To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

From Wikipedia, the free encyclopedia

Metric gauge block set, 112 pcs
Another set with 8 pcs, 125 mm - 500 mm
Trolley model

Gauge blocks (also known as gage blocks, Johansson gauges, slip gauges, or Jo blocks) are a system for producing precision lengths. The individual gauge block is a metal or ceramic block that has been precision ground and lapped to a specific thickness. Gauge blocks come in sets of blocks with a range of standard lengths. In use, the blocks are stacked to make up a desired length (or height).

Gauge blocks were invented in 1896 by Swedish machinist Carl Edvard Johansson.[1] They are used as a reference for the calibration of measuring equipment used in machine shops, such as micrometers, sine bars, calipers, and dial indicators (when used in an inspection role). Gauge blocks are the main means of length standardization used by industry.[1]

An important feature of gauge blocks is that they can be joined together with very little dimensional uncertainty. The blocks are joined by a sliding process called wringing, which causes their ultra-flat surfaces to cling together. A small number of gauge blocks can be used to create accurate lengths within a wide range. By using three blocks at a time taken from a set of 30 blocks, one may create any of the 1000 lengths from 3.000 to 3.999 mm in 0.001 mm steps (or .3000 to .3999 inches in 0.0001 inch steps).

YouTube Encyclopedic

  • 1/4
    Views:
    1 315
    30 298
    32 071
    30 065
  • How do I use gage blocks?
  • C. E. Johansson Gage Block Accessory Set
  • GAUGE BLOCKS & SINE BARS, HOW TO CALCULATE & ASSEMBLE JOE BLOCKS FOR ACCURATE ANGLES, MARC LECUYER
  • How to Stack Gage / Jo Blocks

Transcription

Description

How gauge blocks are measured.

A gauge block is a block of metal or ceramic with two opposing faces ground precisely flat and parallel, a precise distance apart. Standard grade blocks are made of a hardened steel alloy, while calibration grade blocks are often made of tungsten carbide (WC), chromium carbide (CrC) or ceramic (SiO2-based) because they are harder and wear less.[2] Gauge blocks come in sets of blocks of various lengths, along with additional wear blocks, to allow a wide variety of standard lengths to be made up by stacking them. The length of each block is actually slightly shorter than the nominal length stamped on it, because the stamped length includes the length of one wring film, a film of lubricant which separates adjacent block faces in normal use. The thickness of the wring film is about 25 nanometers (0.98 μin).[3] The gauge's nominal length is also known as the interferometric length.[4]

In use, the blocks are removed from the set, cleaned of their protective coating (petroleum jelly or oil) and wrung together to form a stack of the required dimension. Gauge blocks are calibrated to be accurate at 20 °C (68 °F) and should be kept at this temperature when taking measurements. This mitigates the effects of thermal expansion. The wear blocks, made of a harder substance like tungsten carbide, are included at each end of the stack, whenever possible, to protect the gauge blocks from being damaged in use.

Machinists and toolmakers try to use a stack with the fewest blocks to avoid accumulation of size errors. For example, a stack totaling .638 that is composed of two blocks (a .500 block wrung to a .138 block) is preferable to a stack also totaling .638 that is composed of four blocks (such as a .200, .149, .151, and .138 all wrung together). As detailed in the Grades section, each block has a size tolerance of a few millionths of an inch, so stacking them together introduces a cumulative uncertainty. However, the stacked error from even multiple blocks is usually negligible in all but the most demanding uses. In a busy shop, some of the blocks will be in use elsewhere, so one creates a stack from the blocks available at the time. Typically the few millionths of an inch difference will not be detectable, or matter, in the context. Contexts demanding ultimate precision are rarer and require additional expense (for example, more sets of blocks and higher grades of blocks).

Wringing

36 Johansson gauge blocks wrung together easily support their own weight.

Wringing is the process of sliding two blocks together so that their faces bond. Because of their ultraflat surfaces, when wrung, gauge blocks adhere to each other tightly. Properly wrung blocks may withstand a 300 N (67 lbf) pull.[5] The mechanism is a combination of:[4][5][needs update]

  • Vacuum applies pressure between the blocks because the air is squeezed out of the joint[note 1]
  • Surface tension from oil and water vapor that is present between the blocks
  • Molecular attraction that occurs when two very flat surfaces are brought into contact; this force causes gauge blocks to adhere even without surface lubricants, and in a vacuum

It is believed that the last two sources are the most significant.[4] Experiments with friction of the blocks suggest also that the removal of the oxide film from the steel surface by wringing plays an important role in the wringing action.[7]

There is no magnetism involved, although to a user the clinging together of the blocks feels a bit like weak refrigerator magnets sticking together. Unlike magnets, however, the cling only lasts while the blocks are completely joined—the blocks do not attract each other across any visible gap, as magnets would.

