To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

From Wikipedia, the free encyclopedia

Diagram showing knee-wall used in timber roof construction which has no structural function

A knee wall is a short wall, typically under three feet (one metre) in height, used to support the rafters in timber roof construction. In his book A Visual Dictionary of Architecture, Francis D. K. Ching defines a knee wall as "a short wall supporting rafters at some intermediate position along their length."[1] The knee wall provides support to rafters which therefore need not be large enough to span from the ridge to the eaves. Typically the knee wall is covered with plaster or gypsum board.

The term is derived from the association with a human knee, partly bent. Knee walls are common in houses in which the ceiling on the top floor is an attic, i.e. the ceiling is the underside of the roof and slopes down on one or more sides.

YouTube Encyclopedic

  • 1/3
    Views:
    2 419
    19 682
    2 639
  • Pointless knee wall insulation - not touching the drywall
  • Knee to wall test
  • Proper Knee Wall Blocking

Transcription

Jamb height

Since there is no legal definition of the jamb height, further specifications are required as to how it is to be measured. It is generally accepted that the knee wall begins at the upper edge of the soffit of the floor below. There is no uniform use of the term for the end of the knee stick. In the greatest extent of the knee wall, this extends to the imaginary intersection of the outer wall with the upper edge of the rafter. The smallest dimension is when the knee wall is understood to mean only the wall that goes beyond the attic ceiling (excluding the base purlin). Between these possibilities, other methods of measurement are in use.[2]

See also

  • Sleeper wall – a short wall used to support floor joists of a ground floor

References

  1. ^ Ching, Francis D. K. (1995). A Visual Dictionary of Architecture. New York: Van Nostrand Reinhold. p. 211. ISBN 0-442-00904-6.
  2. ^ "§ 8 Häufige Fragen zu den drei Rechtsgebieten", Basiswissen Jura für die mündlichen Prüfungen, DE GRUYTER, pp. 57–77, 2013-04-25, doi:10.1515/9783110315554.57, ISBN 978-3-11-031554-7, retrieved 2022-03-26


This page was last edited on 12 March 2023, at 01:22
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.