| Overview | |
|---|---|
| Locale | Western Pennsylvania |
| Dates of operation | February 9, 1853–1860 |
| Successor | Western Pennsylvania Railroad |
| Technical | |
| Track gauge | 4 ft 8+1⁄2 in (1,435 mm) |
| Length | 87 miles (140 km) (planned) 57 miles (92 km) (constructed) |
The North Western Railroad was a shortline railroad located in the western part of the U.S. state of Pennsylvania in the United States. It organized in 1853, and was purchased by the Western Pennsylvania Railroad in 1859 after completing only a portion of its route.
History
Formation
The North Western Railroad was chartered by the state of Pennsylvania on February 9, 1853,[1][2] and authorized to construct a rail line from a point at or west of Johnstown, Pennsylvania. The eastern terminus was to connect either with the Pennsylvania Railroad or the Allegheny Portage Railroad.[3] The charter directed the railroad to pass through the towns of Freeport[1] and Butler and proceed to the Pennsylvania-Ohio state boundary somewhere within Lawrence County, Pennsylvania.[3]
The charter permitted each county through which the railroad passed to purchase stock worth up to 10 percent of the assessed value of the railroad. Butler and Lawrence counties both did so. Later in 1853, the Pennsylvania General Assembly enacted legislation amending the railroad's charter, permitting the city of Philadelphia to purchase up to 15,000 shares of the railroad. In return, the city was to be given three seats on the railroad's board of directors. The city also made its purchase.[3] Another $800,000 ($28,100,000 in 2022 dollars) in bonds were sold to finance construction.[1]
Route and construction
The North Western Railroad settled on Blairsville as its eastern terminus.[3] A 2.5 miles (4.0 km) branch line[2] connected it with the Indiana Branch of the Pennsylvania Railroad. The western terminus of the North Western Railroad was New Castle in Lawrence County. The North Western intended to connect with the Cleveland and Mahoning Railroad there.[3] The New Castle connection was important: The Pennsylvania Railroad ("the Pennsy") was a standard gauge road, as was the Cleveland and Mahoning. Until this point in time, the Pennsy could send no railcars west of Pittsburgh, since its connections there were with broad gauge railroads. By sending its cars over the North Western and the Cleveland and Mahoning, the Pennsy could move freight all the way to Chicago without the need for transshipment.[4]
The route of the North Western Railroad was determined by its chief engineer, Robert Clark.[4] The route he selected largely followed streams and rivers to achieve the lowest possible slope.[2] Clark left the railroad's employ soon after finishing the route survey.[4] The planned route required an 800-foot (240 m) long tunnel between Butler and Freeport, and a 1,050-foot (320 m) long tunnel between Freeport and Blairsville. Three major bridges were needed. A 1,250-foot (380 m) long bridge at Freeport was required to carry the road over the Allegheny River and the Pennsylvania Canal, while the other two major bridges carried the road over the Loyalhanna and Conemaugh Rivers. The route between Blairsville and Freeport needed another 14 bridges over ravines (one 130-foot (40 m) long), and five major cuts (all of extreme depth) of 50 to 76 feet (15 to 23 m) through ridges and hilly land.[2]
Construction began in August 1853.[1] Most of the work of grading the route and building bridges was supervised by the new chief engineer, Samuel H. Kneass. By 1860, Kneass had graded and ballasted the line from Blairsville to Allegheny Junction in Butler County. Past Allegheny Junction, some grading had been completed in Butler but not Lawrence county. The superstructure of some bridges along the line was also complete.[4]
Bankruptcy and purchase
The North Western Railroad ran out of construction funds in 1858. On July 5, 1859, the bondholders of the North Western Railroad took control of the company as part of a foreclosure proceeding.[1] They obtained a charter for a new railroad, the Western Pennsylvania Railroad, and transferred control of the North Western to this new company.[4] The Western Pennsylvania Railroad was in turn purchased by the Pennsy in 1862,[5] which completed the line to Saltsburg in 1863. Traffic began running from Blairsville to Saltsburg while work continued on the rest of the line to Allegheny Junction. This latter part of the line opened to traffic in the fall of 1864. The Pennsy then extended the line to Freeport, and opened the last leg of the line on August 1, 1865.[4]
References
Bibliography
- Poor, Henry Varnum (1860). History of the Railroads and Canals of the United States. New York: John H.l Schultz & Co.
- Stewart, Joshua Thompson (1913). Indiana County, Pennsylvania: Her People, Past and Present, Embracing a History of the County. Chicago: J.H. Beers & Co.
- Wilson, William Bender (1899). History of the Pennsylvania Railroad Company: With Plan of Organization, Portraits of Officials and Biographical Sketches. Philadelphia: Henry T. Coates & Co.
This page was last edited on 30 March 2021, at 20:24