File:Astrobotic's CubeRover (KSC-20220630-PH-GEB01 0096).jpeg

Original file ‎(3,780 × 6,720 pixels, file size: 18.57 MB, MIME type: image/jpeg)

This is a file from the Wikimedia Commons. Information from its description page there is shown below.
Commons is a freely licensed media file repository. You can help.

Summary

Description

Robotics Software Engineer II Chris Rampolla runs benchtop verifications on Astrobotic’s CubeRover – a lightweight, modular planetary rover – before delivery to Swamp Works at NASA’s Kennedy Space Center in Florida on June 30, 2022. Astrobotic – a Pittsburgh-based space robotics company – is planning to use Swamp Work’s Granular Mechanics and Regolith Operations Laboratory’s regolith bin, which holds approximately 120 tons of lunar regolith simulant, to depict how the company’s CubeRover would perform on the Moon. NASA’s Small Business Innovation Research program provided the funding for initial development, and a $2 million Tipping Point award from the agency has provided additional funding for continued development into a more mature rover.

Date

Taken on 30 June 2022

Source

This image or video was catalogued by Kennedy Space Center of the United States National Aeronautics and Space Administration (NASA) under Photo ID: KSC-20220630-PH-GEB01_0096.

This tag does not indicate the copyright status of the attached work. A normal copyright tag is still required. See Commons:Licensing.

Other languages:

العربية ∙ беларуская (тарашкевіца) ∙ български ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ English ∙ español ∙ فارسی ∙ français ∙ galego ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ македонски ∙ മലയാളം ∙ Nederlands ∙ polski ∙ português ∙ русский ∙ sicilianu ∙ slovenščina ∙ Türkçe ∙ українська ∙ 简体中文 ∙ 繁體中文 ∙ +/−

Author

NASA Kennedy Space Center / NASA/Glenn Benson

Licensing

	This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
	Warnings: Use of NASA logos, insignia and emblems is restricted per U.S. law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not necessarily in the public domain. Materials based on Hubble Space Telescope data may be copyrighted if they are not explicitly produced by the STScI.[1] See also {{PD-Hubble}} and {{Cc-Hubble}}. The SOHO (ESA & NASA) joint project implies that all materials created by its probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3] The National Space Science Data Center (NSSDC) site has been known to host copyrighted content. Its photo gallery FAQ states that all of the images in the photo gallery are in the public domain "Unless otherwise noted."

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	00:13, 23 January 2023		3,780 × 6,720 (18.57 MB)	<bdi>OptimusPrimeBot</bdi>	#Spacemedia - Upload of http://images-assets.nasa.gov/image/KSC-20220630-PH-GEB01_0096/KSC-20220630-PH-GEB01_0096~orig.jpg via Commons:Spacemedia

File usage

The following pages on the English Wikipedia use this file (pages on other projects are not listed):

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon EOS 5D Mark IV
Author	NASA/Glenn Benson
Copyright holder	For copyright and restrictions, refer to http://www.nasa.gov/multimedia/guidelines/index.html
Exposure time	1/500 sec (0.002)
F-number	f/2.8
ISO speed rating	3,200
Date and time of data generation	10:49, 30 June 2022
Lens focal length	20 mm
Label	Approved
Headline	AFS-8/101
Credit/Provider	NASA/Glenn Benson
Source	Digital Still Image
Short title	Astrobotic's Cuberover
Image title	Robotics Software Engineer II Chris Rampolla runs benchtop verifications on Astrobotic’s CubeRover – a lightweight, modular planetary rover – before delivery to Swamp Works at NASA’s Kennedy Space Center in Florida on June 30, 2022. Astrobotic – a Pittsburgh-based space robotics company – is planning to use Swamp Work’s Granular Mechanics and Regolith Operations Laboratory’s regolith bin, which holds approximately 120 tons of lunar regolith simulant, to depict how the company’s CubeRover would perform on the Moon. NASA’s Small Business Innovation Research program provided the funding for initial development, and a $2 million Tipping Point award from the agency has provided additional funding for continued development into a more mature rover.
Usage terms	PAO Approved For Release
City shown	KSC
Orientation	Normal
Horizontal resolution	240 dpi
Vertical resolution	240 dpi
Software used	Adobe Photoshop Lightroom Classic 11.4.1 (Windows)
File change date and time	13:01, 5 July 2022
Exposure Program	Manual
Exif version	2.31
Date and time of digitizing	10:49, 30 June 2022
Shutter speed	8.965784
APEX aperture	2.970854
Exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	68
DateTimeDigitized subseconds	68
Color space	sRGB
Focal plane X resolution	1,866.6666564941
Focal plane Y resolution	1,866.6666564941
Focal plane resolution unit	3
Custom image processing	Normal process
Exposure mode	Manual exposure
White balance	Auto white balance
Scene capture type	Standard
Serial number of camera	302057001793
Lens used	EF16-35mm f/2.8L III USM
Date metadata was last modified	08:07, 11 July 2022
Special instructions	06/30/2029
Unique ID of original document	182233C3E556B003CA9AD469DBD9ED1E
Keywords	Astrobotics CubeRover Swamp Works regolith
Sublocation of city shown	Swamp Works
IIM version	4

Retrieved from "https://en.wikipedia.org/wiki/File:Astrobotic%27s_CubeRover_(KSC-20220630-PH-GEB01_0096).jpeg"

File:Astrobotic's CubeRover (KSC-20220630-PH-GEB01 0096).jpeg

From Wikipedia, the free encyclopedia

Summary

Licensing

Captions

Items portrayed in this file

depicts

inception

30 June 2022

captured with

Canon EOS 5D Mark IV

exposure time

0.002 second

f-number

2.8

focal length

20 millimetre

ISO speed

3,200

media type

image/jpeg

instance of

photograph

checksum

ad93e5f8577ecbff63689ceeb06433139963bfac

data size

19,477,014 byte

height

6,720 pixel

width

3,780 pixel

File history

File usage

Metadata