format (command)

format

The MS-DOS FORMAT command
Written in	MS-DOS: x86 assembly language FreeDOS: C
Operating system	RT-11, 86-DOS, MS-DOS, PC DOS, OS/2, eComStation, ArcaOS, ISIS-II, iRMX 86, TRIPOS, AmigaDOS, Z80-RIO, OS-9, MSX-DOS, FlexOS, PC-MOS, SpartaDOS X, DR DOS, ROM-DOS, 4690 OS, FreeDOS, PTS-DOS, SISNE plus, Windows, ReactOS
Platform	Cross-platform
Type	Command
License	MS-DOS: MIT PC-MOS: GPLv3 FreeDOS: GPLv2 ReactOS: LGPL-2.0-or-later

In computing, format, a command-line utility that carries out disk formatting. It is a component of various operating systems, including 86-DOS, MS-DOS, IBM PC DOS and OS/2, Microsoft Windows and ReactOS.

Overview

The command performs the following actions by default on a floppy disk, hard disk drive, solid state (USB), or other magnetic medium (it will not perform these actions on optical media):

1. clearing the FAT entries by changing them to 0x00
2. clearing the FAT root directory by changing any values found to 0x00^{[nb 1][1][2][3]}
3. checking each cluster to see if it is good or bad and marking it as good or bad in the FAT

Any storage device must have its medium structured to be useful. This process is referred to^[by whom?] as "creating a filesystem" in Unix, Linux, or BSD.^[4] Under these systems different commands are used. The commands can create many kinds of file systems, including those used by DOS, Windows, and OS/2.

Implementations

The command is also available in Intel ISIS-II,^[5] iRMX 86,^[6] MetaComCo TRIPOS,^[7] AmigaDOS,^[8] Zilog Z80-RIO,^[9] Microware OS-9,^[10] DR FlexOS,^[11] TSL PC-MOS,^[12] SpartaDOS X,^[13] Datalight ROM-DOS,^[14] IBM/Toshiba 4690 OS,^[15] PTS-DOS,^[16] SISNE plus,^[17] and in the DEC RT-11^[18] operating system.

Microsoft DOS and Windows

On MS-DOS, the command is available in versions 1 and later.^[19]

Optionally (by adding the /S, for "system" switch), format can also install a Volume Boot Record. With this option, Format writes bootstrap code to the first sector of the volume (and possibly elsewhere as well). Format always writes a BIOS Parameter Block to the first sector, with or without the /S option.

Another option (/Q) allows for what Microsoft calls "Quick Format". With this option the command will not perform steps 2 and 3 above.^{[citation needed]} Format /Q does not alter data previously written to the media.

Typing "format" with no parameters in MS-DOS 3.2 or earlier would automatically, without prompting the user, format the current drive; however in MS-DOS 3.3 and later it would simply produce the error: "required parameter missing".^{[citation needed]}

DR/Novell DOS

DR DOS 6.0 includes an implementation of the format command.^[20]

FreeDOS

The FreeDOS version was developed by Brian E. Reifsnyder and is licensed under the GPL.^[21]

ReactOS

The ReactOS implementation is based on a free clone developed by Mark Russinovich for Sysinternals in 1998. It is licensed under the GPL.^[22] It was adapted to ReactOS by Emanuele Aliberti in 1999 and supports FAT, FAT32, FATX, EXT2, and BtrFS filesystems.

See also

• Disk formatting
• Data recovery
• convert
• File Allocation Table
• Design of the FAT file system
• fdisk
• PC DOS 7.10 Format32

Notes

References

Further reading

• Cooper, Jim (2001). Special Edition Using MS-DOS 6.22, Third Edition. Que Publishing. ISBN 978-0789725738.
• Kathy Ivens; Brian Proffit (1993). OS/2 Inside & Out. Osborne McGraw-Hill. ISBN 978-0078818714.
• Frisch, Æleen (2001). Windows 2000 Commands Pocket Reference. O'Reilly. ISBN 978-0-596-00148-3.

External links

Wikibooks has a book on the topic of: Guide to Windows Commands

• Microsoft Windows XP Professional Product Documentation: "format"
• Open source FORMAT implementation that comes with MS-DOS v2.0
• MSKB255867: How to Use the Fdisk Tool and the Format Tool to Partition or Repartition a Hard Disk
• Microsoft DOS format command
• Recovery Console format command

This page was last edited on 7 March 2024, at 16:51