To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.

Hybrid vehicle drivetrain

From Wikipedia, the free encyclopedia

Hybrid vehicle drivetrains transmit power to the driving wheels for hybrid vehicles. A hybrid vehicle has multiple forms of motive power.

Hybrids come in many configurations. For example, a hybrid may receive its energy by burning gasoline, but switch between an electric motor and a combustion engine.

Electrical vehicles have a long history combining internal combustion and electrical transmission – as in a diesel–electric power-train – although they have mostly been used for rail locomotives. A diesel–electric powertrain fails the definition of hybrid because the electric drive transmission directly replaces the mechanical transmission rather than being a supplementary source of motive power. One of the earliest forms of hybrid land vehicle was the 'trackless' trolleybus experiment in The United States (New Jersey) that ran from 1935 to 1948, which normally used traction current delivered by wire. The trolleybus was fitted with an internal combustion engine (ICE) to power the mechanical drivetrain directly, not to generate electricity for the traction motor. This enabled the vehicle to be used for revenue service where there was no contact wire. Since the 1990s trolleybus hybrids have been introduced with small power plants to provide a low speed capability for emergency and maintenance but not to support general revenue service.

The powertrain includes all of the components used to transform stored potential energy. Powertrains may either use chemical, solar, nuclear or kinetic and make them useful for propulsion. The oldest example is the steam locomotive. A common modern example is the electric bicycle. Hybrid electric vehicles combine a battery or supercapacitor supplemented by an ICE that can recharge the batteries or power the vehicle. Other hybrid powertrains use flywheels to store energy.

Among the different types of hybrid vehicles, only the electric/ICE type was commercially available as of 2017. One variety operated in parallel to provide power from both motors simultaneously. Another operated in series with one source exclusively providing the power and the second providing electricity. Either source may provide the primary motive force, with the other augmenting the primary.

Other combinations offer efficiency gains from superior energy management and regeneration that are offset by expense, complexity and the battery limitations. Combustion-electric (CE) hybrids have battery packs with far larger capacity than a combustion-only vehicle. A combustion-electric hybrid has batteries that are light that offer higher energy density that are far more costly. ICEs require only a battery large enough to operate the electrical system and ignite the engine.[1]

YouTube Encyclopedic

  • 1/5
    1 257
    350 966
    53 982
    2 220 332
    1 013 841
  • Hybrid Electric Vehicle | Understanding Hybrid Electric Vehicle Drivetrain
  • Hybrid Electric Vehicle Technology and Types of Electric Vehicles Explained
  • How a hybrid drivetrain works - in under a minute
  • How an Electric Car Works? Its Parts & Functions [Explained]
  • Hybrid System Technology


Types by design

Parallel hybrid

Structure of a parallel hybrid electric vehicle. The grey squares represent differential gears.

Parallel hybrid systems have both an internal combustion engine and an electric motor that can both individually drive the car or both coupled up jointly giving drive. This is the most common hybrid system as of 2016.

If they are joined at an axis (in parallel), the speeds at this axis must be identical and the supplied torques will add together (most electric bicycles are of this type). When only one of the two sources is in use, the other must be connected via a one-way clutch or freewheel so it can rotate freely.

With cars the two sources may be applied to the same shaft (for example with the electric motor connected between the engine and transmission), turning at equal speeds and the torques adding up with the electric motor adding or subtracting torque to the system as necessary. (The first two generations of Honda Insight use this system.)

Parallel hybrids can be further categorized by the balance between the different motors are at providing motive power: the ICE may be dominant (engaging the electric motor only in specific circumstances) or vice versa; while in others can run on the electric system alone but because current parallel hybrids are unable to provide electric-only or internal combustion-only modes they are often categorized as mild hybrids (see below).

Parallel hybrids rely more on regenerative braking and the ICE can also act as a generator for supplemental recharging. This makes them more efficient in urban 'stop-and-go' conditions. They use a smaller battery pack than other hybrids. Honda's early Insight, Civic, and Accord hybrids using IMA are examples of production parallel hybrids.[2] General Motors Parallel Hybrid Truck (PHT) and BAS Hybrids such as the Saturn Vue and Aura Greenline and Chevrolet Malibu hybrids also employ a parallel hybrid architecture.

Through the Road (TTR) hybrid

An alternative parallel hybrid is the "through the road" type.[3][4] In this system a conventional drivetrain powers one axle, with an electric motor or motors driving another. This arrangement was used by the earliest 'off track' trolleybuses. It in effect provides a complete backup power train. In modern motors batteries can be recharged through regenerative braking or by loading the electrically driven wheels during cruise. This allows a simpler approach to power-management. This layout also has the advantage of providing four-wheel-drive in some conditions. (An example of this principle is a bicycle fitted with a front hub motor, which assists the cyclist's pedal power at the rear wheel.) Vehicles of this type include the Audi 100 Duo II and Subaru VIZIV concept cars, Peugeot 3008, Peugeot 508, 508 RXH, Citroën DS5 (all using PSA's HYbrid4 system), the Volvo V60 plug-in hybrid, the BMW 2 Series Active Tourer, BMW i8 and the second generation Honda NSX.

Series hybrid

Structure of a series-hybrid vehicle. The grey square represents a differential gear. An alternative arrangement (not shown) is to have electric motors at two or four wheels.

Series hybrids are also referred to as extended-range electric vehicles (EREV)[5] or range-extended electric vehicles (REEV), or electric vehicle with extended range (EVER). All series hybrids are EREV, REEV or EVER, but not all EREV, REEV or EVER are series hybrids. Series hybrids with particular characteristics are classified as range-extended battery-electric vehicle (BEVx) by the California Air Resources Board.[6]

Electric transmission has been available as an alternative to conventional mechanical transmissions since 1903. Typically mechanical transmissions impose many penalties, including weight, bulk, noise, cost, complexity and a drain on engine power with every gear-change, whether accomplished manually or automatically. Unlike ICEs, electric motors do not require a transmission.

