| Keiler | |
|---|---|
 A Keiler, displayed with its mine flail deployed (2005) | |
| Type | Mine flail |
| Place of origin | Germany |
| Production history | |
| Produced | 1997-1998 |
| Specifications | |
| Mass | 53 tonnes (52 long tons) |
| Length | 10.7 m (35 ft 1 in) |
| Width | 6.35 m (20 ft 10 in) |
| Height | 3.76 m (12 ft 4 in) |
| Crew | 2 |
| Engine | MTU MB 871 Ka 501 986 hp |
| Suspension | torsion-bar |
Operational range | 600 km (370 mi) |
| Maximum speed | 50 km/h (31 mph) |
Keiler mine flail (German: Minenräumpanzer Keiler, 'tusker') is a mine-clearing vehicle developed by Rheinmetall in Germany to meet the requirements of the German Army. It is a conversion of the M48 Patton medium tank chassis in combination with a German MTU MB 871 Ka 501 liquid-cooled turbocharged Diesel engine. The main role of the Keiler vehicle is to clear a lane through minefields to ensure the safe passage of soldiers and vehicles.[1] A deployable mine flail system has been fixed to the front of the vehicle, which is used to clear both anti-tank and anti-personnel mines. Between 1997 and 1998, 24 vehicles of this kind were produced for the German Army.[2]
YouTube Encyclopedic
-
1/3Views:152 65898 18437 160
-
Keiler Mine Flail Tank - Minefield Clearing Vehicle
-
MICLICs Blow Their Mines
-
M139 Volcano Mine System
Transcription
Design
Keiler is built on the M48 Patton medium tank hull. Developers removed the turret of the Patton and fitted the vehicle with a heavy-duty rotor-powered mine flail, a rapidly rotating cylinder mounted between two arms in front of the vehicle consisting of two shafts with 24 chains terminating in large metal "feet".[3] In traveling mode, the mine flail folds over the vehicle.
In common with other mine flails, the spinning cylinder swings the chains around, bringing the feet into contact with the ground, thus simulating the force exerted by a person or vehicle passing over the ground. If a flail strikes the ground above a buried mine, the impact will cause the mine to safely detonate. The vehicle can clear a lane 4.7 metres (15 ft) wide and 120 metres (390 ft) long in 10 minutes. An automatic system fixed on the rear of the hull marks the cleared lane.
The Keiler has no defensive weapons except its smoke grenade dischargers. The vehicle is operated by a crew of two (commander and driver).
Propulsion
The original engine of the M48 Patton has been replaced with a more powerful, German MTU MB 871 Ka 501 liquid-cooled turbocharged diesel engine. This develops 986 horsepower (735 kW) in traveling mode, and 1,092 horsepower (814 kW) when driving the mine flail. A Renk HSWL 284 M transmission was fitted. The Keiler uses the same Torsion bar suspension as the M48 Patton tank, and has 6 wheels on each side.[2]
Operators
References
- ^ "Keiler mine-clearing tank". rheinmetall-defence.
- ^ a b "keiler". military-today.com.
- ^ "The German M48A2 Keiler Engineering Vehicle". tanknutdave.com.
- ^ International Institute for Strategic Studies (2021). The Military Balance 2021. Routledge. p. 107. doi:10.4324/9781003177777. ISBN 978-1-03-201227-8. ISSN 0459-7222. S2CID 241415678.
This page was last edited on 28 June 2023, at 03:49