To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.

From Wikipedia, the free encyclopedia

Tatra T11
Also calledTatra 11
DesignerHans Ledwinka
Body and chassis
LayoutFR layout
Engine1,056 cc (1.1 L) Tatra 11 F2
Transmission4-speed manual
Wheelbase2,635 mm (103.7 in)
Kerb weight680–900 kg (1,499–1,984 lb)
SuccessorTatra 12

The Tatra T11[1] is an automobile that was produced from 1923 through 1927. It was the first Tatra model to use the unique combination of major components that are still in use on the trucks produced by Tatra to this day.[clarification needed] It was the first car to use a backbone chassis.


Hans Ledwinka created the design of the T11 while working for Steyr in Austria. He believed there was a need for a small car, and carried out the work in his own time. His design offered to the Steyr management was rejected. He left the company soon after to work for a previous employer, Nesseldorfer, in Moravia, which was soon to become Tatra. This was in 1921 and the development of the T11 started soon after. The T11 was produced between 1923 and 1927 with 3,847 examples made. It was then replaced by the T12, a development of the T11 design, with 7,222 being produced by 1936 when it was discontinued.


The Tatra T11 had its engine and gearbox in unit, bolted to the front of a tubular backbone with an integral propeller shaft that also served as the chassis. Bolted to the rear of the backbone is a final drive unit that, using an assembly of gears, not only changes the direction and speed of the drive, but facilitates the movement of swing axles without the need for flexible drive joints.

The T11's engine was an air-cooled horizontally opposed twin cylinder engine with overhead valves. It had a capacity of 1,057 cc (64.5 cu in) and was located above the front beam axle which was attached to it by a transverse elliptical leaf spring.


From 1931 the T12 was joined by the T57 with a 1155 cc air-cooled flat four engine, and the T54 with a 1465 cc engine of the same configuration; both models were based on the original T11 format. Only 486 T54 models were produced by 1936 when production stopped.

The T57 was developed in T57A, T57B, and T57K versions, remaining in production until 1948, by which time over 27,000 had been produced, the later models having a 1256 cc engine.


  1. ^ "Tatra 11". Retrieved 24 June 2010.
This page was last edited on 28 February 2020, at 16:00
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.