In effect the entire mechanical transmission between the ICE and the wheels is removed and replaced by an electric generator, some cable and controls, and electric traction motors, with the benefit that the ICE is no longer directly connected to the demand.

This is a series-hybrid arrangement and is common in diesel–electric locomotives and ships (the Russian river ship Vandal, launched in 1903, was the world's first diesel-powered and diesel–electric powered vessel) and Ferdinand Porsche successfully used this arrangement in the early 20th century in racing cars, including the Lohner–Porsche Mixte Hybrid. Porsche named the system System Mixte, which had a wheel hub motor arrangement, with a motor in each of the two front wheels, setting speed records.

The Chevrolet Volt operates primarily as a series hybrid.

The arguments of greater flexibility, higher efficiency and less emissions at the point of use are achieved in a series-hybrid system for road vehicles when an intermediate electric battery, acting as an energy buffer, sits between the electric generator and the electric traction motors.

The ICE turns a generator and is not mechanically connected to the driving wheels. This isolates the engine from demand, allowing it to consistently operate at its most efficient speed. Since the primary motive power is generated by the battery, a smaller generator/engine can be fitted as compared to a conventional direct drive engine. Electric traction motors can receive electricity from the battery, or directly from the engine/generator or both. Traction motors frequently are powered only by the electric battery, which can be charged from external sources such as the electricity grid.

This allows a vehicle with an engine/generator that only operates when needed, such as when the battery is depleted, or to charge the batteries. Vehicles of this type include Nissan's e-Power line (Note,[7] Serena,[8] Kicks,[9] X-Trail,[10] and Qashqai)[11] using a petrol engine to drive a generator and the EM57 traction motor;[12] Mazda's MX-30, when equipped with a rotary engine/generator range extender;[13] ThunderVolt hybrid transit buses integrated by ISE Corporation;[14] and transit buses fitted with BAE Systems (formerly Lockheed Martin) HybriDrive powertrains.[15][16]

Electric traction motors

Electric motors are more efficient than ICEs, with high power-to-weight ratios providing torque over a wide speed range. ICEs are most efficient when turning at a constant speed.

ICEs can run optimally when turning a generator. Series-hybrid systems offer smoother acceleration by avoiding gear changes. Series-hybrids incorporate:

  • Electric traction only – using only electric motors to turn the wheels.
  • ICE – turns only a generator.
  • Generator – turned by the ICE to generate electricity and start the engine.
  • Battery – energy buffer.
  • Regenerative braking – The drive motor becomes a generator and recovers energy by converting kinetic to electrical energy, also slowing the vehicle and preventing thermal losses.

In addition:

  • May be plugged into the grid to recharge the battery.
  • Supercapacitors assist the battery and recover most energy from braking.

In detail

The electric motor may be entirely fed by electricity from the battery or via the generator turned by the ICE, or both. Such a vehicle conceptually resembles a diesel–electric locomotive with the addition of a battery that may power the vehicle without running the ICE and acting as an energy buffer that is used to accelerate and achieve greater speed; the generator may simultaneously charge the battery and power the electric motor that moves the vehicle.

When the vehicle is stopped the ICE is switched off without idling, while the battery provides whatever power is needed at rest. Vehicles at traffic lights, or in slow moving stop-start traffic need not burn fuel when stationary or moving slowly, reducing emissions.

Series-hybrids can be fitted with a supercapacitor or a flywheel to store regenerative braking energy, which can improve efficiency by recovering energy otherwise lost as heat through the braking system. Because a series-hybrid has no mechanical link between the ICE and the wheels, the engine can run at a constant and efficient rate regardless of vehicle speed, achieving higher efficiency (37%, rather than the ICE average of 20%[17]) and at low or mixed speeds this could result in ~50% increase in overall efficiency (19% vs 29%).

Lotus offered an engine/generator set design that runs at two speeds, giving 15 kW of electrical power at 1,500 rpm and 35 kW at 3,500 rpm via the integrated electrical generator,[18] used in the Nissan concept Infiniti Emerg-e.

This operating profile allows greater scope for alternative engine designs, such as a microturbine,[19] rotary Atkinson cycle engine or linear combustion engine.[20]

The ICE is matched to the electric engine by comparing the output rates at cruising speed. Generally, output rates for combustion engines are provided for instantaneous (peak) output rates,[21] but in practice these can't be used.

The use of an electric motor driving a wheel directly eliminates the conventional mechanical transmission elements: gearbox, transmission shafts and differential, and can sometimes eliminate flexible couplings.

In 1997, Toyota released the first series-hybrid bus sold in Japan.[22] Designline International of Ashburton, New Zealand produces city buses with a microturbine powered series-hybrid system. Wrightbus produces series hybrid buses including the Gemini 2 and New Routemaster. Supercapacitors combined with a lithium ion battery bank have been used by AFS Trinity in a converted Saturn Vue SUV vehicle. Using supercapacitors they claim up to 150 mpg in a series-hybrid arrangement.[23]

Well known automotive series hybrid models include the variant of the BMW i3 that is equipped with a range extender. Another example of a series hybrid automobile is the Fisker Karma. The Chevrolet Volt is almost a series hybrid, but also includes a mechanical link from the engine to the wheels above 70 mph.[24][25]

Series-hybrids have been taken up by the aircraft industry. The DA36 E-Star, an aircraft designed by Siemens, Diamond Aircraft and EADS, employs a series hybrid powertrain with the propeller turned by a Siemens 70 kW (94 hp) electric motor. A power sapping propeller speed reduction unit is eliminated. The aim is to reduce fuel consumption and emissions by up to 25 percent. An onboard 40 hp (30 kW) Austro Engine Wankel rotary engine and generator provides the electricity.

