Junction box

Electrical installations
Wiring practice by region or country
North American practice United Kingdom practice
Regulation of electrical installations
BS 7671 UK wiring regulations IEC 60364 IEC international standard Canadian Electrical Code (CE Code) U.S. National Electrical Code (NEC)
Cabling and accessories
AC power plugs and sockets Cable tray Electrical conduit Mineral-insulated copper-clad cable Multiway switching Steel wire armoured cable Ring main unit Ring circuit Thermoplastic-sheathed cable
Switching and protection devices
AFCI ELCB Electrical busbar system Circuit breakers Disconnector Fuse Residual-current device Distribution board Consumer unit Electrical switch Earthing systems
v t e

An electrical junction box (also known as a "jbox") is an enclosure housing electrical connections.^[1] Junction boxes protect the electrical connections from the weather, as well as protecting people from accidental electric shocks.

YouTube Encyclopedic

1/3
Views:
120 342
31 186
17 877

Transcription

Functions of the junction box

A small metal or plastic junction box may form part of an electrical conduit or thermoplastic-sheathed cable (TPS) wiring system in a building. If designed for surface mounting, it is used mostly in ceilings, under floors or concealed behind an access panel—particularly in domestic or commercial buildings. An appropriate type (such as that shown in the gallery) may be buried in the plaster of a wall (although full concealment is no longer allowed by modern codes and standards) or cast into concrete—with only the cover visible.

It sometimes includes built-in terminals for the joining of wires.

A similar, usually wall mounted, container used mainly to accommodate switches, sockets and the associated connecting wiring is called a pattress.

The term junction box may also be used for a larger item, such as a piece of street furniture. In the UK, such items are often called a cabinet. See Enclosure (electrical).

Junction boxes form an integral part of a circuit protection system where circuit integrity has to be provided, as for emergency lighting or emergency power lines, or the wiring between a nuclear reactor and a control room. In such an installation, the fireproofing around the incoming or outgoing cables must also be extended to cover the junction box to prevent short circuits inside the box during an accidental fire.

Electrical junction box in the process of installation. Electrical conduits terminate at the sides and cables pass through or are joined inside the box.
A metal junction box
Australian Internal Surface Mounted Junction Box—showing wiring stages.
Swedish junction box in Kuhlo-style with lever-connector Wago 221, where ground and neutral are connected in common.