The process of wringing involves four steps:[4]

  1. Wiping a clean gauge block across an oiled pad (see the accessories section).
  2. Wiping any extra oil off the gauge block using a dry pad (see the accessories section).
  3. The block is then slid perpendicularly across the other block while applying moderate pressure until they form a cruciform.
  4. Finally, the block is rotated until it is inline with the other block.

After use, the blocks are re-oiled or greased to protect against corrosion. The ability of a given gauge block to wring is called wringability; it is officially defined as "the ability of two surfaces to adhere tightly to each other in the absence of external means." The minimum conditions for wringability are a surface finish of 1 microinch (0.025 μm) AA or better, and a flatness of at least 5 μin (0.13 μm).[4]

There is a formal test to measure wringability. First, the block is prepared for wringing using the standard process. The block is then slid across a 2 in (51 mm) reference grade (1 μin (0.025 μm) flatness) quartz optical flat while applying moderate pressure. Then, the bottom of the gauge block is observed (through the optical flat) for oil or color. For Federal Grades 0.5, 1, and 2 and ISO grades K, 00, and 0 no oil or color should be visible under the gauge block. For Federal Grade 3 and ISO grades 1 and 2, no more than 20% of the surface area should show oil or color. This test is hard to perform on gauge blocks thinner than 0.1 in (2.5 mm) because they tend not to be flat in the relaxed state.[4]

Accessories

A gauge block accessory set
A holder that turns a stack of gauge blocks into an instant, custom caliper or go/no go gauge.

The pictured accessories provide a set of holders and tools to extend the usefulness of the gauge block set. They provide a means of securely clamping large stacks together, along with reference points, scribers, and various shapes of blocks that act like caliper jaws, either external or internal. Conical-tip ones ease measurement of center-to-center distances between hole centers. A stack of gauge blocks with external caliper-jaw accessories, all clamped together, acts as a quickly assembled custom-size go or no-go gauge.

A special gauge block stone that cannot damage the surface is used to remove nicks and burrs to maintain wringability.[4]

There are two wringing pads used to prepare a gauge block for wringing. The first is an oil pad, which applies a light layer of oil to the block. The second is a dry pad, which removes any excess oil from the block after the oil pad has been used.[4]

Grades

Gauge blocks (left in each picture, under optical flat) being used to measure the height of a ball bearing and a plug gage using interferometry. The interference fringes (lines) visible on the surface of the flats indicates error; the number of lines indicates the amount.

Gauge blocks are available in various grades, depending on their intended use.[8] The grading criterion is tightness of tolerance on their sizes; thus higher grades are made to tighter tolerances and have higher accuracy and precision. Various grading standards include: JIS B 7506-1997 (Japan)/DIN 861-1980 (Germany), ASME (US), BS 4311: Part 1: 1993 (UK). Tolerances will vary within the same grade as the thickness of the material increases.

  • reference (AAA): small tolerance (±0.05 μm) used to establish standards
  • calibration (AA): (tolerance +0.10 μm to −0.05 μm) used to calibrate inspection blocks and very high precision gauging
  • inspection (A): (tolerance +0.15 μm to −0.05 μm) used as toolroom standards for setting other gauging tools
  • workshop (B): large tolerance (tolerance +0.25 μm to −0.15 μm) used as shop standards for precision measurement

More recent grade designations include (U.S. Federal Specification GGG-G-15C):

  • 0.5 – generally equivalent to grade AAA
  • 1 – generally equivalent to grade AA
  • 2 – generally equivalent to grade A+
  • 3 – compromise grade between A and B

and ANSI/ASME B89.1.9M, which defines both absolute deviations from nominal dimensions and parallelism limits as criteria for grade determination. Generally, grades are equivalent to former U.S. Federal grades as follows:

  • 00 – generally equivalent to grade 1 (most exacting flatness and accuracy requirements)
  • 0 – generally equivalent to grade 2
  • AS-1 – generally equivalent to grade 3 (reportedly stands for American Standard - 1)
  • AS-2 – generally less accurate than grade 3
  • K – generally equivalent to grade 00 flatness (parallelism) with grade AS-1 accuracy

The ANSI/ASME standard follows a similar philosophy as set forth in ISO 3650. See the NIST reference below for more detailed information on tolerances for each grade and block size. Also consult page 3 of: Commercial Gauge Block Tolerances (Length refers to the calibrated thickness)

Manufacture

Gauge blocks are usually made either from hardened alloy tool steels, ceramics or cemented carbides (such as tungsten carbide or tantalum carbide). Often the carbide has a hardness of 1500 Vickers hardness. Long series blocks are made from high-quality steel having cross section (35 × 9 mm) with holes for clamping two slips together. These are also available in carbon steel material. Steel blocks are hardened and tempered. The hardness is important because it slows down the gauge's rate of wear during use (this is why other kinds of gauges, such as pins, thread plugs, and rings, are also hardened.) The cutting of the blocks to size is accomplished with grinding followed by lapping. Usually no plating or other coating is involved. Blocks are kept very lightly oiled, and are stored and used in dry climate-controlled conditions; unplated, uncoated steel gauge blocks can last for decades without rusting.

History

The gauge block set, also known as "Jo Blocks", was developed by the Swedish inventor Carl Edvard Johansson.[9] Johansson was employed in 1888 as an armourer inspector by the state arsenal Carl Gustafs stads Gevärsfaktori (Rifle Factory of Carl Gustaf's town) in the town of Eskilstuna, Sweden. He was concerned with the expensive tools for measuring parts for the Remington rifles then in production under license at Carl Gustaf. When Sweden adopted a tailored variant of the Mauser carbine in 1894, Johansson was very excited about the chance to study Mauser's methods of measuring, in preparation for production under license at Carl Gustaf (which began several years later). However, a visit to the Mauser factory in Oberndorf am Neckar, Germany, turned out to be a disappointment. On the train home, he thought about the problem, and he came up with the idea of a set of blocks that could be combined to make up any measure.

There had already been a long history of increasing use of gauges up to this time, such as gauges for filing and go/no go gauges, which were custom-made individually in a toolroom for use on the shop floor; but there had never been super-precision gauge blocks that could be wrung together to make up different lengths, as Johansson now envisioned.

Back home, Johansson converted his wife's Singer sewing machine to a grinding and lapping machine. He preferred to carry out this precision work at home, as the grinding machines at the rifle factory were not good enough. His wife, Margareta, helped him with the initial prototyping. Once Johansson had demonstrated his set at Carl Gustaf, his employer provided time and resources for him to develop the idea. Johansson was granted his first Swedish patent on 2 May 1901, SE patent No. 17017, called "Gauge Block Sets for Precision Measurement". Johansson formed the Swedish company CE Johansson AB (also known as 'CEJ') on 16 March 1917.

Johansson spent many years in America; during his life he crossed the Atlantic 22 times.[citation needed] The first CEJ gauge block set in America was sold to Henry M. Leland at the Cadillac Automobile Company around 1908. The first manufacturing plant in America for his gauge block sets was established in Poughkeepsie, Dutchess County, New York, in 1919. The economic environment of the post–World War I recession and depression of 1920–21 did not turn out so well for the company, so in 1923 he wrote a letter to Henry Ford of the Ford Motor Company, where he proposed a cooperation in order to save his company. Henry Ford became interested, and on 18 November 1923 he began working for Henry Ford in Dearborn, Michigan. Hounshell (1984), citing Althin (1948) and various archive primary sources, says, "Henry Ford purchased the famous gaugemaking operation of the Swede C. E. Johansson in 1923 and soon moved it into the laboratory facility in Dearborn. Between 1923 and 1927, the Johansson division supplied 'Jo-blocks' to the Ford toolroom and any manufacturer who could afford them. It also made some of the Ford 'go' and 'no-go' gauges used in production as well as other precision production devices."[10]