The Wankel was chosen because of its small size, low weight and great power to weight ratio. (Wankel engines also run efficiently at a constant speed of approximately 2,000 RPM which is suited to generator operation. Keeping to a constant/narrow band offsets many of the perceived disadvantages of the Wankel engine in automotive applications.[26])

The electric propeller motor uses electricity stored in batteries, with the engines not operating, to take off and climb reducing sound emissions. The powertrain reduces the weight of the plane by 100 kilos relative to its predecessor. The DA36 E-Star first flew in June 2013, making this the first ever flight of a series hybrid powertrain. Diamond Aircraft state that the technology is scalable to a 100-seat aircraft.[27][28]

In-wheel motors

If the motors are attached to the vehicle body, flexible couplings are required but not if the traction motors are integrated into the wheels. One disadvantage is that the unsprung mass increases and suspension responsiveness decreases, which impacts ride and potentially safety. However the impact should be minimal as electric motors in wheel hubs such as Hi-Pa Drive, may be very small and light having exceptionally high power-to-weight ratios and braking mechanisms can be lighter as the wheel motors brake the vehicle.

Advantages of individual wheel motors include simplified traction control, all wheel drive if required and a lower floor (useful for buses and other specialised vehicles (some 8x8 all-wheel drive military vehicles use individual wheel motors). Diesel–electric locomotives have used this concept (individual motors driving axles of each pair of wheels) for 70 years.[29][full citation needed]

Other measures include lightweight aluminium wheels to reduce the unsprung mass of the wheel assembly; vehicle designs may be optimized to lower the centre of gravity by locating heavier elements (including battery) at floor level; In a typical road vehicle the power-transmission setup may be smaller and lighter than the equivalent conventional mechanical power-transmission setup, liberating space; the combustion generator set only requires cables to the driving electric motors, increasing flexibility in major component layout spread across a vehicle giving superior weight distribution and maximizing vehicle cabin space and opening up the possibility of superior vehicle designs exploiting this flexibility.

Power-split or series-parallel hybrid

Structure of a combined hybrid electric vehicle

Power-split hybrid or series-parallel hybrid are parallel hybrids that incorporate power-split devices, allowing for power paths from the ICE to the wheels that can be either mechanical or electrical. The main principle is to decouple the power supplied by the primary source from the power demanded by the driver.

ICE torque output is minimal at lower RPMs and conventional vehicles increase engine size to meet market requirements for acceptable initial acceleration. The larger engine has more power than needed for cruising. Electric motors produce full torque at standstill and are well-suited to complement ICE torque deficiency at low RPMs. In a power-split hybrid, a smaller, less flexible, and more efficient engine can be used. The conventional Otto cycle (higher power density, more low-RPM torque, lower fuel efficiency) is often modified to an Atkinson cycle or Miller cycle (lower power density, less low-rpm torque, higher fuel efficiency; sometimes called an Atkinson-Miller cycle). The smaller engine, using a more efficient cycle and often operating in the favorable region of the brake specific fuel consumption map, significantly contributes to the higher overall efficiency of the vehicle.

Interesting variations of the simple design (pictured at right) found, for example, in the well-known Toyota Prius are the:

  • fixed-ratio second planetary gearset as used in the Lexus RX400h and Toyota Highlander Hybrid. This allows for a motor with less torque but higher power (and higher maximum rotary speed), i.e. higher power density
  • Ravigneaux[30]-type planetary gear (planetary gear with 4 shafts instead of 3) and two clutches as used in the Lexus GS450h. By switching the clutches, the gear ratio from MG2 (the traction motor) to the wheel shaft is switched, either for higher torque or higher speed (up to 250 km/h / 155 mph) while sustaining better transmission efficiency. This is effectively accomplished in the Generation 3 Prius HSDs (Prius v, Prius Plug-in and Prius c), although the Generation 3 HSD has this second planetary gear set fixed at 2.5:1, rather than switching between 1:1 and 2.5:1 as the "carrier" is held fixed.
Power-splitter series-hybrid Toyota Prius

The Toyota Hybrid System THS / Hybrid Synergy Drive has a single power-split device (incorporated as a single three-shaft planetary gearset) and can be classified as an Input-Split, since the power of the engine is split at the input to the transmission. This in turn makes this setup very simple in mechanical terms, but has drawbacks of its own. For example, in Generation 1 and Generation 2 HSDs maximum speed is mainly limited by the speed of the smaller electric motor (often functioning as a generator). The Generation 3 HSD separates the ICE-MG1 path from the MG2 path, each with its own, tailored gear ratio (1.1:1 and 2.5:1, respectively, for late Priuses, including the Prius c). The Generation 4 HSD eliminates the second planetary gear set, and places the electric motors on parallel axes, with a combining gear in between these axes, and transfers the combined result to the final drive differential. This is quite similar to Toyota-affiliated Aisin Seiki's hybrid system, and saves significant space.

Early Hybrid Synergy Drive. Generation 1/Generation 2 (chained) ICE-MG1-MG2 Power Split Device HSD is shown. MG2 ratio permanently set at 1:1.
Late Hybrid Synergy Drive. Generation 3 (chainless) ICE-MG1 Power Split Device/MG2 Motor Speed Reduction Device HSD is shown. MG2 ratio permanently set at 2.5:1.

General Motors, BMW, and DaimlerChrysler collaborated on a system named "Two-Mode Hybrid" as part of the Global Hybrid Cooperation. The technology was released in the fall of 2007 on the Chevrolet Tahoe Hybrid. The system was also featured on the GMC Graphite SUV concept vehicle at the 2005 North American International Auto Show in Detroit.[32] BYD Auto's F3DM sedan is a series-parallel plug-in hybrid automobile, which went on sale in China in 2008.[33][34][35]

The Two-Mode Hybrid name highlights the drive-train's ability to operate in all-electric (Mode 1, or Input-Split) as well as hybrid (Mode 2, or Compound-Split) modes. The design allows for operation in more than two modes. Two power-split modes are available, along with several fixed-gear (essentially parallel hybrid) regimes. Such a design can be referred to as a multi-regime design.[36] The Two-Mode Hybrid powertrain design can be classified as a compound-split design, since the addition of four clutches within the transmission allows for multiple configurations of engine power-splitting. In addition to the clutches, this transmission has a second planetary gearset. The objective of the design is to vary the percentage of mechanically vs. electrically transmitted power to cope both with low-speed and high-speed operating conditions. This enables smaller motors to do the job of larger motors when compared to single-mode systems, because the derived electrical peak power is proportional to the width of the continuous variation range. The four fixed gears enable the Two-Mode Hybrid to function like a conventional parallel hybrid under high continuous power regions such as sustained high speed cruising or trailer towing. Full electric boost is available in fixed-gear modes.[37]

