To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Dynasphere (vehicle)

From Wikipedia, the free encyclopedia

John Archibald Purves' Dynasphere on the beach, 1932. The driver is his son.[1]

The Dynasphere (sometimes misspelled Dynosphere[2]) is a monowheel vehicle design patented in 1930 by John Archibald Purves FRSE (7 August 1870 – 4 November 1952[3]) from Taunton, Somerset, UK.[4][5]

Purves' idea for the vehicle was inspired by a sketch made by Leonardo da Vinci.[6]

Design

Two prototypes were initially built: a smaller electrical model, and one with a gasoline motor[1] that attained either 2.5[7] or 6[8] horse power depending on the source consulted, using a two-cylinder air-cooled Douglas engine with a three speed gear box, also providing reverse.[8] The Dynasphere model reached top speeds of 25–30 miles per hour (40–48 km/h).[1][8] The gasoline-powered prototype was 10-foot (3.0 m) high and built of iron latticework that weighed 1,000 pounds (450 kg).[1] The next generation version had ten outer hoops, covered with a leather lining, shaped to present a small profile to the ground.[8]

The driver's seat and the motor were part of one unit, mounted with wheels upon the interior rails of the outer hoop.[1] The singular driving seat and motor unit, when powered forward, would thus try to "climb" up the spherical rails, which would cause the lattice cage to roll forward.[8] Steering of the prototype was crude, requiring the driver to lean in the direction sought to travel, though Purves envisioned future models equipped with gears that would shift the inner housing without leaning, thus tipping the Dynasphere in the direction of travel.[1] The later ten-hoop model had a steering wheel engaging such tipping gears, and was captured in a 1932 Pathé newsreel, in which the vehicle's advantages are first described and then demonstrated at the Brooklands motor racing circuit.[9] Beatrice Shilling and the inventor's son C E Purves subjected the model to a road test, which included an attempt to pull it over.[10] A novelty model was later constructed by Purves that could seat eight passengers, the "Dynasphere 8", made specifically for beach use.[11]

History

Purves was optimistic about his invention's prospects. As reported in a 1932 Popular Science magazine article, after a filmed test drive in 1932 on a beach in Weston-super-Mare, Somerset, he stated that the Dynasphere "reduced locomotion to the simplest possible form, with consequent economy of power",[1] and that it was "the high-speed vehicle of the future".[1] An article in the February 1935 issue of Meccano Magazine noted that though the Dynasphere was only at an experimental stage, "it possesses so many advantages that we may eventually see gigantic wheels similar to that shown on our cover running along our highways in as large numbers as motor cars do to-day."[8] According to the 2007 book Crazy Cars, one reason the Dynasphere did not succeed was that "while the [vehicle] could move along just fine, it was almost impossible to steer or brake."[6] Another aspect of the vehicle that received criticism was the phenomenon of "gerbiling"—the tendency when accelerating or braking the vehicle for the independent housing holding the driver within the monowheel to spin within the moving structure.[12]

See also

References

  1. ^ a b c d e f g h "Amazing Motor-Driven Hoop May be Car of the Future". Popular Science. 120 (5). Bonnier Corporation: 63. May 1932. ISSN 0161-7370.
  2. ^ "Rolling but not Rio". Tyrone Daily Herald. Tyrone, PA. 1932-03-08. p. 6.
  3. ^ "Former Royal Society of Edinburgh Fellows 1783 - 2002" (PDF). The Royal Society Of Edinburgh. p. 756. Archived from the original (PDF) on 2014-01-16. Retrieved 2012-03-21.
  4. ^ "In pictures: Dynasphere testing on Weston beach in 1932". BBC News. 2009-12-23. Retrieved 2010-09-05.
  5. ^ U.S. patent 2,009,904, filed 16 September 1931; issued 30 July 1935. Retrieved on 21 March 2012.
  6. ^ a b Doeden, Matt (2007). Crazy Cars. Minneapolis, MN: Lerner Publications. p. 35. ISBN 978-0-8225-6565-9.
  7. ^ "How many wheels does a car need?: Purves Dynasphere" (PDF). Haynes Publishing. Retrieved 2010-05-09.
  8. ^ a b c d e f "Rolling Along—Modern Style". Meccano Magazine. XX (2). Meccano Ltd. February 1935. Archived from the original on 2008-05-03.
  9. ^ 1932 newsreel: Dynasphere described and demonstrated at the Brooklands motor racing circuit (1932) from British Pathé (Record No:2766) at YouTube
  10. ^ "The Dynasphere". IET Archives blog. 2022-11-15. Retrieved 2023-03-11.
  11. ^ "Riding Inside the Tire of the New One-Wheel Motor Car". The Troy Call. Troy, IL. 1933-08-18. p. 3.
  12. ^ Svoboda, Elizabeth (January 2004). "Careful: Too Fast and You'll Start Gerbiling". Popular Science. 264 (1). Bonnier Corporation: 112. ISSN 0161-7370. Retrieved 2023-03-31.

External links

This page was last edited on 8 June 2024, at 16:33
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.