Part of a series of articles about  
Calculus  





Specialized 

In differential calculus, there is no single uniform notation for differentiation. Instead, several different notations for the derivative of a function or variable have been proposed by different mathematicians. The usefulness of each notation varies with the context, and it is sometimes advantageous to use more than one notation in a given context. The most common notations for differentiation (and its opposite operation, the antidifferentiation or indefinite integration) are listed below.
YouTube Encyclopedic

1/5Views:11 4932 9062 86223 25125 920

✪ Calculus I  Derivative Notation

✪ Derivative Notation: Lagrange, Leibniz, Euler, and Newton

✪ Calculus 1: What is a Derivative? (5 of 9) Different Notations for Derivatives

✪ Calculus  Chain rule using Leibniz notation

✪ Derivative Notation
Transcription
Contents
Leibniz's notation
The original notation employed by Gottfried Leibniz is used throughout mathematics. It is particularly common when the equation y = f(x) is regarded as a functional relationship between dependent and independent variables y and x. Leibniz's notation makes this relationship explicit by writing the derivative as
The function whose value at x is the derivative of f at x is therefore written
Higher derivatives are written as
This is a suggestive notational device that comes from formal manipulations of symbols, as in,
Logically speaking, these equalities are not theorems. Instead, they are simply definitions of notation.
The value of the derivative of y at a point x = a may be expressed in two ways using Leibniz's notation:
 .
Leibniz's notation allows one to specify the variable for differentiation (in the denominator). This is especially helpful when considering partial derivatives. It also makes the chain rule easy to remember and recognize:
Leibniz's notation for differentiation does not require assigning a meaning to symbols such as dx or dy on their own, and some authors do not attempt to assign these symbols meaning. Leibniz treated these symbols as infinitesimals. Later authors have assigned them other meanings, such as infinitesimals in nonstandard analysis or exterior derivatives.
Leibniz's notation for antidifferentiation
∫∫ y dx^{2}
Leibniz introduced the integral symbol ∫ in Analyseos tetragonisticae pars secunda and Methodi tangentium inversae exempla (both from 1675). It is now the standard symbol for integration.
Lagrange's notation
f″(x)
One of the most common modern notations for differentiation is due to Joseph Louis Lagrange. In Lagrange's notation, a prime mark denotes a derivative. If f is a function, then its derivative evaluated at x is written
 .
Lagrange first used the notation in unpublished works, and it appeared in print in 1770.^{[1]}
Higher derivatives are indicated using additional prime marks, as in for the second derivative and for the third derivative. The use of repeated prime marks eventually becomes unwieldy. Some authors continue by employing Roman numerals, as in
to denote fourth, fifth, sixth, and higher order derivatives. Other authors use Arabic numerals in parentheses, as in
This notation also makes it possible to describe the nth derivative, where n is a variable. This is written
Unicode characters related to Lagrange's notation include
 U+2032 ◌′ PRIME (derivative)
 U+2033 ◌″ DOUBLE PRIME (double derivative)
 U+2034 ◌‴ TRIPLE PRIME (third derivative)
 U+2057 ◌⁗ QUADRUPLE PRIME (fourth derivative)
When there are two independent variables for a function f(x,y), the following convention may be followed:^{[2]}
Lagrange's notation for antidifferentiation
f^{(−2)}(x)
When taking the antiderivative, Lagrange followed Leibniz's notation:^{[1]}
However, because integration is the inverse of differentiation, Lagrange's notation for higher order derivatives extends to integrals as well. Repeated integrals of f may be written as
 for the first integral (this is easily confused with the inverse function ),
 for the second integral,
 for the third integral, and
 for the nth integral.
Euler's notation
D^{2}f
Leonhard Euler's notation uses a differential operator suggested by Louis François Antoine Arbogast, denoted as D (D operator)^{[3]} or D̃ (Newton–Leibniz operator)^{[4]} When applied to a function f(x), it is defined by
Higher derivatives are notated as powers of D, as in^{[2]}
 for the second derivative,
 for the third derivative, and
 for the nth derivative.
Euler's notation leaves implicit the variable with respect to which differentiation is being done. However, this variable can also be notated explicitly. When f is a function of a variable x, this is done by writing^{[2]}
 for the first derivative,
 for the second derivative,
 for the third derivative, and
 for the nth derivative.
When f is a function of several variables, it's common to use a "∂" rather than D. As above, the subscripts denote the derivatives that are being taken. For example, the second partial derivatives of a function f(x, y) are:^{[2]}