Types by degree of hybridization

Type Start-stop system Regenerative braking
Electric boost
Charge-depleting mode Rechargeable Exhaust regeneration
Micro hybrid Yes No No No No
Mild hybrid Yes Yes No No No
Dual mild hybrid Yes Yes No No Yes
Full hybrid Yes Yes Yes No No
Dual full hybrid Yes Yes Yes No Yes
Plug-in hybrid Yes Yes Yes Yes No
Dual plug-in hybrid Yes Yes Yes Yes Yes

Dual hybrids

These contain two different energy recovery systems. This is a transversal categorization.

Micro hybrids

Micro hybrid is a general term given to vehicles that use some type of start-stop system to automatically shut off the engine when idling. Strictly speaking, micro hybrids are not real hybrid vehicles, because they do not rely on two different sources of power.[38]

Mild hybrids

Engine compartment of a 2006 GMC Sierra Hybrid

Mild hybrids are essentially conventional vehicles with some hybrid hardware, but with limited hybrid features. Typically, they are a parallel hybrid with start-stop and modest levels of engine-assist or regenerative braking. Mild hybrids generally cannot provide all-electric propulsion.

Mild hybrids like the General Motors 2004–2007 Parallel Hybrid Truck (PHT) and the Honda Eco-Assist hybrids are equipped with a three-phase electric motor mounted within the bell-housing between the engine and transmission, allowing the engine to be turned off whenever the truck is coasting, braking, or stopped, yet restart quickly to provide power. Accessories can continue to run on electrical power while the engine is off, and as in other hybrid designs, regenerative braking recaptures energy. The large electric motor spins up the engine to operating-speeds before injecting fuel.

The 2004–2007 Chevrolet Silverado PHT was a full-size pickup truck. Chevrolet was able to get a 10% efficiency improvement by shutting down and restarting the engine on demand and using regenerative braking. The electrical energy was used only to drive accessories such as power steering. The GM PHT used a 42 volt system via three 12 volt vented lead acid batteries connected in series (36V total) to supply the power needed for the startup motor, as well as to power the electronic accessories.

General Motors then introduced their BAS Hybrid system, another mild-hybrid implementation officially released on the 2007 Saturn Vue Green Line. Its "start-stop" functionality operates similarly to the Silverado, although via a belted connection to the motor/generator unit. However the GM BAS Hybrid System can also provide modest assist under acceleration and during steady driving, and captures energy during regenerative (blended) braking. BAS Hybrid offered as much as a 27% improvement in combined fuel efficiency in EPA testing of the 2009 Saturn VUE.[39] The system can also be found on the 2008–2009 Saturn Aura Green Line and the 2008–2010 Chevrolet Malibu hybrids.

Another way to offer start/stop is by employing a static start engine. Such an engine requires no starter motor, but employs sensors to determine the exact position of each piston, then precisely timing the injection and ignition of fuel to turn over the engine.[40]

Mild hybrids are sometimes called power-assist hybrids as they use the ICE for primary power, with a torque-boosting electric motor connected to a (largely) conventional power train. The electric motor is mounted between the engine and transmission. It is essentially a large starter motor that operates when the engine needs to be turned over and when the driver "steps on the gas" and requires extra power. The electric motor may also restart the combustion engine and shutting down the main engine at idle, while the enhanced battery system is used to power accessories.[citation needed] GM announced Buick LaCrosse and Buick Regal mild-hybrids dubbed Eassist.

Before 2015, Honda's hybrids, including the Insight, used this design, leveraging their expertise in small, efficient gasoline engines; their system is dubbed Integrated Motor Assist (IMA). IMA hybrids cannot provide propulsion on electric power alone. However, since the amount of electrical power needed is much smaller, system size is reduced.

Another variation is the Saturn Vue Green Line BAS Hybrid system that uses a smaller electric motor (mounted to the side of the engine) and battery pack than the Honda IMA, but functions similarly.

Another variation on this type is Mazda's e-4WD system, offered on the Mazda Demio sold in Japan.[41] This front-wheel drive vehicle has an electric motor that can drive the rear wheels when extra traction is needed. The system is disengaged in all other driving conditions, so it does not directly enhance performance or economy but allows the use of a smaller and more economical engine relative to total performance.

Ford has dubbed Honda's hybrids "mild" in their advertising for the Escape Hybrid, arguing that the Escape's full hybrid design is more efficient.

The Genesis G90 and Genesis GV80 Coupe offer mild hybrid options with an electric supercharger.[42][43]

Dual mild hybrids

These contain two different energy recovery systems.

The Mercedes-Benz C-Class (W206), Mercedes-AMG SL 43 (R232), the Mercedes-AMG CLE 53, and the petrol Mercedes C254/X254 have an electrically-assisted turbocharger/MGU-H.[44][45]

Full hybrids

Engine compartment of a 2006 Mercury Mariner Hybrid

A full hybrid, sometimes also called a strong hybrid, is a vehicle that can run on just the engine, the batteries, or a combination. The Toyota Prius, Toyota Camry Hybrid, Ford Escape Hybrid/Mercury Mariner Hybrid, Ford Fusion Hybrid/Lincoln MKZ Hybrid/Mercury Milan Hybrid, Ford C-Max Hybrid, Ford Maverick Hybrid, Kia Optima Hybrid, Toyota Sienna Hybrid, as well as the General Motors 2-mode hybrid trucks and SUVs, are examples of this type of hybridization as they can operate on battery power alone. A large, high-capacity battery provides battery-only operation. These vehicles have a split power path that allows more flexibility in the drivetrain by inter-converting mechanical and electrical power. To balance the forces from each portion, the vehicles use a differential-style linkage between the engine and motor connected to the head end of the transmission.

