To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Offshore concrete structure

From Wikipedia, the free encyclopedia

Offshore concrete structures, or concrete offshore structures, are structures built from reinforced concrete for use in the offshore marine environment. They serve the same purpose as their steel counterparts in oil and gas production and storage. The first concrete oil platform was installed in the North Sea in the Ekofisk oil field in 1973 by Phillips Petroleum, and they have become a significant part of the marine construction industry. Since then at least 47 major concrete offshore structures have been built.

Concrete offshore structures are mostly used in the petroleum industry as drilling, extraction or storage units for crude oil or natural gas. These large structures house machinery and equipment used to drill for, or extract, oil and gas.[1] Concrete offshore structures are not limited to applications within the oil and gas industry, several conceptual studies have shown that concrete support structures for offshore wind turbines can be competitive compared to the more common steel structures, especially for greater water depths.

Depending on the circumstances, platforms may be attached to the ocean floor, consist of an artificial island, or be floating. Generally, offshore concrete structures are classified into fixed and floating structures. Fixed structures are mostly built as concrete gravity based structures (CGS, also termed as caisson type), where the loads bear down directly on the uppermost layers as soil pressure. The caisson provides buoyancy during construction and towing and acts also as a foundation structure in the operation phase. Furthermore, the caisson could be used as storage volume for oil or other liquids.[1] Floating units may be held in position by anchored wires or chains in a spread mooring pattern. Because of the low stiffness in those systems, the natural frequency is low and the structure can move with all six degrees of freedom. Floating units serve as production units, storage and offloading units (FSO) or for crude oil or as terminals for liquefied natural gas (LNG). A more recent development is concrete sub-sea structures.[1]

Concrete offshore structures are highly durable, constructed of low-maintenance material, suitable for harsh and/or arctic environment (like ice and seismic regions),[1] can carry heavy topsides, may be designed to provide storage capacity, can be suitable for soft ground and are economical for water depths larger than 150 m. Most gravity-type platforms need no additional fixing because of their large foundation dimensions and extremely high weight.[1]

YouTube Encyclopedic

  • 1/5
    Views:
    511
    2 829
    146 347
    19 923
    818
  • Innovations in Concrete Support Structures for Offshore Wind Turbines
  • 3D-Printed Concrete Structures for Offshore Wind Energy Generation
  • Underwater Concreting || Placing of Concrete || Manufacture of Concrete #18 ||
  • Corrosion Inhibitor Repair Mortar for Reinforced Concrete Structures
  • Pile concrete pouring using Tremie pipe #construction #civilengineering #irfansbe

Transcription

Fixed structures

Since the 1970s, several fixed concrete platform designs have been developed. Most of the designs have in common a base caisson (normally for storage of oil) and shafts penetrating the water surface to carry the topside. In the shafts normally utility systems for offloading, drilling, draw down and ballast are put up.[citation needed]

Concrete offshore platforms of the gravity-base type are almost always constructed in their vertical attitude. This allows the inshore installation of deck girders and equipment and the later transport of the whole structure to the installation site.

The most common concrete designs are:[citation needed]

  • Condeep (with one, two, three or four columns)
  • ANDOC (with four columns)
  • Sea Tank (with two or four columns)
  • C G Doris
  • Arup Concrete Gravity Substructure (CGS)

Condeep Type

Condeep refers to a make of gravity base structure for oil platforms invented by Olav Mo[2] and fabricated by Norwegian Contractors in Norway. Condeep usually consists of a base of concrete oil storage tanks from which one, three or four concrete shafts rise. The original Condeep always rests on the sea floor, and the shafts rise to about 30m above the sea level. The platform deck itself is not a part of the construction. The Condeep Platforms Brent B (1975) and Brent D (1976) were designed for a water depth of 142m in the Brent oilfield operated by Shell. Their main mass is represented by the storage tank (ca. 100m diameter and 56m high, consisting of 19 cylindrical compartments with 20m diameter). Three of the cells are extended into shafts tapering off at the surface and carrying a steel deck. The tanks serve as storage of crude oil in the operation phase. During the installation these tanks have been used as ballast compartment. Among the largest Condeep type platform are the Troll A platform and the Gullfaks C. Troll A was built within four years and deployed in 1995 to produce gas from the Troll oil field which was developed by Norske Shell, since 1996 operated by Statoil.[3] A detailed overview about Condeep platforms is given in a separate article.

