Skew coordinates

A system of skew coordinates is a curvilinear coordinate system where the coordinate surfaces are not orthogonal,^[1] in contrast to orthogonal coordinates.

Skew coordinates tend to be more complicated to work with compared to orthogonal coordinates since the metric tensor will have nonzero off-diagonal components, preventing many simplifications in formulas for tensor algebra and tensor calculus. The nonzero off-diagonal components of the metric tensor are a direct result of the non-orthogonality of the basis vectors of the coordinates, since by definition:^[2]

${\displaystyle g_{ij}=\mathbf {e} _{i}\cdot \mathbf {e} _{j}}$

where ${\displaystyle g_{ij}}$ is the metric tensor and ${\displaystyle \mathbf {e} _{i}}$ the (covariant) basis vectors.

These coordinate systems can be useful if the geometry of a problem fits well into a skewed system. For example, solving Laplace's equation in a parallelogram will be easiest when done in appropriately skewed coordinates.

Cartesian coordinates with one skewed axis

The simplest 3D case of a skew coordinate system is a Cartesian one where one of the axes (say the x axis) has been bent by some angle ${\displaystyle \phi }$, staying orthogonal to one of the remaining two axes. For this example, the x axis of a Cartesian coordinate has been bent toward the z axis by ${\displaystyle \phi }$, remaining orthogonal to the y axis.

Algebra and useful quantities

Let ${\displaystyle \mathbf {e} _{1}}$, ${\displaystyle \mathbf {e} _{2}}$, and ${\displaystyle \mathbf {e} _{3}}$ respectively be unit vectors along the ${\displaystyle x}$, ${\displaystyle y}$, and ${\displaystyle z}$ axes. These represent the covariant basis; computing their dot products gives the metric tensor:

${\displaystyle [g_{ij}]={\begin{pmatrix}1&0&\sin(\phi )\\0&1&0\\\sin(\phi )&0&1\end{pmatrix}},\qquad [g^{ij}]={\frac {1}{\cos ^{2}(\phi )}}{\begin{pmatrix}1&0&-\sin(\phi )\\0&\cos ^{2}(\phi )&0\\-\sin(\phi )&0&1\end{pmatrix}}}$

where

${\displaystyle \quad g_{13}=\cos \left({\frac {\pi }{2}}-\phi \right)=\sin(\phi )}$

and

${\displaystyle {\sqrt {g}}=\mathbf {e} _{1}\cdot (\mathbf {e} _{2}\times \mathbf {e} _{3})=\cos(\phi )}$

which are quantities that will be useful later on.

The contravariant basis is given by^[2]

${\displaystyle \mathbf {e} ^{1}={\frac {\mathbf {e} _{2}\times \mathbf {e} _{3}}{\sqrt {g}}}={\frac {\mathbf {e} _{2}\times \mathbf {e} _{3}}{\cos(\phi )}}}$

${\displaystyle \mathbf {e} ^{2}={\frac {\mathbf {e} _{3}\times \mathbf {e} _{1}}{\sqrt {g}}}=\mathbf {e} _{2}}$

${\displaystyle \mathbf {e} ^{3}={\frac {\mathbf {e} _{1}\times \mathbf {e} _{2}}{\sqrt {g}}}={\frac {\mathbf {e} _{1}\times \mathbf {e} _{2}}{\cos(\phi )}}}$

The contravariant basis isn't a very convenient one to use, however it shows up in definitions so must be considered. We'll favor writing quantities with respect to the covariant basis.

Since the basis vectors are all constant, vector addition and subtraction will simply be familiar component-wise adding and subtraction. Now, let

${\displaystyle \mathbf {a} =\sum _{i}a^{i}\mathbf {e} _{i}\quad {\mbox{and}}\quad \mathbf {b} =\sum _{i}b^{i}\mathbf {e} _{i}}$

where the sums indicate summation over all values of the index (in this case, i = 1, 2, 3). The contravariant and covariant components of these vectors may be related by

${\displaystyle a^{i}=\sum _{j}a_{j}g^{ij}}$

so that, explicitly,

${\displaystyle a^{1}={\frac {a_{1}-\sin(\phi )a_{3}}{\cos ^{2}(\phi )}},}$

${\displaystyle a^{2}=a_{2},}$

${\displaystyle a^{3}={\frac {-\sin(\phi )a_{1}+a_{3}}{\cos ^{2}(\phi )}}.}$

The dot product in terms of contravariant components is then

${\displaystyle \mathbf {a} \cdot \mathbf {b} =\sum _{i}a^{i}b_{i}=a^{1}b^{1}+a^{2}b^{2}+a^{3}b^{3}+\sin(\phi )(a^{1}b^{3}+a^{3}b^{1})}$

and in terms of covariant components

${\displaystyle \mathbf {a} \cdot \mathbf {b} ={\frac {1}{\cos ^{2}(\phi )}}[a_{1}b_{1}+a_{2}b_{2}\cos ^{2}(\phi )+a_{3}b_{3}-\sin(\phi )(a_{1}b_{3}+a_{3}b_{1})].}$

