To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

From Wikipedia, the free encyclopedia

M-K TE70-4S
Three of the four SP M-K TE70-4S locomotives on their maiden run in March 1978
Type and origin
Power typeDiesel-electric
BuilderMorrison-Knudsen
Specifications
Gauge4 ft 8+12 in (1,435 mm)
Wheel diameter40 in (100 cm)
Length60 ft 2 in (18.3 m)
Width10 ft 7+12 in (3.2 m)
Height15 ft 10+78 in (4.8 m)
Loco weight279,000 lb (126,552 kg)
Prime moverSulzer 12ASV 25/30
RPM range1000
GeneratorGE GT598 D3A
Traction motorsGE 752
Gear ratio74/18
Performance figures
Maximum speed70 mph (110 km/h)
Power output2,800 hp (2.1 MW)
Career
OperatorsSouthern Pacific Transportation Company
ClassTE70-4S
NicknamesPopsicle
DispositionAll scrapped
[1]

The M-K TE70-4S was a four-axle 2,800 hp (2.1 MW) B-B diesel-electric locomotive built by Morrison-Knudsen. The locomotive was a rebuild of the GE U25B with a Sulzer V-12 prime mover installed. Morrison-Knudsen rebuilt four for the Southern Pacific Railroad in 1978. The experiment proved unsuccessful and no additional units were rebuilt.

Design

The prime mover for the M-K TE70-4S was a Sulzer 12ASV 25/30. Normally found in marine or stationary uses, the 12ASV 25/30 had been in production since 1969. The four-stroke turbocharged engine was rated for a maximum of 3,240 hp (2.4 MW) at 1000 RPM.[2] The locomotives retained the GE GT598 D3A generators and GE 752 traction motors from the U25B. The capability of the prime mover notwithstanding, the locomotive was rated at 2,800 hp (2.1 MW).[3]

The new prime mover required substantial alterations to the cab, carbody, and underframe.[4] The locomotive measured 60 ft 2 in (18.3 m) long by 10 ft 7+12 in (3.2 m) wide, and stood 15 ft 10+78 in (4.8 m) high. It weighed 279,000 lb (126,552 kg).[1]

History

Southern Pacific sent four GE U25Bs (Nos. 7030–7033), then at the end of their service life, to Morrison-Knudsen for rebuilding.[5] Morrison-Knudsen rebuilt the four locomotives in its Boise, Idaho, shops in 1977–1978. The first revenue run occurred beginning March 1, 1978, when the four locomotives handled a SeattleLos Angeles trailer-on-flatcar (TOFC) train between Portland and Los Angeles.[6] Inauspiciously, one of the four locomotives broke down during the trip.[7]

The locomotives carried a unique paint scheme featuring the red-and-orange of the SP's famed "Daylight" passenger trains, albeit in a different style.[8][9] The color scheme led to the nickname "Popsicle". Due to their consistent unreliability, all four were retired in 1987 after less than ten years; none were preserved.[10]

Notes

  1. ^ a b "TE 70-4S Brochure". Morrison-Knudsen. Retrieved April 20, 2017.
  2. ^ Fearon 1978, p. 3
  3. ^ Fearon 1978, p. 4
  4. ^ Fearon 1978, pp. 9–10
  5. ^ Pinkepank & Marre 1979, p. 137
  6. ^ Fearon 1978, pp. 10–11
  7. ^ Pacific News 1978, p. 28
  8. ^ Guernsey et al. 1978, p. 2
  9. ^ Pacific News 1979, p. 4
  10. ^ Lustig 2003, p. 23

References

Further reading

External links

This page was last edited on 24 January 2024, at 06:19
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.