Concrete Gravity Base Structures (CGBS) is a further development of the first-generation Condeep drilling/production platforms installed in the North Sea between the late 1970s and mid '90s. The CGBS have no oil storage facilities and the topside installations will be carried out in the field by a float-over mating method. Current[when?] or most recent projects are:[citation needed]

  • Sakhalin-II platforms (Piltun-Astokhskoye B (PA-B) platform and Lunskoye (LUN-A) platform)

C G DORIS Type

The first concrete gravity platform in the North Sea was a C G Doris platform, the Ekofisk Tank, in Norwegian waters. The structure has a shape not unlike a marine sea island and is surrounded by a perforated breakwater wall (Jarlan patent). The original proposal of the French group C G DORIS (Compagnie General pour les Developments Operationelles des Richesses Sous-Marines) for a prestressed post-tensioned concrete "island" structure was adopted on cost and operational grounds. DORIS was general contractor responsible for the structural design: the concrete design was prepared and supervised on behalf of DORIS by Europe-Etudes. Further example for the C G DORIS designs are the Frigg platforms, the Ninian Central Platform and the Schwedeneck platforms.[citation needed] The design typically consists of a large volume caisson based on the sea floor merging into a monolithic structure, which is offering the base for the deck. The single main leg is surrounded by an outer breaker wall perforated with so called Jarlan holes. This wall is intended to break up waves, thus reducing their forces.

McAlpine/Sea Tank

This design is quite similar to the Condeep type.[citation needed]

ANDOC Type

To achieve its goal and extract oil within five years after discovering the Brent reservoir Shell divided up the construction of four offshore platforms. Redpath Dorman Long at Methil in Fife, Scotland getting Brent A, the two concrete Condeeps B and D were to be built in Norway by Norwegian Contractors (NC) of Stavanger, and C (also concrete) was to be built by McAlpine at Ardyne Point on the Clyde (which is known as the ANDOC (Anglo Dutch Offshore Concrete) design). The ANDOC design can be considered as the British construction industry's attempt to compete with Norway in this sector. McAlpine constructed three concrete platforms for the North Sea oil industry at Ardyne Point. The ANDOC type is very similar to the Sea Tank design, but the four concrete legs terminate and steel legs take over to support the deck.

Arup Concrete Gravity Substructure (CGS)

The Arup dry-build Concrete Gravity Substructure (CGS) concept was originally developed by Arup in 1989 for Hamilton Brothers' Ravenspurn North. The Arup CGS are designed to be simple to install, and are fully removable. Simplicity and repetition of concrete structural elements, low reinforcement and pre-stress densities as well as the use of normal density concrete lead to economical construction costs. Typical for the Arup CGS is the inclined installation technique. This technique helps to maximise economy and provide a robust offshore emplacement methodology. Further projects have been the Malampaya project in the Philippines and the Wandoo Full Field Development on the North West Shelf of Western Australia.

Floating structures

Since concrete is quite resistant to corrosion from salt water and keeps maintenance costs low, floating concrete structures have become increasingly attractive to the oil and gas industry in the last two decades. Temporary floating structures such as the Condeep platforms float during construction but are towed out and finally ballasted until they sit on the sea floor. Permanent floating concrete structures have various uses including the discovery of oil and gas deposits, in oil and gas production, as storage and offloading units and in heavy lifting systems.

Common designs for floating concrete structures are the barge or ship design, the platform design (semi-submersible, TLP) as well as the floating terminals e.g. for LNG.

Floating production, storage, and offloading systems (FPSOS) receive crude oil from deep-water wells and store it in their hull tanks until the crude is transferred into tank ships or transport barges. In addition to FPSO’s, there have been a number of ship-shaped Floating Storage and Offloading (FSO) systems (vessels with no production processing equipment) used in these same areas to support oil and gas developments. An FSO is typically used as a storage unit in remote locations far from pipelines or other infrastructures.

