Many countries have standardized the labeling of fertilizers to indicate their contents of major nutrients.[1][2] The most common labeling convention, the NPK or N-P-K label, shows the amounts of the chemical elements nitrogen, phosphorus, and potassium.
YouTube Encyclopedic
-
1/3Views:58 51626 620580
-
How to Read a Fertilizer Label
-
Basic Liquid Fertilizer Label Calculations
-
How to read a Fertilizer Label
Transcription
A regular fertility schedule is an important part of maintaining a healthy green space, as long as it's done properly. Not just the type of fertilizer you choose, but the application rate and seasonal aspect are all important considerations when it comes to caring for your turf grass. Once you've determined the nutrients the turf needs through a proper soil test, you'll need to choose a fertilizer that will bring your soil to the right balance for the plant material that you selected. Knowing how to read that fertilizer label will help you choose the right product, so let's go over the basics. In this example, here at the top we have the manufacturer name, which is Nutrients Plus. Right below that we have the brand name of the fertilizer, which is Screamin' Green. Below those we have three numbers which may be something you are familiar with but you don't know the meaning of. These numbers identify the fertilizer ratio contained within the bag: nitrogen, or n; phosphorus, or p; and potassium, identified as K on the periodic table. A general rule of thumb that will help you remember the effect each nutrient has on your plant is to think up, down, and all around. Up for nitrogen, which helps above plant growth and will help to green things up. Down for phosphorous, which helps root growth as well as promotes flower and fruit production. All around for potassium, which is important for all around plant health. More specifically, potassium helps to regulate water and build strong cells, which will help make your plant more hardy and less prone to disease. Also included on the label is the guaranteed analysis. The manufacturer guarantees that the stated percentages of NPK will be in the bag as well as the source each nutrient is derived from. Any other plant food elements and their source, like iron or micronutrients, will also be included in the analysis. You may have noticed that the ratio percentages don't add up to 100%. The remaining material in the bag is made up of filler or inert ingredients that help disperse the active ingredients. Finally, we have the net weight of the bag. This information will be important later when we're calculating the application rate. This should be a good starting point for understanding the information contained in a fertilizer label. If you have any more questions, feel free to drop into your local Ewing branch for more answers.
Common labeling conventions
The NPK analysis label
Fertilizers are usually labeled with three numbers, as in 18-20-10, indicating the relative content of the primary macronutrients nitrogen (N), phosphorus (P), and potassium (K), respectively.
More precisely, the first number ("N value") is the percentage of elemental nitrogen by weight in the fertilizer; that is, the mass fraction of nitrogen times 100. The second number ("P value") is the percentage by weight of phosphorus pentoxide P
2O
5. The third number ("K value") is the equivalent content of potassium oxide K
2O.[3]
For example, a 15-13-20 fertilizer would contain 15% by weight of nitrogen, 13% by weight of P
2O
5, 20% by weight of K
2O, and 52% of some inert ingredient.
Other labeling conventions
In the U.K., fertilizer labeling regulations allow for reporting the elemental mass fractions of phosphorus and potassium. The regulations stipulate that this should be done in parentheses after the standard N-P-K values, as in "15-30-15 (15-13-13)".[4]
In Australia, macronutrient fertilizers are labeled with an "N-P-K-S" system, which uses elemental mass fractions rather than the standard N-P-K values and includes the amount of sulfur (S) contained in the fertilizer. [5]
Fertilizers with additional macronutrients (S, Ca, Mg) may add more numbers to the N-P-K ratio to indicate the amount. The additional numbers are similarly reported in the oxide mass fraction form. For example, a Polish fertilizer labeled "NPK (Ca,S) 4-12-12 (14-29)" has an equivalent of 14% soluble calcium oxide and 29% total sulfur trioxide.[6]
Converting nutrient analysis to composition
The values in an NPK fertilizer label are related to the concentrations (by weight) of phosphorus and potassium elements as follows:
- P
2O
5 consists of 56.4% elemental oxygen and 43.6% elemental phosphorus by weight. Therefore, the elemental phosphorus percentage of a fertilizer is 0.436 times its P value. - K
2O consists of 17% oxygen and 83% elemental potassium by weight. Therefore, the elemental potassium percentage is 0.83 times the K value.
The N value in NPK labels represents actual percentage of nitrogen element by weight, so it does not need to be converted.
So, for example, an 18−51−20 fertilizer contains by weight
- 18% elemental nitrogen,
- 0.436 × 51 = 22% elemental phosphorus, and
- 0.83 × 20 = 17% elemental potassium.
