| Type 30 bayonet | |
|---|---|
 Japanese Type 30 Bayonet | |
| Type | Bayonet |
| Place of origin | Imperial Japan |
| Service history | |
| Used by | Japan, China, Korea, North Vietnam, Indonesia, United Kingdom, Russian Empire, Estonia, Finland, Austria-Hungary |
| Wars | Russo-Japanese War World War I Finnish Civil War Second Sino-Japanese War World War II Chinese Civil War Indonesian National Revolution First Indochina war Korean War Vietnam war |
| Production history | |
| Designed | 1897 |
| Unit cost | 9.15 yen ($2.5 USD) in August 1939[1][2] |
| Produced | 1897–1945 |
| No. built | ~8,400,000 |
| Specifications | |
| Mass | 700 g (25 oz) |
| Length | 514 mm (20.2 in) |
| Blade length | 400 mm (16 in) |
The Type 30 bayonet (三十年式銃剣, sanjūnen-shiki jūken) was a bayonet designed for the Imperial Japanese Army to be used with the Arisaka Type 30 Rifle, which was later used on the Type 38 and Type 99 rifles, the Type 96 and Type 99 light machine guns, and the Type 100 submachine gun. Some 8.4 million were produced, and it remained in front-line use from the Russo-Japanese War to the end of World War II. All Japanese infantrymen were issued with the Type 30, whether they were armed with a rifle or pistol, or even if they were unarmed. Because of its reliability, it was a valuable tool and weapon for Japanese infantrymen.[3]
YouTube Encyclopedic
-
1/3Views:14 7231 81713 790
-
Japan's Universal Arisaka Bayonet: The Type 30
-
WWII Japanese Bayonets! The Type 30 Bayonet for the Arisaka Rifle
-
Type 30 Japanese Bayonet
Transcription
Description
The Type 30 Bayonet was a single-edged sword bayonet with a 400 mm (16 in) blade and an overall length of 514 mm (20.2 in) with a weight of approximately 700 g (25 oz). The Type 30 bayonet is also known as the "Pattern 1897 bayonet". Early Type 30 bayonets usually sported a J-shaped hooked quillon guard designed to catch and trap the enemy's blade.[4] By 1942, the quillon was eliminated to save materials and decrease production time, leaving only a straight guard.[4] Type 30 scabbards went from metal (pre–1942), to vulcanized fiber (1942–1943), and finally to wood or bamboo (1944–1945).[4] Scabbards were usually painted black and called a burdock sword (gobo ken) as it looked like burdock, a vegetable.
The design was intended to give the average Japanese infantryman a long enough reach to pierce the abdomen of a cavalryman. However, the structure had a number of drawbacks, some caused by the poor quality of forgings used, which tended to rust quickly, not hold an edge, and break when bent.[citation needed]
The weapon was manufactured from 1897 to 1945 at a number of locations, including the Kokura Arsenal, Koishikawa Arsenal (Tokyo), and Nagoya Arsenal, as well as under contract by private manufacturers including Matsushita, and Toyoda Automatic Loom.
References
- ^ "兵器臨時定価、予価、表送付の件 Military catalogue of the Japanese military". National Archives of Japan. Ministry of the Army.
- ^ "Banking and Monetary Statistics, 1914-1941, Part I". Federal Reserve Bank of St. Louis. Board of Governors of the Federal Reserve System (U.S.). January 1943 [1943].
- ^ Rottman, Gordon L. (2005). Japanese Army in World War II - Conquest of the Pacific 1941-42. Oxford, England: Osprey Publishing. p. 47. ISBN 1841767891.
- ^ a b c Nila, Gary (2011). Japanese Special Naval Landing Forces: Uniforms and Equipment 1932-45. London, England: Bloomsbury Publishing. ISBN 9781780962399. Retrieved 14 March 2019.
External links
This page was last edited on 13 December 2023, at 22:00