SMPTE 424M is a standard published by SMPTE which expands upon SMPTE 259M, SMPTE 344M, and SMPTE 292M allowing for bit-rates of 2.970 Gbit/s and 2.970/1.001 Gbit/s over a single-link coaxial cable. These bit-rates are sufficient for 1080p video at 50 or 60 frames per second.[1] The initial 424M standard was published in 2006, with a revision published in 2012 (SMPTE ST 424:2012).[2] This standard is part of a family of standards that define a serial digital interface (SDI); it is commonly known as 3G-SDI.
YouTube Encyclopedic
-
1/2Views:5 248930
-
Moving images: Digitizing to the Future
-
Телевизионные камеры: виды, элементы, органы управления и возможности
Transcription
Formats
Within this standard, there are three formats:
- Level A format is the direct mapping of uncompressed 1080p (up to 60 fps) video into a serial digital interface at the nominal 3 Gbit/s. That is, one video signal, one video stream, in one cable.
- Level B-DL format is the mapping of dual-link HD-SDI/SMPTE 372M (i.e.: 1080p up to 60 fps) in a single serial digital interface at the nominal 3 Gbit/s. That is, one video signal, two streams, in one cable.
- Level B-DS format is the dual-stream carriage of two independent HD-SDI/SMPTE 292M signals (720p up to 60 fps or 1080i/1080p up to 30 fps) in a single serial digital interface at the nominal 3 Gbit/s. That is, two video signals, two video streams, in one cable.[3]
References
- ^ SMPTE 292M
- ^ "ST 424:2012 3 Gb/s Signal/Data Serial Interface". SMPTE. Retrieved 1 June 2015.
- ^ "Advice on the use of 3 Gbit/s HD-SDI interfaces" (PDF). European Broadcasting Union (EBU) Technology & Innovation Department. Geneva. July 2011. pp. 7, 17–20, 23–24, 27. Retrieved 26 April 2014.
 | This article about television technology is a stub. You can help Wikipedia by expanding it. |
This page was last edited on 24 March 2024, at 21:30