Ner-A-Car

Ner-A-Car

Manufacturer	Ner-A-Car Corporation (United States) Sheffield-Simplex (United Kingdom)
Also called	Neracar
Production	1921–1927
Assembly	Syracuse, New York, USA Kingston-on-Thames, UK
Class	Feet Forward
Top speed	35 mph
Power	2.5 hp
Transmission	5-position friction drive CVT, 3-speed manual
Frame type	Pressed steel perimeter frame
Suspension	Front: Double leading arms with hub-center steering^[1] Rear: none, except for 1926 de-luxe model with swingarm and quarter-elliptic leaf springs^[2]
Brakes	Drum, operated by pedal located on left foot board.
Tires	26 x 3-inch non-skid
Wheelbase	59 in (1,500 mm)^[3] (standard) 68.5 in (1,740 mm) (with rear suspension)^[2]
Dimensions	L: 84 in (2,100 mm)
Weight	175 pounds (dry)
Turning radius	19 ft 6 in (5,940 mm) turning circle^[3]

The Ner-A-Car was a type of feet forwards motorcycle designed by Carl Neracher in 1918. It used an unusual steel-channel chassis, much like an automobile, and hub-center steering at the front wheel, making it 'nearly a car' in design. The Ner-A-Car was the most successful hub-center steering motorcycle ever produced, with sales far eclipsing earlier or later examples of this design, such as the Yamaha GTS1000 or Bimota Tesi. About 10,000 Neracars were manufactured in the United States by the Ner-A-Car Corporation (under the Neracar name), while around 6,500 are believed to have been produced in England under licence by the Sheffield-Simplex company between 1921 and 1926 under the Ner-A-Car name.

YouTube Encyclopedic

1/1
Views:
1 559

Transcription

Design

Carl Neracher's design had several unusual features, including a low-slung perimeter frame chassis,^[1]^[4]^[5]^[6] hub-center steering, all-enclosing bodywork, the feet-forward riding position, and a friction drive transmission,^[1]^[7] driven by the flywheel of the engine. The low-slung frame, front suspension, hub-center steering, and long wheelbase contributed to the cycle's exceptional stability.^[8]^[9]

The friction drive transmission was similar in concept to a continuously variable transmission, and had five fixed indents on the shift lever, that corresponding to pre-set drive ratios.^[2] The driven friction wheel was moved between the center and outer rim of the flywheel to effect a change in drive ratio; nearer the center was a 'lower' speed, farther towards the rim of the flywheel was the 'higher' speed. The design was simple and ingenious, with a feeling nearly like an automatic transmission.^[10]

Carl Neracher relied on a design from the 1911 Detroit Bi-Car Co. for the Neracar, and a license was granted by Bi-Car president John J. Chapin, as acknowledged on the Neracar chassis.^[10] The Neracar resembled the Bi-Car in outline, which was "an attempt to construct a two-wheel vehicle embracing many desirable features of the automobile".^[11] The Bi-Car used an automobile type chassis of thin sheet steel, with splayed forward chassis arms holding the front wheel, that was steered by a linkage to the handlebars. The Neracar also resembled the Militaire Autocycle of 1911,^[12] which also used a feet-forward riding position, pressed-steel chassis, and hub-center steering. The Detroit Bi-Car and Militaire were still not the first production hub-center steered motorcycle: that title appears to belong to the Zenith Bi-Car of 1905, which was a design licensed from Tooley's Patent Bi-Car of 1904.^[13]

Manufacture and promotion

Neracher licensed his design to Sheffield-Simplex to manufacture Ner-A-Cars for the British and Commonwealth markets before he could find any investors to manufacture them in the United States. Eventually, a group of investors, including King C. Gillette and Crouse-Hinds Company founder Huntington B. Crouse, funded the Ner-A-Car Corporation, which began production of Neracars in October 1921.^[14]

The Ner-A-Car was marketed as a low cost alternative to a motor car. The advertisers publicized the Ner-A-Car's step-through design and its protection from road grime and engine fluids, both of which allowed riders to wear ordinary clothes, including skirts, cassocks, and kilts, while riding the cycle.^[4]^[5]^[14]

Erwin G. "Cannonball" Baker rode a Neracar from Staten Island, New York, to Los Angeles, California, in the autumn of 1922. The journey of 3,364.4 miles took 174 hours and one minute to complete, with operating costs totalling $15.70 at the time. Baker later started a Neracar dealership in Los Angeles.^[15]

The Ner-A-Car won several medals for reliability in long-distance road trials, including the team prize in the 1925 ACU 1000 mile Stock Machine Trial.^[2]

Models

Neracar (United States)

