December 2022, at 01:25