Calculus

By definition,^[3] the gradient of a scalar function f is

${\displaystyle \nabla f=\sum _{i}\mathbf {e} ^{i}{\frac {\partial f}{\partial q^{i}}}={\frac {\partial f}{\partial x}}\mathbf {e} ^{1}+{\frac {\partial f}{\partial y}}\mathbf {e} ^{2}+{\frac {\partial f}{\partial z}}\mathbf {e} ^{3}}$

where ${\displaystyle q_{i}}$ are the coordinates x, y, z indexed. Recognizing this as a vector written in terms of the contravariant basis, it may be rewritten:

${\displaystyle \nabla f={\frac {{\frac {\partial f}{\partial x}}-\sin(\phi ){\frac {\partial f}{\partial z}}}{\cos(\phi )^{2}}}\mathbf {e} _{1}+{\frac {\partial f}{\partial y}}\mathbf {e} _{2}+{\frac {-\sin(\phi ){\frac {\partial f}{\partial x}}+{\frac {\partial f}{\partial z}}}{\cos(\phi )^{2}}}\mathbf {e} _{3}.}$

The divergence of a vector ${\displaystyle \mathbf {a} }$ is

${\displaystyle \nabla \cdot \mathbf {a} ={\frac {1}{\sqrt {g}}}\sum _{i}{\frac {\partial }{\partial q^{i}}}\left({\sqrt {g}}a^{i}\right)={\frac {\partial a^{1}}{\partial x}}+{\frac {\partial a^{2}}{\partial y}}+{\frac {\partial a^{3}}{\partial z}}.}$

and of a tensor ${\displaystyle \mathbf {A} }$

${\displaystyle \nabla \cdot \mathbf {A} ={\frac {1}{\sqrt {g}}}\sum _{i,j}{\frac {\partial }{\partial q^{i}}}\left({\sqrt {g}}a^{ij}\mathbf {e} _{j}\right)=\sum _{i,j}\mathbf {e} _{j}{\frac {\partial a^{ij}}{\partial q^{i}}}.}$

The Laplacian of f is

${\displaystyle \nabla ^{2}f=\nabla \cdot \nabla f={\frac {1}{\cos(\phi )^{2}}}\left({\frac {\partial ^{2}f}{\partial x^{2}}}+{\frac {\partial ^{2}f}{\partial z^{2}}}-2\sin(\phi ){\frac {\partial ^{2}f}{\partial x\partial z}}\right)+{\frac {\partial ^{2}f}{\partial y^{2}}}}$

and, since the covariant basis is normal and constant, the vector Laplacian is the same as the componentwise Laplacian of a vector written in terms of the covariant basis.

While both the dot product and gradient are somewhat messy in that they have extra terms (compared to a Cartesian system) the advection operator which combines a dot product with a gradient turns out very simple:

${\displaystyle (\mathbf {a} \cdot \nabla )={\biggl (}\sum _{i}a^{i}e_{i}{\biggr )}\cdot {\biggl (}\sum _{i}{\frac {\partial }{\partial q^{i}}}\mathbf {e} ^{i}{\biggr )}={\biggl (}\sum _{i}a^{i}{\frac {\partial }{\partial q^{i}}}{\biggr )}}$

which may be applied to both scalar functions and vector functions, componentwise when expressed in the covariant basis.

Finally, the curl of a vector is

${\displaystyle \nabla \times \mathbf {a} =\sum _{i,j,k}\mathbf {e} _{k}\epsilon ^{ijk}{\frac {\partial a_{j}}{\partial q^{i}}}=}$

${\displaystyle {\frac {1}{\cos(\phi )}}\left(\left(\sin(\phi ){\frac {\partial a^{1}}{\partial y}}+{\frac {\partial a^{3}}{\partial y}}-{\frac {\partial a^{2}}{\partial z}}\right)\mathbf {e} _{1}+\left({\frac {\partial a^{1}}{\partial z}}+\sin(\phi )\left({\frac {\partial a^{3}}{\partial z}}-{\frac {\partial a^{1}}{\partial x}}\right)-{\frac {\partial a^{3}}{\partial x}}\right)\mathbf {e} _{2}+\left({\frac {\partial a^{2}}{\partial x}}-{\frac {\partial a^{1}}{\partial y}}-\sin(\phi ){\frac {\partial a^{3}}{\partial y}}\right)\mathbf {e} _{3}\right).}$

References

This page was last edited on 5 November 2023, at 14:56