To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.

From Wikipedia, the free encyclopedia

In television broadcasting, VIT signals (vertical interval test signals) are a group of test signals inserted in the composite video signal. These signals are used to weight[1] the transmission characteristics of the system between the test generator and the output of the demodulator, where the system includes the microwave links, or TVROs as well as the TV transmitters and the transposers. There are both ATSC and EBU standards for VIT. (Because analogue television is being phased out globally, VIT standards are considered superseded.)

Blanking in CVS

In a composite video signal (CVS) there are two types of blanking: horizontal and vertical. Horizontal blanking is between lines and vertical blanking is between fields (half frames). In a poorly tuned TV receiver the horizontal blanking can be seen at the right or left of the image and the vertical blanking can be seen at the top or bottom of the image. VIT signals are inserted in the vertical blanking.

Vertical blanking

In each field vertical blanking is about 1612 μs in System B (also G and H; analogue system in most of Europe) and 1333 μs in System M (analogue TV system in USA). This duration is equal to 25 lines in system B and 21 lines in system M.[2] Although 7.5 lines are used for synchronization of the image, the remaining lines can be used for other purposes.[3] Two of these lines in each field are reserved for test signals. Since there are two fields in each frame (image), the number of lines reserved for test signals is four per frame.

Test signals

In both systems, line numbers 17 and 18 are assigned for VIT signals in each field. (These line numbers are used just for the first field. For second field, they correspond to line 280 and 281 in system M, and line 330 and 331 in system B.)

Usually the following test signals are used:

  • Luminance bar (low frequency tilt)
  • 2T signal (Overshoot)
  • 20T signal (differential gain and phase)
  • Staircase (luminance linearity)
  • Group of sine waves with different frequencies (video characteristics)
  • Color carrier superimposed on staircase (differential gain and phase)
  • Group of color carriers with different amplitudes (intermodulation of luminance and color)

See also

References and notes

  1. ^ Weighting is a crude measurement. Complete aligning of the transmitter needs professional measuring equipment.
  2. ^ Bernard Grob-Charles E. Herndon: Basic Television and Video systems, Glencoe-McGraw Hill, 1999, p 216.
  3. ^ For example, communication between the studio and transmitter station.

This page was last edited on 27 July 2022, at 00:47
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.