To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

How to transfigure the Wikipedia

Would you like Wikipedia to always look as professional and up-to-date? We have created a browser extension. It will enhance any encyclopedic page you visit with the magic of the WIKI 2 technology.

Try it — you can delete it anytime.

Install in 5 seconds
4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
Great Wikipedia has got greater.
.
Leo
Newton
Brights
Milds

Profibus

From Wikipedia, the free encyclopedia

Profibus
Protocol Information
Type of NetworkDevice Bus, Process Control
Physical MediaTwisted pair, fiber
Network TopologyBus
Device AddressingDIP switch or hardware/software
Governing BodyPROFIBUS&PROFINET International (PI)
Websitewww.profibus.com
Profibus electrical connector

Profibus (usually styled as PROFIBUS, as a portmanteau for Process Field Bus) is a standard for fieldbus communication in automation technology and was first promoted in 1989 by BMBF (German department of education and research) and then used by Siemens.[1] It should not be confused with the Profinet standard for Industrial Ethernet. Profibus is openly published as type 3 of IEC 61158/61784-1.[2]

YouTube Encyclopedic

  • 1/5
    Views:
    552 990
    45 648
    12 669
    2 079
    2 996
  • What is Profibus-DP in layman's terms?
  • What is Profibus and how Profibus works ?
  • What is Profibus? How Profibus Communication Works?
  • Reading the Profibus DP Diagnostic
  • Profibus:Refine the Process (part 1 of 2)

Transcription

Origin

The history of PROFIBUS goes back to a publicly promoted plan for an association which started in Germany in 1986 and for which 18 companies and institutes devised a master project plan called "fieldbus".[3] The goal was to implement and spread the use of a bit-serial field bus based on the basic requirements of the field device interfaces. For this purpose, member companies agreed to support a common technical concept for production (i.e. discrete or factory automation) and process automation. First, the complex communication protocol Profibus FMS (Field bus Message Specification), which was tailored for demanding communication tasks, was specified. Subsequently, in 1993, the specification for the simpler and thus considerably faster protocol PROFIBUS DP (Decentralised Peripherals) was completed. Profibus FMS is used for (non-deterministic) communication of data between Profibus Masters. Profibus DP is a protocol made for (deterministic) communication between Profibus masters and their remote I/O slaves.[4][5]

There are two variations of PROFIBUS in use today; the most commonly used PROFIBUS DP, and the lesser used, application specific, PROFIBUS PA:

  • PROFIBUS DP (Decentralised Peripherals)[6] is used to operate sensors and actuators via a centralised controller in production (factory) automation applications. The many standard diagnostic options, in particular, are focused on here.[7]
  • PROFIBUS PA (Process Automation) [8] is used to monitor measuring equipment via a process control system in process automation applications. This variant is designed for use in explosion/hazardous areas (Ex-zone 0 and 1). The Physical Layer (i.e. the cable) conforms to IEC 61158-2,[9] which allows power to be delivered over the bus to field instruments, while limiting current flows so that explosive conditions are not created, even if a malfunction occurs. The number of devices attached to a PA segment is limited by this feature. PA has a data transmission rate of 31.25 kbit/s. However, PA uses the same protocol as DP, and can be linked to a DP network using a coupler device. The much faster DP acts as a backbone network for transmitting process signals to the controller. This means that DP and PA can work tightly together, especially in hybrid applications where process and factory automation networks operate side by side.

In excess of 30 million PROFIBUS nodes were installed by the end of 2009. 5 million of these are in the process industries.[3]

Technology

PROFIBUS Protocol (OSI reference model)
OSI-Layer PROFIBUS
7 Application DPV0 DPV1 DPV2 Management
6 Presentation --
5 Session
4 Transport
3 Network
2 Data Link FDL
1 Physical EIA-485 Optical MBP

Application layer (OSI-Layer 7)

To use these functions, various service levels[10] of the DP protocol[11] were defined:[12][13]

  • DP-V0 for cyclic exchange of data and diagnosis
  • DP-V1 for acyclic data exchange and alarm handling[14]
  • DP-V2 for isochronous mode and data exchange broadcast (slave-to-slave communication)

Data link layer (OSI-Layer 2)

The data link layer FDL (Field bus Data Link) services[15]and protocols[16] work with a hybrid access method that combines token passing with a master/slave method. In a PROFIBUS DP network, the controllers or process control systems are the masters and the sensors and actuators are the slaves.[12][17]

Each byte has even parity and is transferred asynchronously with a start and stop bit. There may not be a pause between a stop bit and the following start bit when the bytes of a telegram are transmitted. The master signals the start of a new telegram with a SYN pause of at least 33 bits (logical "1" = bus idle).