Semi-Submersible

Semi-submersible marine structures are typically only movable by towing. Semi-submersible platforms have the principal characteristic of remaining in a substantially stable position, presenting small movements when they experience environmental forces such as the wind, waves and currents. Semi-Submersible platforms have pontoons and columns, typically two parallel spaced apart pontoons with buoyant columns upstanding from those pontoons to support a deck. Some of the semi-submersible vessels only have a single caisson, or column, usually denoted as a buoy while others utilize three or more columns extended upwardly from buoyant pontoons. For activities which require a stable offshore platform, the vessel is then ballasted down so that the pontoons are submerged, and only the buoyant columns pierce the water surface - thus giving the vessel a substantial buoyancy with a small water-plane area. The only concrete semi-submersible in existence[when?] is Troll B.[citation needed]

Tension Leg Platform (TLP)

A Tension Leg Platform is a buoyant platform, which is held in place by a mooring system. TLP mooring is different to conventional chained or wire mooring systems. The platform is held in place with large steel tendons fastened to the sea floor. Those tendons are held in tension by the buoyancy of the hull. Statoil's Heidrun TLP is the only one with a concrete hull, all other TLPs have steel hulls.

Barge/Ship Design

FPSO or FSO systems are typically barge/ship-shaped and store crude oil in tanks located in the hull of the vessel. Their turret structures are designed to anchor the vessel, allow “weathervaning” of the units to accommodate environmental conditions, permit the constant flow of oil and production fluids from vessel to undersea field, all while being a structure capable of quick disconnect in the event of emergency.

The first barge of prestressed concrete has been designed in the early 1970s as an LPG (liquefied petroleum gas) storage barge in the Ardjuna Field (Indonesia). This barge is built of reinforced and prestressed concrete containing cylindrical tanks each having a cross-section perpendicular to its longitudinal axes that comprises a preferably circular curved portion corresponding to the bottom.

Major offshore concrete structures

Following table summarizes the major[according to whom?][clarification needed] existing offshore concrete structures.

