To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Rolls-Royce Eagle (1944)

From Wikipedia, the free encyclopedia

Eagle
Rolls-Royce Eagle 22 at the Fleet Air Arm Museum.
Type Liquid-cooled H-24 piston engine
Manufacturer Rolls-Royce Limited
First run March 1944
Major applications Westland Wyvern
Number built 15 (Eagle 22)

The Rolls-Royce Eagle Mk XXII [1] is a British 24-cylinder, sleeve valve, H-block aero engine of 46 litre (2,807 cubic inches) displacement. It was designed and built in the early-1940s by Rolls-Royce Limited and first ran in 1944. It was liquid-cooled, of flat H configuration with two crankshafts and was capable of 3,200 horsepower (2,387 kW) at 18 psi boost.

YouTube Encyclopedic

  • 1/5
    Views:
    252 262
    729 103
    193 701
    28 353
    2 035
  • War Factories | Season 3, Episode 1: Rolls Royce - The Engine That Won the War | FD History
  • Rolls Royce Crecy - The Most Advanced Piston Aero Engine Never Made.
  • Rolls Royce Merlin - The Story Behind the Engine that Won the War
  • Army Air Forces Alerts: Merlin P-40Fs, .50 Caliber MG Jams & Turbo Superchargers (1942-Restored)
  • Vintage Rolls Royce On Show (1969)

Transcription

Design and development

The Rolls-Royce design team realised that producing a scaled-up version of their Griffon V-12 engine would lead to excessively large combustion chambers and problems with detonation.[2] The team concluded that a larger number of small cylinders would be the answer and considered an X-24 design. This layout had previously caused unreliability with the Rolls-Royce Vulture due to the need to fasten four connecting rods in a complicated arrangement to a common big end bearing.[2]

The designers finally settled on an 'H' layout with two crankshafts and 'blade and fork' connecting rod attachments, the crankshafts being connected through the propeller speed reduction unit. The new engine followed the layout of the Napier Sabre and similarly used sleeve valves but with a simplified drive system.[2]

A two-speed, two-stage supercharger and intercooler were used to compress then cool the air-fuel mixture, following Griffon and Merlin practice. Starting was by Coffman starter. An auxiliary shaft driven by the lower crankshaft operated the main coolant pump, intercooler coolant pump, pressure and scavenge oil pumps and a fuel injection pump. Piston ring failures and cylinder head sealing problems were experienced during early flight testing.[2]

Applications

The Eagle was never fitted to a production front-line fighter, as it was overshadowed by a new wave of turbojet engines, such as the Rolls-Royce Derwent and turboprops such as the Dart and Armstrong Siddeley Python. Fifteen Eagle 22s were produced to power prototypes of the Westland Wyvern fighter/torpedo bomber because of delay in the development of the Python.[2]

Supermarine specified the Eagle in their 1944 proposal for a single-engined Naval fighter, the Type 391, but the proposal was not followed up.[3]

Variants

46H Eagle I

(1944) - Compression ratio 6.5:1.

46H Eagle II

(1944) - Modified Eagle I.

46H Eagle (20 srs) 22

(1946-1949) - Increased compression ratio (7:1), 3,500 hp at 3,500 rpm and 28 lb boost.[4] Fifteen engines produced at the Derby Rolls-Royce factory. First flown in a Westland Wyvern on 16 December 1946.

Engines on display

Specifications (Eagle 22)

Data from Lumsden.[6]

General characteristics

  • Type: 24-cylinder liquid-cooled H-type aircraft piston engine
  • Bore: 5.4 in (137 mm)
  • Stroke: 5.125 in (130 mm)
  • Displacement: 2,807 in3 (46 L)
  • Length: 135.5 in (3442 mm)
  • Width: 43.4 in (1,102 mm)
  • Height: 50.0 in (1,270 mm)
  • Dry weight: 3,900 lb (1,769 kg)

Components

Performance

See also

Related development

Comparable engines

Related lists

References

Notes

  1. ^ "Archived copy". Archived from the original on 10 November 2017. Retrieved 10 November 2017.{{cite web}}: CS1 maint: archived copy as title (link)
  2. ^ a b c d e Rubbra 1990, p. 91.
  3. ^ Pegram, Ralph. Supermarine Secret Projects, Vol 2: Fighters and Bombers. Mortons 2022. pp.89-90.
  4. ^ Gunston 2006, p. 191.
  5. ^ Fleet Air Arm Museum - Westland Wyvern TF1 www.fleetairarm.com Retrieved: 25 March 2010.
  6. ^ Lumsden 2003, p. 221.

Bibliography

  • Gunston, Bill. World Encyclopedia of Aero Engines (5th Edition). Phoenix Mill, Gloucestershire, UK: Sutton Publishing Limited, 2006. ISBN 0-7509-4479-X
  • Lumsden, Alec. British Piston Engines and their Aircraft. Marlborough, Wiltshire: Airlife Publishing, 2003. ISBN 1-85310-294-6.
  • Rubbra, A.A. Rolls-Royce Piston Aero Engines - a designer remembers: Historical Series no 16 :Rolls-Royce Heritage Trust, 1990. ISBN 1-872922-00-7

External links

This page was last edited on 12 April 2024, at 07:16
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.