Euler's notation is useful for stating and solving linear differential equations, as it simplifies presentation of the differential equation, which can make seeing the essential elements of the problem easier.
Euler's notation for antidifferentiation
_{x}y
D^{−2}f
Euler's notation can be used for antidifferentiation in the same way that Lagrange's notation is.^{[5]} as follows^{[4]}
 for a first antiderivative,
 for a second antiderivative, and
 for an nth antiderivative.
Newton's notation
Newton's notation for differentiation (also called the dot notation for differentiation) places a dot over the dependent variable. That is, if y is a function of t, then the derivative of y with respect to t is
Higher derivatives are represented using multiple dots, as in
Newton extended this idea quite far:^{[6]}
Unicode characters related to Newton's notation include:
 U+0307 ◌̇ COMBINING DOT ABOVE (derivative)
 U+0308 ◌̈ COMBINING DIAERESIS (double derivative)
 U+20DB ◌⃛ COMBINING THREE DOTS ABOVE (third derivative) ← replaced by "combining diaeresis" + "combining dot above".
 U+20DC ◌⃜ COMBINING FOUR DOTS ABOVE (fourth derivative) ← replaced by "combining diaeresis" twice.
 U+030D ◌̍ COMBINING VERTICAL LINE ABOVE (integral)
 U+030E ◌̎ COMBINING DOUBLE VERTICAL LINE ABOVE (second integral)
 U+25AD ▭ WHITE RECTANGLE (integral)
 U+20DE ◌⃞ COMBINING ENCLOSING SQUARE (integral)
 U+1DE0 ◌ᷠ COMBINING LATIN SMALL LETTER N (nth derivative)
Newton's notation is generally used when the independent variable denotes time. If location y is a function of t, then denotes velocity^{[7]} and denotes acceleration.^{[8]} This notation is popular in physics and mathematical physics. It also appears in areas of mathematics connected with physics such as differential equations. It is only popular for first and second derivatives, but in applications these are usually the only derivatives that are necessary.
When taking the derivative of a dependent variable y = f(x), an alternative notation exists:^{[9]}
Newton developed the following partial differential operators using sidedots on a curved X ( ⵋ ). Definitions given by Whiteside are below:^{[10]}^{[11]}
Newton's notation for integration
Newton developed many different notations for integration in his Quadratura curvarum (1704) and later works: he wrote a small vertical bar or prime above the dependent variable (y̍ ), a prefixing rectangle (▭y), or the inclosure of the term in a rectangle (y) to denote the fluent or time integral (absement).
To denote multiple integrals, Newton used two small vertical bars or primes (y̎), or a combination of previous symbols ▭y̍y̍, to denote the second time integral (absity).
Higher order time integrals were as follows:^{[12]}
This mathematical notation did not become widespread because of printing difficulties and the Leibniz–Newton calculus controversy.
Partial derivatives
When more specific types of differentiation are necessary, such as in multivariate calculus or tensor analysis, other notations are common.
For a function f(x), we can express the derivative using subscripts of the independent variable:
This type of notation is especially useful for taking partial derivatives of a function of several variables.
Partial derivatives are generally distinguished from ordinary derivatives by replacing the differential operator d with a "∂" symbol. For example, we can indicate the partial derivative of f(x, y, z) with respect to x, but not to y or z in several ways:
 .
What makes this distinction important is that a nonpartial derivative such as may, depending on the context, be interpreted as a rate of change in relative to when all variables are allowed to vary simultaneously, whereas with a partial derivative such as it is explicit that only one variable should vary.
Other notations can be found in various subfields of mathematics, physics, and engineering, see for example the Maxwell relations of thermodynamics. The symbol is the derivative of the temperature T with respect to the volume V while keeping constant the entropy (subscript) S, while is the derivative of the temperature with respect to the volume while keeping constant the pressure P. This becomes necessary in situations where the number of variables exceeds the degrees of freedom, so that one has to choose which other variables are to be kept fixed.
Higherorder partial derivatives with respect to one variable are expressed as
Mixed partial derivatives can be expressed as
In this last case the variables are written in inverse order between the two notations, explained as follows:
Notation in vector calculus
Vector calculus concerns differentiation and integration of vector or scalar fields. Several notations specific to the case of threedimensional Euclidean space are common.
