LNWR Whale Precursor Class

LNWR Precursor Class
No. 513, Precursor in photographic grey livery
Type and origin Power type Steam Designer George Whale Builder LNWR Crewe Works Serial number 4415–4419, 4440–4504, 4510–4549, 4660–4679 Build date 1904–1907 Total produced 130
Specifications Configuration: ​  • Whyte 4-4-0  • UIC 2′B n2 or 2′B h2 Gauge 4 ft 8+1⁄2 in (1,435 mm) Driver dia. 6 ft 9 in (2.057 m) Loco weight 59.15 long tons (60.10 t) Boiler pressure 175 psi (1.21 MPa) Cylinders Two Cylinder size 19 in × 26 in (483 mm × 660 mm) or 20+1⁄2 in × 26 in (521 mm × 660 mm) Valve gear Joy
Performance figures Tractive effort 18,222 lbf (81.1 kN) or 20,640 lbf (91.8 kN)
Career Operators London and North Western Railway → London, Midland and Scottish Railway → British Railways Power class LMS: 2P, 3P Number in class 1 January 1923: 130 1 January 1948: 1 Withdrawn 1927–1949 Disposition All scrapped

The London and North Western Railway (LNWR) "Precursor" Class was a type of 4-4-0 ("American") steam locomotive designed by the company's Chief Mechanical Engineer, George Whale.^[1][2] Introduced in 1904, it should not be confused with the LNWR 2-4-0 "Precursor" Class of 1874 designed by Francis Webb, the last example of which was scrapped in 1895.^[3] In 1906, a 4-4-2T ("Atlantic") tank variant of Webb's engine, the "Precursor Tank" Class, also entered service.^[4]

History

The Precursor Class was essentially a larger version of the LNWR "Improved Precedent" Class, being Whale's first attempt at producing a locomotive which would remove the requirement for express trains to be double headed (then standard practice on the LNWR).^[5] 130 examples of the class were constructed at Crewe Works between March 1904 and August 1907,^[6] their introduction allowing Whale to phase out the unreliable compound locomotives favoured by his predecessor, Francis Webb.^[7][8][9] As built, they were saturated, although a small number were fitted with superheaters between February 1913 and September 1919.^[3]

Whilst the Precursors created issues for crews as some of the cab controls were difficult to operate or reach,^[11] they were generally successful in terms of operating performance.^[12] However, having apparently experienced difficulty keeping time on trials between Crewe and Carlisle, they were not used on heavier gradients such as the climb to Shap.^[a] A consequence of this was the introduction of an extended version of the Precursors, the 4-6-0 "Experiment" Class, in 1905.^[14] Nevertheless, double heading was still necessary on many trains north of Preston due to accelerated schedules and increased loads.^[15]

In 1919, the Precursors were developed by Whale's successor, Charles Bowen-Cooke, into the 4-4-0 superheated "George the Fifth" Class.^[5][16] The main visual difference was that the Precursors had separate splashers over each of the driving wheels while the Georges had combined splashers that covered both pairs.

The LNWR reused numbers and names from withdrawn locomotives, with the result that the numbering system was completely haphazard. Starting with the first of the class 513 "Precursor" in 1913, were given superheaters, the process continuing until just after grouping in 1923. Most of the superheated engines were also converted from having slide valves to piston valves.

This resulted in two main subclasses; saturated locomotives with 19 by 26 inches (480 mm × 660 mm) cylinders, and superheated locomotives with 20.5 by 26 inches (520 mm × 660 mm) cylinders. The LMS gave them the power classification 3P. The saturated engines were given the LMS numbers in the 5187–5266 series, though not all survived long enough to receive them. The superheated engines were given the LMS numbers 5270–5319 (5267–5269 were not used).

The LMS continued to superheat engines until 1926, these rebuilds retained their LMS number. Also, three superheated engines became saturated via boiler swaps.

Withdrawals of the saturated engines started in 1927 and the last engine in as built condition was withdrawn in 1935. The four superheated engines which retained slide valves were withdrawn from 1931 to 1936. Withdrawals of the superheated engines with piston valves began in 1935. Those not withdrawn had 20000 added to their numbers from 1934 to 1937 to make room for Black Fives.

By the outbreak of the Second World War in September 1939, only 11 Precursors were still in service.^[3][17] A single example, 25297 "Sirocco", was inherited by British Railways in 1948, but this was withdrawn in June 1949 before the number it had been allocated (58010) could be applied.^[18][19]

None were preserved.

Accidents

Great Bridgeford

On 17 June 1932, locomotive number 5278 Precursor was hauling the 7:23 p.m. Crewe to Stafford and Birmingham New Street express passenger service when, at around 7:52 p.m., the engine and all four coaches derailed just to the south of Great Bridgeford station, Staffordshire.

Of the 70 to 80 passengers on board the train, three were killed immediately and a fourth died in hospital the next day. Together with the driver and fireman, 9 passengers received injuries serious enough to require hospital care, whilst a further 18 were treated at the scene and able to continue their journeys.^[20][21]

Fleet list

See also

• Locomotives of the London and North Western Railway

Notes

References

Sources

• Casserley, H. C. & Johnston, Stuart W. (1974) [1966]. Locomotives at the Grouping 3: London, Midland and Scottish Railway. Shepperton, Surrey: Ian Allan. pp. 62–64. ISBN 0-7110-0554-0.

Wikimedia Commons has media related to LNWR Whale Precursor class.

This page was last edited on 5 April 2024, at 20:30