To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

From Wikipedia, the free encyclopedia

Boeing 777 flaperon
Flaperons on a Denney Kitfox Model 3, built in 1991
Flaperons (Junkers style) on an ICP Savannah Model S, built in 2010
Work of the flaperon of Boeing 777

A flaperon (a portmanteau of flap and aileron) on an aircraft's wing is a type of control surface that combines the functions of both flaps and ailerons. Some smaller kitplanes have flaperons for reasons of simplicity of manufacture, while some large commercial aircraft such as the Boeing 747, 767, 777, and 787 may have a flaperon between the flaps and aileron. The 787 has a configuration known as a SpoileFlaperon that combines the action of spoilers, flaps and ailerons into one control surface.

YouTube Encyclopedic

  • 1/5
    Views:
    6 119
    40 568
    57 374
    6 526
    10 470
  • From the Field -- E-flite F-16 80mm EDF Flaperons & Tailerons Testing | The RC Geek
  • FlySky FS-i6X How to Setup Flaperons - 2-Position Flaperons mix with i6X and iA6B Rx Tutorial Guide
  • SPOILERONS vs FLAPERONS?
  • Easy Setup Of The FT Aura 5 For Flaperon And Mixing - From Basic to Advance
  • Set Up Flaperons on your RC Airplane

Transcription

Operation

In addition to controlling the roll or bank of an aircraft, as do conventional ailerons, both flaperons can be lowered together to reduce stall speed, similarly to a set of flaps.

On a plane with flaperons, the pilot still has the standard separate controls for ailerons and flaps, but the flap control also varies the flaperon's range of movement. A mechanical device called a "mixer" is used to combine the pilot's input into the flaperons. While the use of flaperons rather than ailerons and flaps might seem to be a simplification, some complexity remains through the intricacies of the mixer.

Some aircraft, such as the Denney Kitfox, suspend the flaperons below the wing (rather in the manner of slotted flaps) to provide undisturbed airflow at high angles of attack or low airspeeds.[1] When the flaperon surface is hinged below the trailing edge of a wing, they are sometimes named "Junkers flaperons", from the doppelflügel (lit., "double wing") type of trailing edge surfaces used on a number of Junkers aircraft of the 1930s, such as the Junkers Ju 52 airliner, and the iconic Junkers Ju 87 Stuka World War II dive bomber.[citation needed]

Research

Research seeks[when?] to coordinate the functions of aircraft flight control surfaces (ailerons, elevators, elevons, flaps, and flaperons) so as to reduce weight, cost, drag, and inertia, and thereby achieve improved control response, reduced complexity, and reduced radar visibility for stealth purposes. Beneficiaries of such research might include drones (UAVs) and the latest fighter aircraft.[citation needed]

These research approaches include flexible wings and fluidics:

Flexible wings

In flexible wings, much or all of a wing surface can change shape in flight to deflect air flow. The X-53 Active Aeroelastic Wing is a NASA effort. The Adaptive Compliant Wing is a military and commercial effort.[2][3][4] This may be seen as a return to the wing warping used and patented by the Wright brothers.

Fluidics

In fluidics, forces in vehicles occur via circulation control,[clarification needed] in which larger, more complex mechanical parts are replaced by smaller simpler fluidic systems (slots which emit air flows), where larger forces in fluids are diverted by smaller jets or flows of fluid intermittently, to change the direction of vehicles.[5][6][7] In this use, fluidics promises lower mass and costs (as little as half), and very low inertia and response times, as well as simplicity.[citation needed][clarification needed]

See also

References

  1. ^ "LAA Type Acceptance Data Sheet Issue 7 Rev A" (PDF). Light Aircraft Association Data Sheet. March 2, 2021. Retrieved January 3, 2022.
  2. ^ Scott, William B. (27 November 2006), "Morphing Wings", Aviation Week & Space Technology, archived from the original on 26 April 2011, retrieved 27 April 2011
  3. ^ "FlexSys Inc.: Aerospace". Archived from the original on 2011-06-16. Retrieved 2011-04-26.
  4. ^ Kota, Sridhar; Osborn, Russell; Ervin, Gregory; Maric, Dragan; Flick, Peter; Paul, Donald. "Mission Adaptive Compliant Wing – Design, Fabrication and Flight Test" (PDF). Ann Arbor, MI; Dayton, OH, U.S.A.: FlexSys Inc., Air Force Research Laboratory. Archived from the original (PDF) on 2012-03-22. Retrieved 2011-04-26.
  5. ^ P John (2010). "The flapless air vehicle integrated industrial research (FLAVIIR) programme in aeronautical engineering". Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. London: Mechanical Engineering Publications. 224 (4): 355–363. doi:10.1243/09544100JAERO580. hdl:1826/5579. ISSN 0954-4100. S2CID 56205932. Archived from the original on 2018-05-17.
  6. ^ "Showcase UAV Demonstrates Flapless Flight". BAE Systems. 2010. Archived from the original on 2011-07-07. Retrieved 2010-12-22.
  7. ^ "Demon UAV jets into history by flying without flaps". Metro.co.uk. London: Associated Newspapers Limited. 28 September 2010.
This page was last edited on 26 February 2024, at 09:53
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.