To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Static load testing

From Wikipedia, the free encyclopedia

Kentledge load testing in Haikou, Hainan, China

Static load testing is an in situ type of load testing used in geotechnical investigation to determine the bearing capacity of deep foundations prior to the construction of a building. It differs from the statnamic load test and dynamic load testing in that the pressure applied to the pile is slower.[1][2] Static load testings are performed in order to measure a design's axial tension or axial compression. It can also be used to measure its deflected shape under lateral load.[3]

YouTube Encyclopedic

  • 1/5
    Views:
    64 241
    42 183
    611
    46 403
    8 778
  • Vertical Pile load test by Static Method
  • Types of Pile Testing
  • Initial/Routine Vertical Static Load Test
  • Pile Initial Static Load Test Methodology Live Step by Step Procedure Rock Anchor Method
  • Pile Foundation का Load Test कैसे करते है| Static pile load test procedure Step by step| Pile Test

Transcription

Kentledge load testing method

Kentledge refers to iron weights used as permanent ship ballast, or iron or concrete weights used in load testing. This method involves the construction of a platform upon which massive weights are placed. These weights bear down on the pile putting it under load. Gauges measure resistance, movement of the pile, and other readings to determine the properties of the ground.

Bi-directional pile load testing method

Bi-directional Static Load Test is a steadfast Maintained Load Test option for both large and small diameter piles that is widely used in the market. The main difference between a top-loaded maintained load test and a Bi-Directional is the location of the jack. One of the types of bi-directional method is YJACK method.[4]

BD mechanism

A sacrificial and embedded hydraulic jack is cast within the pile body. Upon application of load, the pile is separated into two sections and load is applied to both sections simultaneously and reacting against each other in two directions; upward against upper skin friction and downward against base end bearing and lower skin friction. Practically, the bi-directional pile load test does not require reaction beams, anchor piles or Kentledge during load applying. However, technically bi-directional is equivalent to static load test method. In other words, bi-directional simulates the static load test results.

Practically, the bi-directional pile load test does not require reaction beams, anchor piles or Kentledge during load applying. However, technically bi-directional is equivalent to static load test method. In other words, bi-directional simulates the static load test results.

With the analogy, if the static load test reaction system (either Kentledge or anchor piles) covered by soil and apply loading, the system becomes bi-directional. The hydraulic jack in static load test becomes bi-directional jack. The load applying on bi-directional is exactly same as static load test method with designated loading steps.[5]

One of the bi-directional testing using YJACK method at Kuala Lumpur, Malaysia.

References

  1. ^ Handbook on Pile Load Testing, Federation of Piling Specialists, February 2006
  2. ^ Static Pile Load Testing Manual, GCP-18, State of New York: Department of Transportation: Geotechnical Engineering Bureau, August 2015
  3. ^ "Pile Movement Analysis with Static Load Testing". GRL. Retrieved 2020-04-10.
  4. ^ State of the Art Technology of YJACK in Bidirectional Pile Test, Proceedings of International Conference Pile 2013, June 2–4, 2013
  5. ^ "ASTM D8169/D8169M − 18 -  Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load1" (PDF). American Society for Testing and Materials.

External links

This page was last edited on 4 March 2024, at 20:41
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.