Various telegram types are used. They can be differentiated by their start delimiter (SD):

No data

SD1 = 0x10

SD1 DA SA FC FCS ED

Variable length data

SD2 = 0x68

SD2 LE LEr SD2 DA SA FC DSAP SSAP PDU FCS ED

Fixed length data

SD3 = 0xA2

SD3 DA SA FC PDU FCS ED

Token

SD4 = 0xDC

SD4 DA SA

Fields

SD Start Delimiter
LE Length of protocol data unit, (incl. DA, SA, FC, DSAP, SSAP)
LEr Repetition of length of protocol data unit, (Hamming distance = 4)
FC Function Code
DA Destination Address
SA Source Address
DSAP Destination Service Access Point
SSAP Source Service Access Point
PDU Protocol Data Unit (protocol data)
FCS Frame Checking Sequence, calculated by simply adding up the bytes within the specified length. An overflow is ignored here.
ED End Delimiter (= 0x16)

Service Access Points

SAP (Decimal) SERVICE
Default 0 Cyclical Data Exchange (Write_Read_Data)
54 Master-to-Master SAP (M-M Communication)
55 Change Station Address (Set_Slave_Add) – SAP55 is optional and may be disabled if the slave doesn't provide non-volatile storage memory for the station address.
56 Read Inputs (Rd_Inp)
57 Read Outputs (Rd_Outp)
58 Control Commands to a DP Slave (Global_Control)
59 Read Configuration Data (Get_Cfg)
60 Read Diagnostic Data (Slave_Diagnosis)
61 Send Parameterization Data (Set_Prm)
62 Check Configuration Data (Chk_Cfg)

Bit-transmission layer (OSI-Layer 1)

Three different methods are specified for the bit-transmission layer:[9]

  • With electrical transmission[18][19] pursuant to EIA-485, twisted pair cables with impedances of 150 ohms are used in a bus topology.[20] Bit rates from 9.6 kbit/s to 12 Mbit/s can be used. The cable length between two repeaters is limited from 100 to 1200 m, depending on the bit rate used. This transmission method is primarily used with PROFIBUS DP.
  • With optical transmission via fiber optics, star-, bus- and ring-topologies are used. The distance between the repeaters can be up to 15 km. The ring topology can also be executed redundantly.[17]
  • With MBP (Manchester Bus Powered) [19] transmission technology, data and field bus power are fed through the same cable. The power can be reduced in such a way that use in explosion-hazardous environments is possible. The bus topology can be up to 1900 m long and permits branching to field devices (max. 60 m branches). The bit rate here is a fixed 31.25 kbit/s. This technology was specially established for use in process automation for PROFIBUS PA.[17]

For data transfer via sliding contacts for mobile devices or optical or radio data transmission in open spaces, products from various manufacturers can be obtained, however they do not conform to any standard.

PROFIBUS DP[6] uses two core screened cable with a violet sheath,[18] and runs at speeds between 9.6 kbit/s and 12 Mbit/s.[20] A particular speed can be chosen for a network to give enough time for communication with all the devices present in the network. If systems change slowly then lower communication speed is suitable, and if the systems change quickly then effective communication will happen through faster speed. The RS485 balanced transmission used in PROFIBUS DP only allows 31 devices to be connected at once; however, more devices (up to 126) can be connected or the network expanded with the use of hubs or repeaters (4 hubs or repeaters to reach 126).[7] A Hub or a Repeater is also counted as a device.[21]

PROFIBUS PA[8] runs at fixed speed of 31.25 kbit/s via blue sheathed two core screened cable. The communication may be initiated to minimise the risk of explosion or for the systems that intrinsically need safe equipment. The message formats in PROFIBUS PA are identical to PROFIBUS DP.

Note: PROFIBUS DP and PROFIBUS PA should not be confused with PROFINET.

Profiles

Profiles are pre-defined configurations of the functions and features available from PROFIBUS for use in specific devices or applications. They are specified by PI working groups and published by PI. Profiles are important for openness, interoperability and interchangeability, so that the end user can be sure that similar equipments from different vendors perform in a standardised way. User choice also encourages competition that drives vendors towards enhanced performance and lower costs.

There are PROFIBUS profiles for Encoders, Laboratory instruments, Intelligent pumps, Robots and Numerically Controlled machines, for example. Profiles also exist for applications such as using HART and wireless with PROFIBUS, and process automation devices via PROFIBUS PA. Other profiles have been specified for Motion Control (PROFIdrive) and Functional Safety (PROFIsafe).

