To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Token bus network

From Wikipedia, the free encyclopedia

Token passing in a Token bus network
Token passing in a Token bus network

Token bus is a network implementing a Token Ring protocol over a virtual ring on a coaxial cable.[1] A token is passed around the network nodes and only the node possessing the token may transmit. If a node doesn't have anything to send, the token is passed on to the next node on the virtual ring. Each node must know the address of its neighbour in the ring, so a special protocol is needed to notify the other nodes of connections to, and disconnections from, the ring.[2]

Due to difficulties handling device failures and adding new stations to a network,[vague] Token Ring gained a reputation[who?] for being unreliable and difficult to upgrade. Bus networks, such as Ethernet, had a more flexible and reliable physical architecture,[vague][who?] but Ethernet's access protocol could not absolutely guarantee a maximum time any station would have to wait to access the network, so was thought[who?] to be unsuitable for manufacturing automation applications. The Token bus protocol was created to combine the benefits of a physical bus network with the deterministic access protocol of a Token Ring network.[3][dubious ]

Token bus was standardized by IEEE standard 802.4. It was mainly used for industrial applications. Token bus was used by General Motors for their Manufacturing Automation Protocol (MAP) standardization effort.[4] This is an application of the concepts used in Token Ring networks. The main difference is that the endpoints of the bus do not meet to form a physical ring.

In order to guarantee the packet delay and transmission in Token bus protocol, a modified Token bus was proposed in Manufacturing Automation Systems and flexible manufacturing system (FMS).

A means for carrying Internet Protocol over IEEE 802 networks, including token bus networks, was developed.[5]

The IEEE 802.4 Working Group has disbanded and the standard has been withdrawn by the IEEE.[6]

YouTube Encyclopedic

  • 1/3
    Views:
    15 223
    6 911
    68 745
  • Controlled Access Protocols - Token Passing
  • Token Ring ( in Hindi) (हिन्दी में)
  • Profibus │ What is Profibus │ How does Profibus work │Profibus dp │

Transcription

See also

References

  1. ^ "Token Bus Network". Retrieved 2012-03-21.
  2. ^ "Token Bus (IEEE 802.4)". Retrieved 2012-03-21.
  3. ^ "Token Bus and Token Ring". Retrieved 2012-03-21.
  4. ^ Weaver, A.C.; Summers, C.F. (February 1988). "The IEEE token bus-A performance bound on GM MAP". Industrial Electronics, IEEE Transactions on. 35: 13–17. doi:10.1109/41.3057.
  5. ^ RFC 1042
  6. ^ "IEEE 802 Working Group & Executive Committee Study Group Home Pages". IEEE 802 LAN/MAN Standards Committee. Retrieved 2012-03-21.
This page was last edited on 23 February 2021, at 14:11
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.