In the early 20th century, the U.S. inch was effectively defined as 25.4000508 mm (with a reference temperature of 68 °F (20 °C)) and the U.K. inch at 25.399977 mm (with a reference temperature of 62 °F (17 °C)).[11] When Johansson started manufacturing gauge blocks in inch sizes in 1912, Johansson's compromise was to manufacture gauge blocks with a nominal size of 25.4mm, with a reference temperature of 20 °C (68 °F), accurate to within a few parts per million of both official definitions. Because Johansson's blocks were so popular, his blocks became the de facto standard for manufacturers internationally,[11][12] with other manufacturers of gauge blocks following Johansson's definition by producing blocks designed to be equivalent to his.[13]

In 1930, the British Standards Institution adopted an inch of exactly 25.4 mm. The American Standards Association followed suit in 1933. By 1935, industry in 16 countries had adopted the "industrial inch" as it came to be known,[14][15] effectively endorsing Johansson's pragmatic choice of conversion ratio.[11]

Co-branding of CEJ, Ford, and B&S logos.

In 1936, at the age of 72, Johansson felt it was time to retire and go back to Sweden. He was awarded the large gold medal of the Royal Swedish Academy of Engineering Sciences in 1943, shortly after his death.

In 1948 Brown & Sharpe bought the rights to the C.E. Johansson brand from Ford Motor Co.,[16] and blocks co-branded with the C.E. Johansson and Brown & Sharpe logos were made. Blocks co-branded with the C.E. Johansson and Ford logos are also sometimes still seen in use today.

Gauge pins

Similar to gauge blocks, these are precision-ground cylindrical bars, for use as plug gauges to measure hole diameters, or as parts of go/no go gauges or similar applications.

Gauge rollers and balls

These are supplied as sets of individual rollers or balls as used in roller or ball bearings or tool and die making applications. Calibration balls can be used to calibrate contact angle goniometers, CNC machines and similar equipment.

See also

  • Optical flat – Extremely flat piece of optical-grade glass
  • Cold welding – Welding process in which joining occurs without melting or heating the interface
  • Optical contact bonding – Process whereby two closely conformal surfaces are held together by intermolecular forces.

Notes

  1. ^ In at least one experiment this theory didn't hold.[6]
  1. ^ a b Doiron & Beers 2009, pp. 1–4
  2. ^ Doiron & Beers 2009, p. 12
  3. ^ Doiron & Beers 2009, p. 4
  4. ^ a b c d e f g h Friedel, Dave, Wringability and Gage Blocks, archived from the original on 2011-06-05, retrieved 2010-12-22.
  5. ^ a b Doiron & Beers 2009, pp. 138–139
  6. ^ "Will Gauge Blocks Stick In Vacuum?". YouTube. Feb 15, 2017. Archived from the original on 2021-12-13.
  7. ^ Breki, A.; Nosonovsky, M. (2023). "Friction and adhesion of Johansson gauge blocks". Surface Innovations. 11. doi:10.1680/jsuin.22.01083.
  8. ^ Hugh Jack: Engineer On a Disk, Grand Valley State University, 2001
  9. ^ Althin 1948.
  10. ^ Hounshell 1984, p. 286.
  11. ^ a b c "The History of Gauge Blocks" (PDF). mitutoyo.com. Mitutoyo Corporation. 2013. p. 8. Retrieved 2020-02-01.
  12. ^ Gaillard, John (October 1943). Industrial Standardization and Commercial Standards Monthly. p. 293. Retrieved 2020-02-01.
  13. ^ Cochrane, Rexmond C. (1966). Measures for Progress. NIST Special Publication, isue 275. U.S. Government Printing Office. p. 200. LCCN 65-62472.
  14. ^ National Conference on Weights and Measures; United States. Bureau of Standards; National Institute of Standards and Technology (US) (1936). Report of the ... National Conference on Weights and Measures. US Department of Commerce, Bureau of Standards. p. 4. Retrieved 2 August 2012.
  15. ^ Wandmacher, Cornelius; Johnson, Arnold Ivan (1995). Metric Units in Engineering--going SI: How to Use the International Systems of Measurement Units (SI) to Solve Standard Engineering Problems. ASCE Publications. p. 265. ISBN 978-0-7844-0070-8. Retrieved 2 August 2012.
  16. ^ Carbone, Gerald M. (21 March 2017). Brown & Sharpe and the Measure of American Industry: Making the Precision Machine Tools That Enabled Manufacturing, 1833-2001. ISBN 9781476629193.

References

Further reading

External links

This page was last edited on 8 March 2024, at 23:14
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.