SIG MG 710-3

MG 710-3
A SIG MG 710-3 from the Swedish Army Museum.
Type	General-purpose machine gun
Place of origin	Switzerland
Service history
Used by	See Users
Production history
Designer	SIG
Designed	1955–1960s
Manufacturer	SIG
Specifications
Mass	9.25 kg (20.39 lb)
Length	1,143 mm (45.0 in)
Barrel length	559 mm (22.0 in)

Cartridge	7.62×51mm NATO
Action	Roller-delayed blowback
Rate of fire	800–950 rounds/min
Muzzle velocity	790 m/s (2,592 ft/s)
Effective firing range	100 to 1200 m sight adjustments
Feed system	Non-disintegrating DM1 or disintegrating M13 linked belt
Sights	Open type sights with rear sliding tangent

The SIG MG 710-3 is a Swiss 7.62 mm general-purpose machine gun (GPMG) designed and manufactured by SIG - Schweizerische Industrie Gesellschaft (currently Swiss Arms AG). The weapon was developed as a commercial venture primarily for export, since the Swiss Army had already adopted the 7.5 mm MG 51 GPMG (chambered for the 7.5×55mm Swiss Schmidt–Rubin rifle cartridge), produced by the federal arms factory W+F.

YouTube Encyclopedic

1/2
Views:
21 702
17 611

Transcription

Development

Work on the SIG MG 710-3 machine gun (initially designated the Model 55, changed in 1957 to SIG MG 710) began in 1955 and its design was influenced by the MG 45, a late World War II development of the German MG 42 machine gun. These efforts resulted in the SIG MG 710-1 (adapted to use the 6.5×55mm round) and the SIG MG 710-2 (with the 7.92×57mm Mauser cartridge), while the prototype for the final production version which would become the SIG MG 710-3 (chambered in a standard NATO 7.62×51mm caliber) was completed by the mid-1960s. Currently the weapon is in use by the armed forces of Bolivia, Brunei, Chile and Liberia,^[1]

Design details

The SIG MG 710-3 is an automatic, air-cooled belt-fed weapon operated by roller-delayed blowback and fires from an open bolt. The machine gun's bolt differs from other contemporary designs employing the roller-delayed blowback method of operation (such as CETME and Heckler & Koch designed weapons), being a 3-piece design that consists of a bolt head with two locking rollers, a striker sleeve and the bolt carrier which is connected telescopically with the bolt head. When a round is chambered pressure from the return spring drives the bolt and carrier assembly forward; simultaneously both rollers engage camming surfaces which drive the rollers outward from their compressed travel position into recesses in the barrel extension. Upon firing, the bolt carrier and striker assembly recoil to the rear and the geometry of the fixed camming surfaces drives the rollers inward unlocking the bolt breech and increasing the speed at which the striker sleeve withdraws relative to the bolt. As the slower bolt continues rearward it impacts the returning striker sleeve (this impact decelerates the bolt).

The bolt assembly also contains the spring extractor, while a lever case ejector is located at the base of the feed tray. Spent casings are ejected downward. The weapon has a striker firing mechanism, a trigger assembly for fully automatic only fire and a cross-bolt safety (the "safe" setting disables the bolt catch).

The SIG MG 710-3 is fed from the left side by either NATO standard disintegrating M13 (United States) or continuous link German DM1 belt, but only after swapping several parts in the feed block. When used in a light machine gun role, the ammunition belt is stored in a sheet metal container that has a 50-round capacity and is attached to the left side of the receiver. The feeding mechanism resembles the one used in the MAG machine gun (a simplified version of the MG 42's feed system) operated with a feed arm driven by the motion of the striker sleeve. The belt is fed in two stages during both the forward and rear movement of the bolt assembly.

The quick-change barrel, ended with a slotted flash suppressor, has a fixed handle used to remove it. The machine gun uses three types of barrels: a light profile, heavy profile (in a heavy machine gun role), and special type (used for firing blank ammunition).

The firearm has a fixed stock (metal or wood), detachable bipod and open-type sights (rear sight is a sliding tangent with settings from 100 to 1200 m with 100 m increments). Used as a static heavy machine gun the weapon is placed on a SIG L810 tripod. It is also adapted to use an optical sight (with 2.5× magnification) or a night vision device.

Users

References

^ ^a ^b ^c ^d ^e Jones, Richard D.; Ness, Leland S., eds. (January 27, 2009). Jane's Infantry Weapons 2009/2010 (35th ed.). Coulsdon: Jane's Information Group. ISBN 978-0-7106-2869-5.
^ Ezell, Edward (1988). Small Arms Today. Vol. 2nd. Stackpole Books. p. 47. ISBN 0811722805.

External links

General-purpose machine gun (GPMG)

v t e Delayed blowback firearms
Lever delayed	AA-52 Benelli B76 Cristóbal Carbine Danuvia 43M Dlugov FAMAS FN Five-seven FNAB-43 Garanin MAC-58 Sterling 7.62 ST Kinetics CPW TKB-517 AVB-7.62
Roller delayed	Calico M960 CEAM Modèle 1950 CETME Ameli CETME rifle CETME Model L Gerät 03 prototype HK G3 HK G41 HK MP5 HK P9 HK PSG1 HK MSG90 HK SR9 HK UCP HK21 HK33 HK43 HK SL6 HK SL7 MG 45 PTR 91F SIG 510 SIG MG 710 SRM Arms Model 1216 StG 45(M)
Gas delayed	Arsenal P-M02 Grossfuss Sturmgewehr Heckler & Koch P7 M-77B Steyr GB Volkssturmgewehr 1-5 Walther CCP
Hesitation locked	M50 Reising Remington Model 51 Remington Model 53 Remington R51 SIG MKMO
Flywheel delayed	Barnitzke machine gun MGD PM-9
Radial delayed	CMMG Mk 45 Guard
Toggle delayed	Schwarzlose machine gun T1E3 Model 32 semi-automatic rifle
Vector delayed	Jatimatic KRISS Vector