The Toyota brand name for this technology is Hybrid Synergy Drive, which is used in the Prius, the Highlander Hybrid SUV and the Camry Hybrid. A computer oversees system operation, determining how to mix the power sources. The Prius operations can be divided into six distinct regimes:–

Electric vehicle mode—The ICE is off and the battery powers the motor (or charges during regenerative braking). Used for idling when the battery state of charge (SOC) is high.
Cruise mode—The vehicle is cruising (i.e. not accelerating), and the ICE can meet the demand. The power from the engine is split between the mechanical path and the generator. The battery also powers the motor, whose power is summed mechanically with the engine. If the battery state-of-charge is low, part of the power from the generator charges the battery.
Overdrive mode—A portion of the rotational energy produces electricity, because the ICE's full power is not needed to maintain speed. This electrical energy is used to drive the sun gear in the direction opposite its usual rotation. The end result has the ring gear rotating faster than the engine, albeit at lower torque.
Battery charge mode—Also used for idling, except that in this case the battery state-of-charge is low and requires charging, which is provided by the engine and generator.
Power boost mode—Employed in situations where the engine cannot maintain the desired speed. The battery powers the motor to complement the engine power.
Negative split mode—The vehicle is cruising and the battery state-of-charge is high. The battery provides power to both the motor (to provide mechanical power) and to the generator. The generator converts this to mechanical energy that it directs towards the engine shaft, slowing it down (although not altering its torque output). The purpose of this engine "lugging" is to increase the fuel economy of the vehicle.

Dual full hybrids

These contain two different energy recovery systems.

An example of dual hybrids are Formula One cars. See Formula One engines#2014–2021 and Formula One engines#2022–2025.

Another one is the Porsche 919 Hybrid.

The Infiniti Project Black S was cancelled.

Plug-in hybrid

Chevrolet Volt charging

A plug-in hybrid electric vehicle (PHEV) has two defining characteristics. It:

  • Can be plugged into an electrical outlet to be charged.
  • Can travel powered only by the battery.

They are full hybrids, able to run on battery power. They offer greater battery capacity and the ability to recharge from the grid. They can be either parallel or series designs. They are also called gas-optional, or griddable hybrids. Their main benefit is that they can be gasoline-independent for significant distances, with the extended range of an ICE for longer trips. Electric Power Research Institute research found a lower total cost of ownership for PHEVs due to reduced service costs and gradually improving battery technology. The "well-to-wheel" efficiency and emissions of PHEVs compared to gasoline hybrids depends on the grid energy sources (the US grid is 30% coal; California's grid is primarily natural gas, hydroelectric power, and wind power).

Engine compartment of a BYD F3DM plug-in hybrid

Prototypes of PHEVs, with larger battery packs that can be recharged from the power grid, were built in the U.S., notably at Andy Frank's Hybrid Center[46] at University of California, Davis. One production PHEV, the Renault Kangoo, went on sale in France in 2003. DaimlerChrysler built PHEVs based on the Mercedes-Benz Sprinter van. Light Trucks are offered by Micro-Vett SPA[47] the so-called Daily Bimodale.

The California Cars Initiative converted the 2004 and newer Toyota Prius to become a prototype of what it calls PRIUS+. With the addition of 140 kg (300 lb) of lead–acid batteries, the PRIUS+ achieved roughly double the gasoline mileage of a standard Prius and could make trips of up to 16 kilometres (10 mi) using only electric power.[48]

Chinese battery manufacturer and automaker BYD Auto released the F3DM compact sedan to the Chinese fleet market on December 15, 2008,[49][50] later replaced by the BYD Qin plug-in hybrid.[51][52]

General Motors began deliveries of the Chevrolet Volt in the United States in December 2010,[5] and its sibling, the Opel Ampera, was released in Europe by early 2012.[53][54] As of November 2012, other plug-in hybrids available in several markets were the Fisker Karma, Toyota Prius Plug-in Hybrid and Ford C-Max Energi.

As of October 2012, the best selling PHEV is the Volt, with more than 33,000 units of the Volt/Ampera family sold worldwide since December 2010, led by US sales of 27,306,[55][56] followed by the Netherlands with 2,175 Amperas sold through October 2012.[57][58] The Prius Plug-in Hybrid had sold 21,600 units sold worldwide through October 2012, with US sales of 9,623 units, followed by Japan with 9,500 units.[56][59]

Dual plug-in hybrids

These contain two different energy recovery systems.

The Mercedes-AMG ONE is a plug-in dual hybrid.

The Mercedes-Benz C-Class (W206) and the Mercedes C254/X254 also have an electrically-assisted turbocharger/MGU-H.[60][45]

Types by power source

Electric-internal combustion engine hybrid

There are many ways to create an electric-Internal Combustion Engine (ICE) hybrid. The variety of electric-ICE designs can be differentiated by how the electric and combustion portions of the powertrain connect, at what times each portion is in operation, and what percent of the power is provided by each hybrid component. Two major categories are series hybrids and parallel hybrids, though parallel designs are most common today.

Most hybrids, no matter the specific type, use regenerative braking to recover energy when slowing down the vehicle. This simply involves driving a motor so it acts as a generator.

Many designs also shut off the internal combustion engine when it is not needed in order to save energy. That concept is not unique to hybrids; Subaru pioneered this feature in the early 1980s, and the Volkswagen Lupo 3L is one example of a conventional vehicle that shuts off its engine when at a stop. Some provision must be made, however, for accessories such as air conditioning which are normally driven by the engine. Furthermore, the lubrication systems of internal combustion engines are inherently least effective immediately after the engine starts; since it is upon startup that the majority of engine wear occurs, the frequent starting and stopping of such systems reduce the lifespan of the engine considerably.[dubiousdiscuss] Also, start and stop cycles may reduce the engine's ability to operate at its optimum temperature, thus reducing the engine's efficiency.

Structure of a fuel cell hybrid electric vehicle

Electric-fuel cell hybrid

Fuel cell vehicles are often fitted with a battery or supercapacitor to deliver peak acceleration power and to reduce the size and power constraints on the fuel cell (and thus its cost); this is effectively also a series hybrid configuration.

