The topsides on a boat, ship, watercraft, or floating production storage and offloading (FPSO) vessel, is that part of the hull between the waterline and the deck.[1] It includes the visible parts of the bow, stern, sheer, and, if present, tumblehome.
On an offshore oil platform, topsides refers to the upper half of the structure, above the sea level, outside the splash zone, on which equipment is installed. This includes the oil production plant, the accommodation block and the drilling rig. They are often modular in design and so can be changed out if necessary allowing expensive platforms to be more readily updated with newer technology. It contrasts with the jacket structure, which constitutes the lower half of the platform structure (the supporting legs and lattice framework), partly submerged in sea.
YouTube Encyclopedic
-
1/3Views:2 18899 381174 369
-
Topside Drone Keeps Vessels Ship-Shape
-
The BEST WAY TO ROLL & TIP Topside Paint on Your Boat
-
Quantum 99 The Best Topside Paint For The #DIY ?? Part 1/2
Transcription
References
- ^ Rognaas, G., Xu, J., Lindseth, S., & Rosendahl, F. (2001). Mobile offshore base concepts. Concrete hull and steel topsides. Marine Structures, 14(1-2), 5-23.
This page was last edited on 9 January 2022, at 20:31