Seaboard Milling Company | |
 Seaboard Milling Company, March 2007 | |
   | |
| Location | 202 Hickory Ave., Sanford, North Carolina |
|---|---|
| Coordinates | 35°28′41″N 79°10′22″W / 35.47806°N 79.17278°W |
| Area | 0.4 acres (0.16 ha) |
| Built | 1915-1916 |
| NRHP reference No. | 02000440[1] |
| Added to NRHP | May 2, 2002 |
Seaboard Milling Company, also known as Seaboard Roller Mill and Broadway Roller Mills, is a historic roller mill located at Sanford, Lee County, North Carolina. It was built in 1915–1916, and is a three-story, brick building with a gable roof with stepped end parapets and traces of decorative exterior painting. It has a one-story metal-sided frame wing erected in two phases about 1920, and a one-story cinder-block office wing from the early 1950s.[2]
It was listed on the National Register of Historic Places in 2002.[1]
YouTube Encyclopedic
-
1/2Views:1 8771 298
-
Xtex Polythene Ltd Factory Video Tour
-
Streching a polyethylene strip upon heating
Transcription
References
- ^ a b "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
- ^ J. Daniel Pezzoni (December 2001). "Seaboard Milling Company" (PDF). National Register of Historic Places - Nomination and Inventory. North Carolina State Historic Preservation Office. Retrieved 2015-01-01.
This page was last edited on 10 April 2024, at 06:22