Internal combustion engine-hydraulic hybrid

Chrysler offers the Pacifica minivan as a plug-in hybrid

A hydraulic hybrid vehicle uses hydraulic and mechanical components instead of electrical. A variable displacement pump replaces the electric motor/generator. A hydraulic accumulator stores energy. The vessel typically carries a flexible bladder of pre-charged pressurized nitrogen gas. Pumped hydraulic fluid is compressed against the bladder storing the energy in the compressed nitrogen gas. Some versions have a piston in a cylinder rather than a pressurized bladder. The hydraulic accumulator is potentially cheaper and more durable than batteries. Hydraulic hybrid technology was originally implemented in Germany in the 1930s. Volvo Flygmotor used petro-hydraulic hybrids experimentally in buses from the early 1980s.

The initial concept involved a giant flywheel (see Gyrobus) for storage connected to a hydrostatic transmission. The system is under development by Eaton and several other companies, primarily in heavy vehicles like buses, trucks and military vehicles. An example is the Ford F-350 Mighty Tonka concept truck shown in 2002. It features an Eaton system that can accelerate the truck to highway speeds.

The system components were expensive, which precluded installation in smaller trucks and cars. A drawback was that the power motors were not efficient enough at part load. Focus switched to smaller vehicles. A British company, Artemis Intelligent Power, made a breakthrough by introducing an electronically controlled hydraulic motor/pump that is efficient at all ranges and loads, making small applications of petro-hydraulic hybrids feasible.[61] The company converted a BMW car to prove viability. The BMW 530i gave double the MPG in city driving compared to the standard car. The test used the standard 3,000 cc engine. Petro-hydraulic hybrids allows downsizing an engine to average power usage, not peak power usage. Peak power is provided by the energy stored in the accumulator.[62]

The kinetic braking energy recovery rate is higher and therefore the system is more efficient than 2013-era battery charged hybrids, demonstrating a 60% to 70% increase in economy in EPA testing.[63] In EPA tests a hydraulic hybrid Ford Expedition returned 32 mpg‑US (7.4 L/100 km) in urban driving and 22 mpg‑US (11 L/100 km) on the highway.[64]

One research company's goal was to create a fresh design to improve the packaging of gasoline-hydraulic hybrid components. All bulky hydraulic components were integrated into the chassis. One design claimed to reach 130mpg in tests by using a large hydraulic accumulator that is also the structural chassis. The hydraulic driving motors are incorporated within the wheel hubs and reversing to recover braking energy. The aim is 170 mpg in average driving conditions. Energy created by shock absorbers and kinetic braking energy, that normally would be wasted, assists in charging the accumulator. An ICE sized for average power use charges the accumulator. The accumulator is sized to run the car for 15 minutes when fully charged.[65][66][67]

In January 2011, Chrysler announced a partnership with the EPA to design and develop an experimental gasoline-hydraulic hybrid powertrain suitable for use in passenger cars. Chrysler adapted an existing production minivan to the powertrain.[68][69][70][71][72]

NRG Dynamix of the U.S.A. claimed its approach reduced cost by one-third compared with electric hybrids and added only 300 lbs (136 kg) to vehicle weight vs. 1,000 lbs (454 kg) for electric hybrids. The company claimed a standard pickup vehicle powered by a 2.3-litre, 4-cylinder engine achieved 14 mpg (16.8 L/100 km) in city driving. Using the petro-hydraulic setup fuel economy reached "the mid 20s".[73]

Internal combustion engine-pneumatic

Compressed air can power a hybrid car with a gasoline compressor to provide the power. Motor Development International in France was developing such air-powered cars. A team led by Tsu-Chin Tsao, a UCLA mechanical and aerospace engineering professor, collaborated with engineers from Ford to get pneumatic hybrid technology up and running. The system is similar to that of a hybrid-electric vehicle in that braking energy is harnessed and stored to assist the engine as needed during acceleration.

Human power-environmental power

Many land and water vehicles use human power combined with a further power source. Common are parallel hybrids, e.g. a sailboat with oars, motorized bicycles or a human-electric hybrid vehicle such as the Twike. Some series hybrids exist. Such vehicles can be tribrid vehicles, combining three power sources e.g. on-board solar cells, grid-charged batteries and pedals.

Hybrid vehicle operation modes

Hybrid vehicles can be used in different modes. The figure shows some typical modes for a parallel hybrid configuration.

Hybrid drivetrain topology

P stands for Position. If there are multiple electric motors in different locations, may be written as P1 + P3 or P0 + P2.5 + P4.

Location of electric motor(s) in drivetrain:

  • P0 - beside, inside or in front of engine
  • P1 - engine output shaft
  • P2 - between engine and transmission
  • P2.5 - inside transmission
  • P3 - transmission output shaft
  • P4 - rear axle
  • P5 - inside the wheel(s) or propeller(s)[74]

Aftermarket options

An aftermarket powertrain can be added to a vehicle.

The aftermarket solution is used when the user delivers glider (rolling chassis) and the hybrid (two engines) or all-electric (only an electric motor) powertrain kit to the automaker and receives the vehicle with the tech installed. An (electric or hybrid) powertrain can be added to a glider[75] by an aftermarket installer.

In 2013 a University of Central Florida design team, On the Green, worked to develop a bolt-on hybrid conversion kit to transform an older model vehicle into a gas-electric hybrid.[76]

A conversion of a 1966 Mustang was demonstrated by an engineer in California. The system replaced the alternator with a 12 kW (30 kW peak) brushless electric motor. Gas mileage and power improved.[77]

There are hub motors that can be fitted in the wheel[78] or between the wheel and brake rotor[79] of internal combustion vehicles to convert them to hybrid IWD.

