Sonning Cutting

Sonning Cutting is on the original Great Western Railway built by Isambard Kingdom Brunel.^[1] It is to the east of Reading station and to the west of Twyford station near the village of Sonning in Berkshire, England. The railway's originally planned route had been around the north of Sonning Hill past the village. But because of local objections the railway bypassed the village in a cutting, over 1-mile (1.6 km) and up to 60 feet (18 m) deep, through the hill, giving a more direct route between Twyford and Reading.^[2]

The cutting was hand-dug with no machinery and the spoil removed in wheelbarrows and horse-drawn carts. It took two years to complete and several people were killed in the process. The line was opened on 30 March 1840.

After the ending of the broad gauge in 1892 the railway was widened to four tracks. This involved a major rebuilding of the cutting, during which the slope of the sides was reduced.

Accident

Early on 24 December 1841, a mixed goods and passenger train ran into a landslide in the cutting, caused by earlier persistent heavy rain.^[3] Many passengers who were carried in open-topped wagons were thrown out or crushed between the wagons. Eight people died there and seventeen, one of whom died later, were injured. Among the casualties were artisans returning home after working on the new Parliament building. The tragedy stimulated William Ewart Gladstone, while President of the Board of Trade (1843–1845), to introduce legislation to improve safety on the railways.^{[citation needed]}

See also

• Pre-1900 rail accidents in the UK
• List of British rail accidents by death toll, fewer than 10 killed

References

Wikimedia Commons has media related to Sonning Cutting.

51°27′42″N 0°54′47″W / 51.46174°N 0.91318°W / 51.46174; -0.91318

This page was last edited on 21 October 2022, at 20:35