Organization

The PROFIBUS Nutzerorganisation e.V. (PROFIBUS User Organisation, or PNO) was created in 1989.[3] This group was composed mainly of manufacturers and users from Europe. In 1992, the first regional PROFIBUS organisation was founded (PROFIBUS Schweiz in Switzerland). In the following years, additional Regional PROFIBUS & PROFINET Associations (RPAs) were added.

In 1995, all the RPAs joined together under the international umbrella association Profibus and Profinet International (PI). Today, PROFIBUS is represented by 25 RPAs around the world (including PNO) with over 1400 members, including most if not all major automation vendors and service suppliers, along with many end users.

See also

References

  1. ^ Weigmann, Josef; Kilian, Gerhard (2003). Decentralization with PROFIBUS DP/DPV1: Architecture and Fundamentals, Configuration and Use with SIMATIC S7. Siemens. ISBN 978-3-89578-218-3.
  2. ^ "Industrial communication networks - Profiles Part 1: Fieldbus profiles". International Electrotechnical Commission (IEC). 2019. IEC 61784-1. Retrieved 2020-04-28.
  3. ^ a b c Bender, Klaus; Freitag, Jörg; Lindner, Klaus-Peter (2009). Milestones: PROFIBUS - 20 years of standards for industrial communication. Karlsruhe: PROFIBUS Nutzerorganisation e.V.
  4. ^ "PROFIBUS Technology and Application – System Description". Profibus and Profinet International (PI). 2016. Order no. 4.332. Retrieved 2023-02-09.
  5. ^ Xiu, Ji (2015). PROFIBUS in Practice: System Architecture and Design. CreateSpace Independent Publishing Platform. ISBN 978-1507633045.
  6. ^ a b Mitchell, Ronald (2003). PROFIBUS: A Pocket Guide. ISA. ISBN 978-1556178627.
  7. ^ a b "PROFIBUS Design". Profibus and Profinet International (PI). 2020. Order no. 8.012. Retrieved 2023-02-09.
  8. ^ a b Powel, James; Vandeline, Henry (2012). Catching the Process Fieldbus: An Introduction to Profibus for Process Automation. Momentum Press. ISBN 978-1606503966.
  9. ^ a b "Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition". International Electrotechnical Commission (IEC). 2022. IEC 61158-2. Retrieved 2023-02-09.
  10. ^ "Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements". International Electrotechnical Commission (IEC). 2014. IEC 61158-5-3. Retrieved 2023-02-09.
  11. ^ "Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements". International Electrotechnical Commission (IEC). 2019. IEC 61158-6-3. Retrieved 2023-02-09.
  12. ^ a b Popp, Manfred (2003). "The New Rapid Way to PROFIBUS DP - From DP-V0 to DP-V2". Profibus and Profinet International (PI). Order no. 4.072. Retrieved 2023-02-09.
  13. ^ Xiu, Ji (2019). PROFIBUS in Practice: Standard and Operation. Independently Published. ISBN 978-1793076830.
  14. ^ Xiu, Ji (2013). PROFIBUS in Practice: System Engineering, Trouble-shooting and Maintenance. CreateSpace Independent Publishing Platform. ISBN 978-1493614684.
  15. ^ "Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements". International Electrotechnical Commission (IEC). 2014. IEC 61158-3-3. Retrieved 2023-02-09.
  16. ^ "Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements". International Electrotechnical Commission (IEC). 2019. IEC 61158-4-3. Retrieved 2023-02-09.
  17. ^ a b c Felser, Max (2017). PROFIBUS Manual. epubli GmbH. ISBN 978-3-8442-1435-2.
  18. ^ a b "PROFIBUS Commissioning". Profibus and Profinet International (PI). 2022. Order no. 8.032. Retrieved 2023-02-09.
  19. ^ a b Xiu, Ji (2013). PROFIBUS in Practice: Installing PROFIBUS devices and cables. CreateSpace Independent Publishing Platform. ISBN 978-1481245210.
  20. ^ a b "PROFIBUS Cabling and Assembly". Profibus and Profinet International (PI). 2020. Order no. 8.022. Retrieved 2023-02-09.
  21. ^ "Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3". International Electrotechnical Commission (IEC). 2018. IEC 61784-5-3. Retrieved 2023-02-09.

External links

This page was last edited on 11 March 2024, at 14:11
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.
Contact WIKI 2
Introduction
Terms of Service
Privacy Policy