See also


  1. ^ "DOE to Award Up to $2.4B for Advanced Batteries, Electric Drive Components, and Electric Drive Vehicle Demonstration/Deployment Projects". Green Car Congress. March 19, 2009.
  2. ^ "Hybrids Under the Hood (Part 2): Drivetrains". Hybrid Center (Union of Concerned Scientists). Archived from the original on 2010-01-11. Retrieved 2010-03-18.
  3. ^ "What do you mean when you say Through-The-Road-Hybrid (TTRH)?". Protean Electric. Retrieved July 15, 2014.
  4. ^ "Through-The-Road (TTR) Hybrid - Through-The-Roof Potential - 598" (PDF). Argonne National Laboratory. Retrieved July 15, 2014.
  5. ^ a b Matthe, Roland; Eberle, Ulrich (2014-01-01). "The Voltec System - Energy Storage and Electric Propulsion". Retrieved 2014-05-04.
  6. ^ "2014 BMW i3 Electric Car: Why California Set Range Requirements, Engine Limits". Green Car Reports. 23 October 2013. Retrieved 2015-11-22.
  7. ^ Edelstein, Stephen (December 7, 2020). "Nissan Note goes all-hybrid in Japan with revised e-Power system still due for the US". Green Car Reports. Retrieved 13 April 2021.
  8. ^ "Nissan introducing second non-plug-in e-POWER series-hybrid model: Serena e-POWER". Green Car Congress. October 24, 2017. Retrieved 13 April 2021.
  9. ^ Reyes, Alvin (May 18, 2020). "2021 Nissan Kicks e-Power EV debust with an onboard generator". Retrieved 13 April 2021.
  10. ^ Pappas, Thanos (July 20, 2022). "All-New Nissan X-Trail Debuts In Japan With Second-Gen e-POWER Hybrid Powertrain". Car. Retrieved 26 November 2023.
  11. ^ Scullion, Murray (February 18, 2021). "New Nissan Qashqai: your next family crossover, now with E-Power". Car. Retrieved 13 April 2021.
  12. ^ "e-POWER". Nissan Motor Corporation. Retrieved 13 April 2021.
  13. ^ Gitlin, Jonathan M. (April 14, 2021). "Mazda's electric MX-30 goes on sale in the US this fall". Ars Technica. Retrieved 14 April 2021.
  14. ^ "Information on Thundervolt ELFA hybrid-electric drive systems for buses and trucks". AltEnergyMag. April 2001. Retrieved 13 April 2021.
  15. ^ Grewe, T (May 17–21, 1998). HybriDrive Propulsion System: A cleaner, more efficient way to go!. The 1998 Bus Operations, Technology and Management Conference. Phoenix, Arizona: American Public Transportation System. Retrieved 13 April 2021.
  16. ^ "Lockheed Martin to deliver more diesel electric propulsion systems for New York City buses". DieselNet. January 13, 1999. Retrieved 13 April 2021.
  17. ^ "Improving IC Engine Efficiency". University of Washington: Energy & Environment – Autumn 2001. Retrieved April 18, 2013.
  18. ^ "Lotus to Introduce Range Extender Engine". Green Car Congress. September 7, 2009.
  19. ^ Neuman, William (October 11, 2007). "The turbine on the bus goes purr purr purr". New York Times.
  20. ^ Linear Combustion Engine Project  Archived 2010-06-06 at the Wayback Machine. Retrieved April 18, 2013.
  21. ^ "DIY Go Karts". DIY Go Karts. 5 February 2024.
  22. ^ "Toyota debuts power-hybrid bus". The Japan Times. August 22, 1997.
  23. ^ "AFS Trinity urgees Congress and candidates to support proposed auto stimulus package". AFS Trinity. September 24, 2008.
  24. ^ Wood, Colum (October 12, 2010). "GM Admits Chevy Volt's Gasoline Engine Can Power the Wheels; So is It Still Special?".
  25. ^ Webster, Larry (October 12, 2010). "GM Reveals the Volt's Hybrid Drive System". Popular Mechanics.
  26. ^ "Mazda stays loyal to rotary engines". The Daily Telegraph. London. September 18, 2012.
  27. ^ "Siemens, Diamond Aircraft, EADS unveil world's first serial hybrid aircraft". Autoblog. 2011-07-03. Retrieved 2011-07-03.
  28. ^ "EADS and Siemens enter long-term research partnership for electric aviation propulsion; MoU with Diamond Aircraft". 2013-06-18. Retrieved 2016-07-18.
  29. ^ Churella, 28-30
  30. ^ "Ravigneaux planetary gear set of carrier, sun, planet, and ring wheels with adjustable gear ratios and friction losses - Simulink". Retrieved 2012-08-01.
  31. ^ a b Krust, Matthias (July 14, 2009). "BMW, Daimler, GM hybrid alliance nears end". Automotive News.
  32. ^ "The GMC Graphyte — A hybrid SUV concept vehicle". GM - GMability Education 9-12: Fuel Cells & Energy. Archived from the original on January 16, 2006.
  33. ^ "New BYD Hybrid Gets Jump in Electric Car Wars in China". China Stakes. December 1, 2008.
  34. ^ Yoney, Domenick (April 13, 2009). "Chinese plug-in hybrid, BYD F3DM, has sold just 80 copies in four months". Autoblog Green.
  35. ^ Shirouzu, Norihko (October 13, 2008). "BYD to Launch Electric Car Sales in China Next Month". The Wall Street Journal. (subscription required)
  36. ^ Wishart, J.; Zhou, Y.; Dong, Z. (2008). "Review of multi-regime hybrid vehicle powertrain architecture". International Journal of Electric and Hybrid Vehicles. 1 (3): 248–275. doi:10.1504/IJEHV.2008.019900.
  37. ^ "Powerfully Efficient: GM Two-Mode Hybrid". General Motors. Archived from the original on February 25, 2009.
  38. ^ "Hybrid-electro Drives (terms)". Retrieved 13 April 2015.
  39. ^ "Compare Cars Side-by-Side". Retrieved 2012-08-01.
