The General Code of Operating Rules (GCOR) is a set of operating rules for railroads in the United States. The GCOR is used by Class I railroads west of Chicago, most of the Class II railroads, and many Short-line railroads.[1]
Some railroads in the northeast United States follow NORAC, while Canada and Mexico have their own set of operating rules that govern their railroad operations.[1]
YouTube Encyclopedic
-
1/3Views:815364443
-
e-Health News Show- Introduction to Operating Rules
-
WEBINAR: Nacha Operating Rules Update
-
IRS NET OPERATING LOSS DEDUCTION RULES: How to Write Everything Off and Lower Your Tax🔶TAXES S3•E80
Transcription
Overview
The GCOR rules are intended to enhance railroad safety. The rules cover employee responsibilities, signaling equipment, procedures for safe train movement, dealing with accidents and other topics that directly and indirectly affect railroad safety. Some railroads modify the GCOR rules to suit their specific operations.
The GCOR is supplemented by System Special Instructions, Timetables, Hazardous Materials Instructions, Air Brake and Train Handling Instructions, and General Orders. These documents are issued by each individual railroad. System Special instructions, Timetables, and General Order can modify or amend the General Code of Operating Rules. GCOR 1.3.2 states that General Orders replace any rule, special instruction, or regulation that conflicts with the general order.[2]
Some railroads will maintain what they call a "living rulebook." As amendments are released via general order or special instruction, they will update the specific page that was affected.[1] An example of this is the Union Pacific, which maintains a copy of the GCOR with page-by-page amendments.[3]
The current version of the GCOR is the Eighth Edition, effective April 1, 2020.[4]
Categories
The full set of GCOR rules is divided into 19 categories.
- General Responsibilities
- Railroad Radio and Communication Rules
- Section Reserved
- Timetables
- Signals and Their Use
- Movement of Trains and Engines
- Switching
- Switches
- Block System Rules
- Rules Applicable Only in Centralized Traffic Control (CTC)
- Rules Applicable in ACS, ATC and ATS Territories
- Rules Applicable Only in Automatic Train Stop (ATS) Territory
- Rules Applicable Only in Automatic Cab Signal System (ACS) Territory
- Rules Applicable Only Within Track Warrant Control (TWC) Limits
- Track Bulletin Rules
- Rules Applicable Only in Direct Traffic Control (DTC) Limits
- Rules Applicable Only in Automatic Train Control (ATC) Territory
- Rules Applicable Only in Positive Train Control (PTC) Territory
- Section Reserved
See also
References
- ^ a b c "The General Code of Operating Rules (GCOR)". Garden Railways Magazine. Kalmbach Media (which owns "Trains.com"). Retrieved 2023-05-17.
- ^ General Code of Operating Rules. 2015.
- ^ UPRR - General Code of Operating Rules (PDF) (Seventh, amended ed.). Union Pacific. 20 Apr 2023. Archived (PDF) from the original on 17 May 2023.
- ^ "Alaska Railroad hosts national GCOR committee" (PDF). All Aboard. Alaska Railroad: 3. August 2019. Retrieved 17 May 2023.
External links
- U S Department of Transportation - Compliance with Railroad Operating Rules and Corporate Culture Influences, October 1999
- General Code of Operating Rules, April 7, 2010
- General Code of Operating Rules, April 1, 2015
- General Code of Operating Rules, April 1, 2020
This page was last edited on 27 September 2023, at 05:19