To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

From Wikipedia, the free encyclopedia

A red-colored post pounder next to two green steel t-posts

A post pounder, post driver, post rammer, post knocker or fence driver is a tool used for driving fence posts and similar items into land surfaces. It consists of a heavy steel pipe which is closed at one end and has handles welded onto the sides. It is normally used by one person, but larger versions may require two.

YouTube Encyclopedic

  • 1/1
    Views:
    148 986
  • NEW 99E-Y Man Saver Post Driver Video

Transcription

History

An early type was developed in 1933 by the Pennsylvania Department of Transportation to aid the installation of fencing along roads and highways. [1]

Operation

The open end is put over the top of the post to be driven, then the tool is lifted and dropped repeatedly onto the top of the post. The closed end strikes the top of the post, driving it into the ground. Unlike a maul it can be used easily on tall posts, such as those used for deer fencing. Because the tube guides the striking force consistently in line with the post and strikes it across its full width, a post pounder usually damages the top of the post less than a maul. It is not suitable for posts which will be shorter than the length of the tool, or for posts which do not fit easily into the tube because of bulges or curves, or their over-large diameter. The tool is difficult to use on slanting posts.

The post pounder can also be used to remove t-posts.[2] To do so, put the closed end of the post pounder on the ground about 6 inches from the t-post. It should be on the side of the post with the knobs. Push back on the t-post away from the pounder, then push the top of the pounder so the rim sets beneath the lowest knob possible on the t-post. With the pounder lodged beneath the t-post knob, pull the t-post back to the starting position and it will lift up a few inches. Repeat process until t-post can be removed.

Safety and Precautions

Single-person post pounders tend to be around 20 pounds (9 kg), but weight varies with model types. The diameter depends on the size of the post to be pounded. They can be dangerous to handle, especially if the lower edge of the pounder catches on the top of the post, when it can pivot towards the user and strike them on the head.

Hearing protection and a hard hat are often recommended.

See also

References

  1. ^ "Miniature Pile Driver Sinks Fence Posts", October 1933, Popular Mechanics bottom of page 26, left side of page
  2. ^ Flat Funnel (2018-06-18), How to REMOVE a T-post using a T-post hammer, archived from the original on 2021-12-22, retrieved 2018-06-28
This page was last edited on 17 March 2023, at 20:58
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.