| |
| Names | |
|---|---|
| IUPAC name
Tin(2+) bis(2-ethylhexanoate)
| |
| Identifiers | |
3D model (JSmol)
|
|
| ChemSpider | |
| ECHA InfoCard | 100.005.554 |
PubChem CID
|
|
| UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
| Properties | |
| C16H30O4Sn | |
| Molar mass | 405.122 g·mol−1 |
| Appearance | Yellow liquid |
| Density | 1.251 g/cm3 |
| Melting point | < 0 °C (32 °F; 273 K) |
| Boiling point | ~ 130 to 150 °C (266 to 302 °F; 403 to 423 K) at 30 mTorr |
| Degrades in water to form Sn(IV) | |
| Hazards | |
| Flash point | 113 °C (235 °F; 386 K) closed cup |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
Tin(II) 2-ethylhexanoate or tin(II) octoate or stannous octoate (Sn(Oct)2)[1] is a compound of tin. Produced by the reaction of tin(II) oxide and 2-ethylhexanoic acid, it is a clear colorless liquid at room temperature, though often appears yellow due to impurities, likely resulting from oxidation of Sn(II) to Sn(IV).[2]
It is sometimes used as a catalyst for ring-opening polymerization, such as for the production of polylactic acid.[3]
YouTube Encyclopedic
-
1/1Views:981
-
How to draw the structure for propyl hexanoate | Drawing Esters | Organic Chemistry
Transcription
References
- ^ Sometimes misleadingly tin(II) octanoate.
- ^ Kumar Suri, Ashok; Banerjee, Srikuman (2006). "Tin". Materials Science and Technology. doi:10.1002/9783527603978.mst0079. ISBN 9783527603978.
- ^ Schwach, G.; Coudane, J.; Engel, R.; Vert, M. (1997). "More about the polymerization of lactides in the presence of stannous octoate". Journal of Polymer Science Part A: Polymer Chemistry. 35 (16): 3431–3440. Bibcode:1997JPoSA..35.3431S. doi:10.1002/(SICI)1099-0518(19971130)35:16<3431::AID-POLA10>3.0.CO;2-G.
This page was last edited on 10 September 2022, at 23:20