 1-Pentene
| |
 cis-2-Pentene
| |
 trans-2-Pentene
| |
| Names | |
|---|---|
| IUPAC names
Pent-1-ene
cis-Pent-2-ene trans-Pent-2-ene | |
| Other names
amylene, n-amylene, n-pentene, beta-n-amylene, sym-methylethylethylene, pentylene
| |
| Identifiers | |
3D model (JSmol)
|
|
| ChemSpider | |
| ECHA InfoCard | 100.042.636 |
| EC Number |
|
PubChem CID
|
|
| UNII |
|
CompTox Dashboard (EPA)
|
|
| |
| |
| Properties | |
| C5H10 | |
| Molar mass | 70.135 g·mol−1 |
| Density | 0.64 g/cm3 (1-pentene)[1] |
| Melting point | −165.2 °C (−265.4 °F; 108.0 K) (1-pentene)[1] |
| Boiling point | 30 °C (86 °F; 303 K) (1-pentene)[1] |
| -53.7·10−6 cm3/mol | |
| Hazards | |
| Safety data sheet (SDS) | MSDS |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
Pentenes (also called Pentylenes) are alkenes with the chemical formula C
5H
10. Each molecule contains one double bond within its molecular structure. Six different compounds are in this class, differing from each other by whether the carbon atoms are attached linearly or in a branched structure and whether the double bond has a cis or trans form.
YouTube Encyclopedic
-
1/5Views:1 0236 21415 315890208 102
-
How to write the formula of pentene | pentene | pentene formula| Molecular formula of pentene
-
How to Write the Formula for Pentane
-
How to Balance C5H10 + O2 = CO2 + H2O (Pentene + Oxygen gas)
-
draw the product of the hydrogenation of cis 2 pentene draw all hydrogen atoms
-
Halogenation of Alkenes - Reaction Mechanism for Bromination and Chlorination
Transcription
Straight-chain isomers
1-Pentene is an alpha-olefin. Most often, 1-pentene is made as a byproduct of catalytic or thermal cracking of petroleum or during the production of ethylene and propylene via thermal cracking of hydrocarbon fractions.
The only commercial manufacturer of 1-pentene is Sasol Ltd., where it is separated from crude by the Fischer-Tropsch process.[2]
2-Pentene has two geometric isomers: cis-2-pentene and trans-2-pentene. Cis-2-Pentene is used in olefin metathesis.
Branched-chain isomers
The branched isomers are 2-methylbut-1-ene, 3-methylbut-1-ene (isopentene), and 2-methylbut-2-ene (isoamylene).
Isoamylene is one of the three main byproducts of deep catalytic cracking (DCC), which is very similar to the operation of fluid catalytic cracking (FCC). The DCC uses vacuum gas oil (VGO) as a feedstock to produce primarily propylene, isobutylene, and isoamylene. The rise in demand for polypropylene has encouraged the growth of the DCC, which is operated very much like the FCC. Isobutylene and isoamylene feedstocks are necessary for the production of the much debated gasoline blending components methyl tert-butyl ether and tert-amyl methyl ether.
Production of fuels
Propylene, isobutene, and amylenes are feedstocks in the alkylation units of refineries. Using isobutane, blendstocks are generated with high branching for good combustion characteristics. Amylenes are valued as precursors to fuels, especially aviation fuels of relatively low volatility, as required by various regulations.[3]
References
- ^ a b c Record in the GESTIS Substance Database of the Institute for Occupational Safety and Health
- ^ "RSA Olefins | cChange". www.cchange.ac.za. Retrieved 2017-10-19.
- ^ Bipin V. Vora; Joseph A. Kocal; Paul T. Barger; Robert J. Schmidt; James A. Johnson (2003). "Alkylation". Kirk‐Othmer Encyclopedia of Chemical Technology. doi:10.1002/0471238961.0112112508011313.a01.pub2. ISBN 0-471-23896-1.
This page was last edited on 28 September 2023, at 13:21