Telescoping (rail cars)

In a railway accident, telescoping occurs when the underframe of one vehicle overrides that of another, and smashes through the second vehicle's body. The term is derived from the resulting appearance of the two vehicle bodies: the body of one vehicle may appear to be slid inside the other like the tubes of a collapsible telescope – the body sides, roof and underframe of the latter vehicle being forced apart from each other.^[1]

Telescoping often results in heavy fatalities if the cars telescoped are fully occupied. The car riding on top will often be destroyed by the structure of the car below, crushing those on board (although the physics of the incident may reverse the cars' roles). The chances of telescoping can be reduced by use of anticlimbers and other structural systems which direct crash energy and debris away from the passenger and crew areas.^[2] One such energy absorbing system is the Green Buffer, winners of the 2023 Swedish Steel Prize,^[3] where a collapsing steel structure in the buffers dissipate energy similarly to the crumple zones used in the automotive industry.

Accidents where telescoping occurred are numerous and include:

To reduce the chance of telescoping, rail and tramway vehicles are often provided with an anticlimber: a horizontally ridged plate at the end of the chassis, which in a collision will engage with the anticlimber on the next car.

Gallery

• 
  The aftermath of the June 2009 Washington Metro train collision
• 
  The aftermath of the 1898 St Johns rail accident, where the rear two carriages of a passenger train were telescoped by being hit at 8 mph (13 km/h) by a following train.
• 
  Cars involved in the Mud Run disaster, October 10, 1888

See also

• Anticlimber
• Buff strength
• Crashworthiness
• EN 15227 anti-climbing

References

This page was last edited on 29 January 2024, at 19:48