Honda knot

Honda knot
Names	Honda knot, Lariat loop, Bowstring knot
Category	Loop
Releasing	Non-jamming
Typical use	Lassos, stringing bows
ABoK	#227, #1024, #1127, #151

A honda knot is the loop knot commonly used in a lasso.^[1] Its round shape, especially when tied in stiff rope, helps it slide freely along the rope it is tied around. To tie, first place an overhand knot in the end of the rope. Then tie a second overhand knot, pass the running end of the rope through it, and tighten.

A lariat loop is similarly constructed but will not slip from the running end. To tie a lariat loop: first tie an overhand knot, then pinch it so that the running end slides freely back and forth. Pass the rope end through just that "free-sliding" loop, and tighten. The photograph at right displays a lariat loop, with an additional overhand knot acting as a stopper knot because the lariat loop can slip by way of the rope's end when tension is not applied to the running end. It can be quickly adjusted, but does not function exactly the same as a lasso knot, which makes it perhaps^{[weasel words]} safer.^{[citation needed]}

See also

• List of knots

References

This knot-related article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e

This page was last edited on 1 October 2021, at 03:27