To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

From Wikipedia, the free encyclopedia

In plumbing, a Fixture Unit (FU) or Drain Fixture Unit (DFU) is "a unit of measure, based on the rate of discharge, time of operation and frequency of use of a fixture, that expresses the hydraulic load imposed by that fixture on the sanitary plumbing installation".[1] A Fixture Unit is not a flow rate unit but a design factor. A fixture unit is equal to 1 cubic foot (0.028 m3) of water drained in a 1+14 inches (32 mm) diameter pipe over one minute.[2] One cubic foot of water is roughly 7.48 US gallons (28.3 L; 6.23 imp gal). A Fixture Unit is used in plumbing design for both water supply and waste water.

Different fixtures have different flow requirements. In order to determine the required size of pipe, an arbitrary unit is used for pipe sizing which takes into account the likelihood that all the fixtures will not be used at the same time. This is called "fixture unit" (FU). The relationship between gallons per minute (gpm) and fixture unit is not constant, but varies with the number of fixture units. For example, 1000 FU is equivalent to 220 US gallons per minute (0.014 m3/s) while 2000 FU represents only 330 US gallons per minute (0.021 m3/s), about 1.5 times the flow rate.

Fixture unit values can be determined using charts from the International Plumbing Code or similar codes in local jurisdictions.

There are situations where a design provides for more FUs being discharged than being supplied. This occurs in situations where liquids may infiltrate or are added to a draining system, such as might happen in a large sports venue. Examples of how this could occur include rain water infiltration.

YouTube Encyclopedic

  • 1/3
    Views:
    4 986
    715
    8 162
  • Drainage Fixture Units 1
  • ROBSPOT PPT VIDEO PART 1 (INTRODUCTION OF BIW FIXTURES)
  • Mechanical engineering Interview Questions ,Dimu's Tutorials,jig and fixtures

Transcription

References

  1. ^ Limited., Standards Australia International (2003). Plumbing and drainage. Part 0, Glossary of terms. Standards New Zealand. (3rd ed.). Sydney, N.S.W.: Standards Australia International. ISBN 0733755240. OCLC 155925252.
  2. ^ Available at: https://mycomfortheroes.com/expert-tips/what-is-dfu-drainage-fixture-unit/ [Accessed March 14, 2020]


This page was last edited on 14 July 2022, at 16:19
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.