No. Year Installed Operator Field/Unit Structure Type Depth Location Design by Construction by Status
1 1973 Phillips Ekofisk Tank - DORIS[clarification needed] 71 m North Sea (N) DORIS AIP[clarification needed]
2 1974 Atlantic Richfield Ardjuna Field LPG Barge 43 m Indonesia Berger/ABAM
3 1975 Mobil Beryl A Condeep 3 shafts 118 m North Sea (UK) NC/Olav Olsen
4 1975 Shell Brent B Condeep 3 shafts 140 m North Sea (UK) NC/Olav Olsen Condeep Group AIP
5 1975 Elf Frigg CDP1 CGS 1 shaft, Jarlan Wall 104 m North Sea (UK) DORIS AIP 2009
6 1976 Shell Brent D Condeep 3 shafts 140 m North Sea (UK) NC/Olav Olsen Condeep Group
7 1976 Elf Frigg TP1 CGS 2 shafts 104 m North Sea (UK) Sea Tank AIP 2009
8 1976 Elf Frigg MCP-01 CGS 1 shaft, Jarlan Wall 94 m North Sea (N) DORIS AIP 2009
9 1977 Shell Dunlin A CGS 4 shafts 153 m North Sea (UK) ANDOC
10 1977 Elf Frigg TCP2 Condeep 3 shafts 104 m North Sea (N) NC/Olav Olsen AIP 2009
11 1977 Mobil Statfjord A Condeep 3 shafts 145 m North Sea (N) NC/Olav Olsen NC
12 1977 Petrobras Ubarana-Pub 3 CGS caisson 15 m Brazil ?
13 1978 Petrobras Ubarana-Pub 2 CGS caisson 15 m Brazil ?
14 1978 Petrobras Ubarana-Pag 2 CGS caisson 15 m Brazil ?
15 1978 TAQA Bratani Cormorant A CGS 4 shafts 149 m North Sea (UK) Sea Tank
16 1978 Chevron Ninian Central CGS 1 shaft, Jarlan Wall 136 m North Sea (UK) DORIS
17 1978 Shell Brent C CGS 4 shafts 141 m North Sea (UK) Sea Tank
18 1981 Mobil Statfjord B Condeep 4 shafts 145 m North Sea (N) NC/olav Olsen NC
19 1981 Amoco Canada Tarsiut Island 4 hollow caissons 16 m Beaufort Sea ? Removed
20 1982 Phillips Maureen ALC Concrete base artic. LC 92 m North Sea (UK) ? Removed
21 1983 Texaco Schwedeneck A* CGS Monotower 25 m North Sea (D) DORIS/IMS Removed
22 1983 Texaco Schwedeneck B* CGS Monotower 16 m North Sea (D) DORIS/IMS Removed
23 1984 Mobil Statfjord C Condeep 4 shafts 145 m North Sea (N) NC/Olac Olsen NC
24 1984 Global Marine Super CIDS CGS caisson, Island 16 m Beaufort Sea ? Removed
25 1986 Statoil Gullfaks A Condeep 4 shafts 135 m North Sea (N) NC/Olav Olsen
26 1987 Statoil Gullfaks B Condeep 3 shafts 141 m North Sea (N) NC/Olav Olsen NC
27 1988 Norsk Hydro] Oseberg A Condeep 4 shafts 109 m North Sea (N) NC/Olav Olsen NC
28 1989 Statoil Gullfaks C Condeep 4 shafts 216 m North Sea (N) NC/olav Olsen NC
29 1989 Hamilton Bros N. Ravenspurn CGS 3 shafts 42 m North Sea (UK) Arup
30 1989 Phillips Ekofisk P.B CGS Protection Ring 75 m North Sea (N) DORIS AIP
31 1996 Elf Congo N'Kossa Concrete Barge 170 m Congo BOS/Bouygues
32 1993 Shell NAM F3-FB CGS 3 shafts 43 m North Sea (NL) Hollandske Bet.
33 1992 Saga Snorre Concrete Foundation Templates (CFT) 3 cells suction anchores 310 m North Sea (N) NC/Olav Olsen NC
34 1993 Statoil Sleipner A Condeep 4 shafts 82 m North Sea (N) NC/Olav Olsen NC
35 1993 Shell Draugen Condeep Monotower 251 m North Sea (N) NC/Olav Olsen NC
36 1994 Conoco Heidrun Concrete TLP 350 m North Sea (N) NC/Olav Olsen NC
37 1996 BP Harding CGS 109 m North Sea (UK) Taylor Wood Eng.
38 1995 Shell Troll A Condeep 4 shafts 303 m North Sea (N) NC/Olav Olsen NC
39 1995 Conoco Heidrun TLP Concrete TLP 350 m North Sea (N) NC/Olav Olsen NC
40 1995 Norsk Hydro Troll B Semisub 325 m North Sea (N) DORIS KCC
41 1996 Esso West Tuna CGS 3 shafts 61 m Australia Kinhill/DORIS
42 1996 Esso Bream B CGS 1 shaft 61 m Australia Kinhill/DORIS
43 1996 Ampolex Wandoo CGS 4 shafts 54 m Australia Arup
44 1997 Mobil Hibernia CGS 4 shafts 80 m Canada DORIS
45 1999 Amerada Hess South Arne CGS 1 shaft 60 m North Sea (DK) Taylor Woodrow
46 2000 Shell Malampaya CGS 4 shafts 43 m Philippines Arup
47 2005 Sakhalin Energy (SEIC) Lunskoye A CGS 4 shafts 48 m Sakhalin (R) AK/GMAO
48 2005 Sakhalin Energy (SEIC) Sakhalin PA-B CGS 4 shafts 30 m Sakhalin (R) AK/GMAO
49 2008 ExxonMobil Adriatic LNG LNG terminal 29 m Adriatic Sea (I) AK/GMAO
50 2008 MPU Heavy Lifter (Not completed) Heavy Lift Vessel LWA n/a na Olav Olsen Demolished
51 2012 Exxon Neftegas Limited (ENL) Sakhalin-1 Arkutun Dagi (Golden Eagle) GBS 4 shafts 33 m Sakhalin-1 (R) AK/GMAO
52 2017 ExxonMobil Canada Properties Hebron GBS Monotower 109 m Canada KKC/GMAO KKC
53 20?? Husky Energy West White Rose GBS Monotower 118 m Canada Arup

References

  1. ^ a b c d e Gerwick, Ben C. Jr (2007). Construction of Marine and Offshore Structures (third ed.). Taylor and Francis. ISBN 978-0-8493-3052-0.
  2. ^ "Patent number 135909". Norwegian Industrial Property Office.
  3. ^ "Troll Gas fact page". Statoil. Retrieved 2 April 2013.

Printed literature

External links

This page was last edited on 2 June 2023, at 08:53
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.