To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.

Jubilee Bridge (Stockton-on-Tees)

From Wikipedia, the free encyclopedia

Jubilee Bridge
Jubilee Bridge-from South bank-1-1280.jpg
Jubilee Bridge over the river Tees from west side
Coordinates54°32′5.4″N 1°19′14.5″W / 54.534833°N 1.320694°W / 54.534833; -1.320694
CarriesQueen Elizabeth Way
CrossesRiver Tees
LocaleBorough of Stockton-on-Tees, England, United Kingdom
Official nameJubilee Bridge
Preceded byPreston Pipe Bridge
Followed bySurtees Bridge
DesignBalanced cantilever
MaterialReinforced concrete and T-section steel plate girders
Total length150 metres (492 ft)
Longest span106 metres (348 ft)
No. of spans3
Piers in water2
Constructed byBirse Construction Ltd.
Fabrication byCleveland Bridge & Engineering Company
Construction end2002
Opened20 April 2002

The Jubilee Bridge is a road and pedestrian/cycle bridge carrying the Queen Elizabeth Way north-south across the River Tees linking Stockton-on-Tees with nearby Ingleby Barwick in the borough of Stockton-on-Tees in the north-east of England.[1][2] The bridge is over 3.1 miles (5 km) upriver from, and over 1.9 miles (3 km) approximately south of Stockton town centre.[citation needed]


The Jubilee Bridge is a balanced cantilever design, 150 m long with 3 spans and a main span of 106 m.[1][2] It is constructed from reinforced concrete and T-section steel plate girders.[3] It carries dual two lane carriageways and additionally on the western side, a pedestrian cycle track linking in to the local pedestrian cycle tracks on the southern bank of the River Tees.[4]

The piers are supported on 914 mm concrete-filled tubular steel piles and the abutments are supported by steel 'H' piles.[2]

A view from the southern embankment.
A view from the southern embankment.


The bridge was built by Birse Construction Ltd with steel fabrication supplied by Cleveland Bridge & Engineering Company of Darlington.[2]


The bridge was opened on 20 April 2002.[1][2]


  1. ^ a b c "Jubilee Bridge". Bridges on the Tyne. Retrieved 17 July 2010. CS1 maint: discouraged parameter (link)
  2. ^ a b c d e "Bridges over the Tees" (PDF). Retrieved 16 July 2012. CS1 maint: discouraged parameter (link)
  3. ^ Janberg, Nicolas. "Jubilee Bridge". Structurae. Retrieved 16 July 2012. CS1 maint: discouraged parameter (link)
  4. ^ "View Cabinet Decision Record". Stockton-on-Tees Borough Council. 28 April 2008. Retrieved 17 July 2010. CS1 maint: discouraged parameter (link)

External links

This page was last edited on 7 November 2020, at 21:55
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.