As another example, the fertilizer sylvite is a naturally occurring mineral consisting mostly of potassium chloride, KCl. Pure potassium chloride contains one potassium atom (whose atomic mass is 39.09 g/mol) for every chlorine atom (whose atomic mass is 35.45 g/mol). Therefore, pure KCl is 39.09/(39.09 + 35.45) = 52% potassium and 48% chlorine by weight. Its K value is therefore 52/0.83 = 63; that is, a fertilizer that gets all its potassium from K
2O and has the same potassium contents as pure KCl would have to be 63% K
2O. Pure KCl fertilizer would thus be labeled 0-0-63. Since sylvite contains other compounds that contribute no N, P, or K, it is usually labeled 0-0-60.
NPK values for commercial fertilizers
NPK values for various synthetic fertilizers[7]
- 15-0-0 Calcium nitrate
- 21-0-0 Ammonium sulphate
- 30-0-0 to 40-0-0 Sulfur-coated urea (slow release)[8]
- 31-0-0 Isobutylidenediurea (~90% slow release)[8]
- 33-0-0 to 34-0-0 Ammonium nitrate
- 35-0-0 Ureaform (~85% slow release, sparingly soluble ureaformaldehyde)[8]
- 40-0-0 Methylene ureas (~70% slow release)[8]
- 46-0-0 Urea (U-46)
- 82-0-0 Anhydrous ammonia
- 10-34-0 to 11-37-0 Ammonium polyphosphate
- 11-48-0 to 11-55-0 Monoammonium phosphate
- 18-46-0 to 21-54-0 Diammonium phosphate
- 7-7-7 Growmore[9]
- 13-0-44 Potassium nitrate
- 0-17-0 to 0-22-0 Superphosphate (Monocalcium phosphate monohydrate with gypsum)
- 0-44-0 to 0-52-0 Triple superphosphate (Monocalcium phosphate monohydrate)
- 0-0-22 Potassium magnesium sulfate (K-mag)
NPK values for mined fertilizer minerals
- 11-8-2 to 16-12-3 bird guano[10]
- 0-3-0 to 0-8-0 Raw Phosphate Rock (would be 0-34-0 if it were soluble)[11]
- 0-0-60 Potassium chloride
- 0-0-19 Kainite
- 0-0-17 Carnallite
NPK values for biosolids fertilizers and others
- 9-0-0 dairy manure[12]
- 1-0-1 horse manure[12]
- 3-2-2 poultry manure[12]
- 4-12-0 Bone meal
- 5-5-6 Fish blood and bone[13]
- 6-2-0 Milorganite
See also
References
- ^ Chambers, Albert; Sally Rutherford (27 November 2007). "Voluntary Standards for the Fertilizer and Supplements Industry". Retrieved 3 February 2010.
- ^ "Draft Code of Practice for Fertilier Description and Labeling". Fertilizer Industry Federation Association (FIFA). 15 September 2008. Retrieved 3 February 2010.
- ^ nutrient_analysiswww.flairform.com 22 October 2014 Archived 28 October 2014 at the Wayback Machine
- ^ UK Fertilizers Regulations 1990, Schedule 2 Part 1, Para. 7.
- ^ "National Code of Practice for Fertilizer Description & Labelling" (PDF). Australian Government Department of Agriculture, Fisheries and Forestry. Archived from the original (PDF) on 28 February 2015. Retrieved 27 October 2014.
- ^ "NPK (Ca,S) 4-12-12 (14-29) Lubofoska". skladrolny.pl. Retrieved 15 December 2022.
Lubofoska is a fertilizer applied before sowing...
- ^ NPK (Fertilizer) chemicalland21.com accessed 15 December 2022
- ^ a b c d J. B. Sartain, University of Florida, "Food for turf: Slow-release nitrogen", Grounds Maintenance, archived from the original on 29 October 2019, retrieved 28 October 2014
- ^ "Fertiliser labels explained". RHS Advice. Royal Horticultural Society. Retrieved 31 October 2021.
- ^ Bat and seal guano are lower in fertilizer value than bird guano. see Guano
- ^ George Rehm; Michael Schmitt; John Lamb; Gyes Randall; Lowell Busman (2002). "Understanding Phosphorus Fertilizers". University of Minnesota Extension Service. Archived from the original on 5 September 2013. Retrieved 28 October 2014.
- ^ a b c from "Average total N, ammonium N, phosphate and potash content of manure at the time of land application" in Animal Manure As a Plant Nutrient Resource, Bulletin ID-101 (Reviewed 02/05/01), Cooperative Extension Service, Purdue University. West Lafayette, IN 47907 "ID-101". Archived from the original on 12 March 2012. Retrieved 28 October 2014.
- ^ Organic Fish, Blood and Bone Feed – Harrod Horticultural (UK) www.harrodhorticultural.com accessed 15 December 2022