The Ner-A-Car Corporation in Syracuse made three models of Neracar. The Type A had solo seating, the original 221 cc two-stroke engine, one headlight, and one taillight. The Type B had a larger engine, two seats, and two headlights. A commercial version, the Type CB, had a pair of headlights, a pair of drum brakes on the rear wheel, and a steel utility box rated to carry 150 pounds.^[16]

In the US a 255 cc model was introduced in 1924.^{[citation needed]}

A five-speed Neracar was advertised as a "Christmas Special" for US$175 in November 1927.^[17]

Production of the Neracar ended in 1927.^[1]

Ner-A-Car (United Kingdom)

British licensee Sheffield-Simplex began production of Ner-A-Cars in 1921 with the original American design with the 221 cc two-stroke engine and the friction drive transmission^[18] In 1923 the engine was enlarged to 285 cc,^[3]^[18] with a 70 mm bore and a 74 mm stroke.^[3]

Sheffield-Simplex developed a newer version with a Blackburne four-stroke side-valve engine, displacing 348 cc with a 71 mm bore and an 88 mm stroke, driving through a three-speed Sturmey-Archer manual transmission.^[5] This version was introduced in 1925 as the Model C,^[5] with the earlier two-stroke friction-drive model continuing as the Model B.^[2] A Sports C, with an overhead-valve version of the Model C engine, was also offered.^[2]

A de-luxe model was introduced in 1926 with swingarm rear suspension controlled by quarter-elliptic leaf springs, a bucket seat with air cushions, and a fairing with an adjustable Triplex windshield and an instrument panel. A countershaft concentric with the swingarm pivot was driven by a chain from the transmission and drove the rear wheel. The addition of rear suspension increased the wheelbase of the de-luxe model to 68.5 inches (1,740 mm)^[2]

Production of the Ner-A-Car at Sheffield-Simplex ended in the autumn of 1926.^[2]

Notes

^ ^a ^b ^c ^d Frank 2012.
^ ^a ^b ^c ^d ^e ^f ^g ^h Willoughby 1977, p. 32.
^ ^a ^b ^c ^d Willoughby 1977, p. 31.
^ ^a ^b Willoughby 1977, p. 30.
^ ^a ^b ^c ^d Wilson 1995, p. 140.
^ Brown 2003.
^ Willoughby 1977, pp. 31–32.
^ Willoughby 1977, pp. 30–31.
^ Hodgdon 1951.
^ ^a ^b The Motorcycle Industry in New York State, 2001, Geoffrey N. Stein. New York State Museum, Albany, NY
^ The Bicycling World, 1911
^ The Complete Illustrated Encyclopedia of American Motorcycles, 1999, Tod Rafferty, Courage Books, Philadelphia
^ The MotorCycle, Aug 28, 1905
^ ^a ^b Hunter 2013, p. 6B.
^ Pfouts 1992, p. 29.
^ Pfouts 1992, p. 30.
^ "C. F. Solomonson". Oakland Tribune. Oakland, California. 24 November 1927.
^ ^a ^b Wilson 1995, p. 224.

References

Brown, Roland (April 2003). "Alternative Motorcycling - First production motorcycle with hub-center steering". Classic Bike Guide (144). Horncastle, UK: Mortons Media Group. ISSN 0959-7123. Archived from the original on 24 July 2008. Retrieved 12 July 2006.
Frank, Aaron (13 January 2012). "Ner-A-Car – The Automobile Alternative". motorcyclistonline.com/ Motorcyclist]. Retrieved 28 April 2015.
Hodgdon, Ted (March 1951). "Famous Motorcycles of Yesteryear – The Neracar". Motorcyclist. First of all, the Neracar is believed by many to be the most stable and surest-footed motorcycle of all time—bar none.
Hunter, Thomas (15 February 2013). "Neracar: Motoring on two wheels" (PDF). The Central New York Business Journal. Syracuse, NY USA: CNY Business Review. p. 6B. ISSN 1050-3005. OCLC 225102594. Archived from the original (pdf) on 14 May 2013. Retrieved 14 May 2013.
Pfouts, Chris (August 1992). Wood, Bill (ed.). "Neracar". American Motorcyclist. 46 (8). Westerville, OH USA: American Motorcyclist Association: 28–30. ISSN 0277-9358. Retrieved 27 April 2015.
Rafferty, Tod (1999). The Complete Illustrated Encyclopedia of American Motorcycles. Philadelphia: Courage. ISBN 0-7624-0528-7.
Stein, Geoffrey (2001). The Motorcycle Industry in New York State. Albany: New York State Museum. ISBN 1-55557-170-0.
Willoughby, Vic (1977) [1975]. "Ner-a-Car". Classic Motorcycles (Third impression ed.). Hamlyn. pp. 30–32. ISBN 0-600318-70-2.
Wilson, Hugo (1995). The Encyclopedia of the Motorcycle. London: Dorling Kindersley. ISBN 0-7513-0206-6.