  40. ^ Kassakian, J.G (1996). "Automotive electrical systems circa 2005". IEEE Spectrum. 33 (8): 22–27. doi:10.1109/6.511737.
  41. ^ "Electric 4WD Model Added to Mazda Demio Series". 27 November 2003. Archived from the original on 9 January 2021.
  42. ^ "2023 Genesis G90 In US Getting Mild-Hybrid V6 With Electric Supercharger".
  43. ^ "Big Genesis GV80 SUV gets sporty GV80 Coupe variant, and a facelift". Auto Express.
  44. ^ "New 442bhp Mercedes-AMG CLE53: double turbos, six cylinders, all-wheel drive". CAR Magazine.
  45. ^ a b Perkins, Chris (2023-02-10). "How Electric Turbochargers Are Changing Internal Combustion".
  46. ^ "Team Fate". UC-Davis Hybrid Electric Vehicles Group.
  47. ^ "Hybrid Daily: Technical Data". Micro-Vett. Archived from the original on January 10, 2006.
  48. ^ "How We Green-Tuned an '04 Prius into a PRIUS+ Plug-In Hybrid!". CalCars. Retrieved April 18, 2013.
  49. ^ Crippen, Alex (December 15, 2008). "Warren Buffett's Electric Car Hits the Chinese Market, But Rollout Delayed For U.S. & Europe". CNBC.
  50. ^ Balfour, Frederik (December 15, 2008). "China's First Plug-In Hybrid Car Rolls Out" Archived 2008-12-20 at the Wayback Machine. Business Week.
  51. ^ Voelcker, John (April 20, 2012). "BYD Chin: World's First Plug-In Hybrid, Updated And Renamed". Green Car Reports.
  52. ^ Blanco, Sebastian (April 20, 2012). "BYD's Beijing Motor Show line-up includes Chin Dual Mode, remote-controlled F3". Autoblog Green.
  53. ^ Chambers, Nick (December 16, 2010). "First Chevy Volts Reach Customers, Will Out-Deliver Nissan in December".
  54. ^ "Opel Ampera: First Customers Take Delivery". Opel Europe. February 21, 2012.
  55. ^ Voelcker, John (August 1, 2012). "July Plug-In Electric Car Sales: Volt Steady, Leaf Lethargic (Again)". Green Car Reports.
  56. ^ a b Cole, Jay (November 1, 2012). "October 2012 Plug-In Electric Vehicle Sales Report Card". Inside EVs.
  57. ^ RAI (2012-06-04). "Autoverkopen mei 2012 dalen met 4,4 procent" [Car sales in May 2012 decreased by 4.4 percent] (in Dutch). RAI Vereniging. Archived from the original on 2014-03-28. Retrieved 2012-08-05. Download pdf file for detailed sales in 2011 and 2012 CYTD.
  58. ^ RAI (October 2012). "Verkoopcijfers oktober 2012 - Modellenoverzicht" [Sales October 2012 - Models overview] (in Dutch). Auto Week Netherlands. Archived from the original on 2012-11-05. Retrieved 2012-11-01. Table shows September and October 2012 sales.
  59. ^ "Cumulative Sales of TMC Hybrids Top 2 Million Units in Japan". Toyota. November 8, 2012. Archived from the original on November 11, 2012. Retrieved November 24, 2012.
  60. ^ Holger Wittich, Patrick Lang (2021-02-22). "Neue Mercedes C-Klasse (W206)". auto motor und sport.
  61. ^ "Our Technology". Artemis Intelligent Power. Archived from the original on July 29, 2013. Retrieved April 18, 2013.
  62. ^ "Applications – On-road". Artemis Intelligent Power. Archived from the original on May 25, 2015. Retrieved April 18, 2013.
  63. ^ "EPA Announces Partnership to Demonstrate World's First Full Hydraulic Hybrid Urban Delivery Vehicle" (PDF). EPA. February 2005. Retrieved April 18, 2013.
  64. ^ Vanzieleghem, Bruno (June 15, 2006). "Capturing the power of hydraulics". Autoblog Green.
  65. ^ Proefrock, Philip (March 25, 2010). "Hybrid Hydraulic Drive Vehicle Promises 170 MPG". Inhabitat.
  66. ^ Turpen, Aaron (February 15, 2012). "INGOCAR from Valentin Tech shatters the way we think about cars". Torque News.
  67. ^ "170 MPG Ingocar". Valentin Technologies, Inc. Archived from the original on April 21, 2013. Retrieved April 18, 2013.
  68. ^ Hanlon, Mike (January 26, 2011). "Chrysler announces development of hydraulic hybrid technology for cars". Gizmag.
  69. ^ "EPA and Chrysler to Take Latest Hybrid Technology from Lab to Street/Partnership to adapt fuel efficient technology". EPA. January 19, 2011.
  70. ^ "Hydraulic Hybrid Research". EPA. Retrieved April 18, 2013.
  71. ^ "Demonstration Vehicles". EPA. Retrieved April 18, 2013.
  72. ^ "Chrysler Group files S-1 for IPO; snapshot of R&D priorities; exploring a light-duty hydraulic hybrid". 2013-09-24. Retrieved 2016-07-18.
  73. ^ David C. Smith (2012-08-06). WardsAuto (ed.). "New Hydraulic Hybrid System Claims Big MPG Boost". Retrieved 2016-07-18.
  74. ^ "Energy Flow and Electric Drive Mode Efficiency Evaluation of Different Generations of Hybrid Vehicles under Diversified Urban Traffic Conditions" (PDF).
  75. ^ "Energy Storage Fuel Cell Vehicle Analysis: Preprint" (PDF). National Renewable Energy Laboratory. April 2005.
  76. ^ On the Green. Retrieved April 18, 2013.
  77. ^ How To Build A Hybrid Archived 2013-06-04 at the Wayback Machine. Retrieved April 18, 2013.
  78. ^ "EV FOR EVERYONE". ORBIS ELECTRIC (Copy). Retrieved 2024-03-20.
  79. ^ Reporter, Staff (2023-09-12). "RMIT student wins James Dyson Award for new electric motor retrofit solution". Australian Manufacturing Forum. Retrieved 2024-03-20.

External links

This page was last edited on 17 July 2024, at 04:19
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.