To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

File:PV solar installers on sloped roof.jpg

From Wikipedia, the free encyclopedia

Original file(2,856 × 2,142 pixels, file size: 1.38 MB, MIME type: image/jpeg)

Summary

Technicians installing photovoltaic solar array on a high tilt rack located on a sloped roof. Building located at 2415 Prospect Street in Berkeley, California. Photo taken in September 2010 by Alfred Twu.

This picture is a good example of how not to install solar. The wind load on the North roof is increased by the exposed under side of the panel and in strong winds could easily rip the roof off. A good structural engineer would not sign off on this design nor would any educated building inspector. Understanding both the lift and load forces of a solar array on a roof are important for both the longevity of the system and the building.

A properly installed solar array will last 30 years and reduce the environmental degradation of the roof by sheltering it from the harmful UV rays while reducing the cooling load on the building. A poorly installed system such as this will be buffeted by winds which causes the lag bolts to loosen in the roof trusses, breaking the seal of any caulking designed to protect against water infiltration and eventually allow the wood to rot. This will allow the lag bolts to be pulled out during a medium wind storm and the upper array will flip over onto onto the lower panels on the front or collapse backwards onto the back roof deck. The failure may only be partial in which the rack will twist which could lead to the tempered glass in some of the panels breaking rendering the electrical connections open to moisture and short circuits.

In the event of a heavy wind storm, unless the roof was built with properly fastened hurricane clips at each truss, the entire roof could be lifted and torn off. From the age of this building it is highly unlikely that it has hurricane clips. When installing solar, it is a small investment to get it structurally certified and if required in your area, a building permit and inspection.

Licensing

I, the copyright holder of this work, hereby publish it under the following license:

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current06:57, 22 December 2011Thumbnail for version as of 06:57, 22 December 20112,856 × 2,142 (1.38 MB)Firstcultural (talk | contribs)Technicians installing photovoltaic solar array on a high tilt rack located on a sloped roof. Building located at 2415 Prospect Street in Berkeley, California. Photo taken in September 2010 by Alfred Twu.
The following pages on the English Wikipedia use this file (pages on other projects are not listed):

Metadata

This page was last edited on 13 September 2013, at 16:55
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.