Assume that (x, y, z) is a given Cartesian coordinate system, that A is a vector field with components , and that is a scalar field.
The differential operator introduced by William Rowan Hamilton, written ∇ and called del or nabla, is symbolically defined in the form of a vector,
where the terminology symbolically reflects that the operator ∇ will also be treated as an ordinary vector.
 Gradient: The gradient of the scalar field is a vector, which is symbolically expressed by the multiplication of ∇ and scalar field ,
 Divergence: The divergence of the vector field A is a scalar, which is symbolically expressed by the dot product of ∇ and the vector A,
 Laplacian: The Laplacian of the scalar field is a scalar, which is symbolically expressed by the scalar multiplication of ∇^{2} and the scalar field φ,
 Rotation: The rotation , or , of the vector field A is a vector, which is symbolically expressed by the cross product of ∇ and the vector A,
Many symbolic operations of derivatives can be generalized in a straightforward manner by the gradient operator in Cartesian coordinates. For example, the singlevariable product rule has a direct analogue in the multiplication of scalar fields by applying the gradient operator, as in
Further notations have been developed for more exotic types of spaces. For calculations in Minkowski space, the d'Alembert operator, also called the d'Alembertian, wave operator, or box operator is represented as , or as when not in conflict with the symbol for the Laplacian.
See also
References
 ^ ^{a} ^{b} Lagrange, Nouvelle méthode pour résoudre les équations littérales par le moyen des séries (1770), p. 2526. http://gdz.sub.unigoettingen.de/dms/load/img/?PID=PPN308900308%7CLOG_0017&physid=PHYS_0031
 ^ ^{a} ^{b} ^{c} ^{d} The Differential and Integral Calculus (Augustus De Morgan, 1842). pp. 267268
 ^ "The D operator  Differential  Calculus  Maths Reference with Worked Examples". www.codecogs.com. Archived from the original on 20160119.
 ^ ^{a} ^{b} Weisstein, Eric W. "Differential Operator." From MathWorldA Wolfram Web Resource. "Archived copy". Archived from the original on 20160121. Retrieved 20160207.CS1 maint: archived copy as title (link)
 ^ Weisstein, Eric W. "Repeated Integral." From MathWorldA Wolfram Web Resource. "Archived copy". Archived from the original on 20160201. Retrieved 20160207.CS1 maint: archived copy as title (link)
 ^ Newton's notation reproduced from:
 1st to 5th derivatives: Quadratura curvarum (Newton, 1704), p. 7 (p. 5r in original MS: "Archived copy". Archived from the original on 20160228. Retrieved 20160205.CS1 maint: archived copy as title (link)).
 1st to 7th, nth and (n+1)th derivatives: Method of Fluxions (Newton, 1736), pp. 313318 and p. 265 (p. 163 in original MS: "Archived copy". Archived from the original on 20170406. Retrieved 20160205.CS1 maint: archived copy as title (link))
 1st to 5th derivatives : A Treatise of Fluxions (Colin MacLaurin, 1742), p. 613
 1st to 4th and nth derivatives: Articles "Differential" and "Fluxion", Dictionary of Pure and Mixed Mathematics (Peter Barlow, 1814)
 1st to 4th, 10th and nth derivatives: Articles 622, 580 and 579 in A History of Mathematical Notations (F .Cajori, 1929)
 1st to 6th and nth derivatives: The Mathematical Papers of Isaac Newton Vol. 7 16911695 (D. T. Whiteside, 1976), pp.88 and 17
 1st to 3rd and nth derivatives: A History of Analysis (Hans Niels Jahnke, 2000), pp. 8485
 ^ Weisstein, Eric W. "Overdot." From MathWorldA Wolfram Web Resource. "Archived copy". Archived from the original on 20150905. Retrieved 20160205.CS1 maint: archived copy as title (link)
 ^ Weisstein, Eric W. "Double Dot." From MathWorldA Wolfram Web Resource. "Archived copy". Archived from the original on 20160303. Retrieved 20160205.CS1 maint: archived copy as title (link)
 ^ Article 580 in Florian Cajori, A History of Mathematical Notations (1929), Dover Publications, Inc. New York. ISBN 0486677664
 ^ "Patterns of Mathematical Thought in the Later Seventeenth Century", Archive for History of Exact Sciences Vol. 1, No. 3 (D. T. Whiteside, 1961), pp. 179388
 ^ S.B. Engelsman has given more strict definitions in Families of Curves and the Origins of Partial Differentiation (2000), pp. 223226
 ^ Newton's notation for integration reproduced from:
 1st to 3rd integrals: Quadratura curvarum (Newton, 1704), p. 7 (p. 5r in original MS: "Archived copy". Archived from the original on 20160228. Retrieved 20160205.CS1 maint: archived copy as title (link))
 1st to 3rd integrals: Method of Fluxions (Newton, 1736), pp. 265266 (p. 163 in original MS: "Archived copy". Archived from the original on 20170406. Retrieved 20160205.CS1 maint: archived copy as title (link))
 4th integrals: The Doctrine of Fluxions (James Hodgson, 1736), pp. 54 and 72
 1st to 2nd integrals: Articles 622 and 365 in A History of Mathematical Notations (F .Cajori, 1929)
External links
 Earliest Uses of Symbols of Calculus, maintained by Jeff Miller.